151 replies to this topic

[tivimac]

The new version (v3) works without problems (you'll have to change the id on the kext though)

To Do for this kext:  Memory Stick/XD

Also with this revision, is possible to boot with with the SD Card inserted.

[Slice]

quinielascom, on Dec 24 2008, 10:12 PM, said:

I test this new release here are results:

1.- Minimum Processor usage (less 10%)
2.- Double speed rate (read/write)
3.- Support SDHC Cards (Still no tested)

I used the Xbench v1.3 Application below some screenshots

Attach the new release with string 0x08221180 already changed.

IOSDHCIB...ice.kext.zip

Thanks to all developers for this great work.

Thank you for this! Works fine!
Read ~ 1,65Gb @ 160sec  Write 32Mb @ 5 sec.
I think you need to update the topic.

[aliasa_anderson]

Slice, on Dec 25 2008, 05:15 PM, said:

Thank you for this! Works fine!
Read ~ 1,65Gb @ 160sec Write 32Mb @ 5 sec.
I think you need to update the topic.

I dont know why but it doesnt seem to work for me!!!
When i reboot after changing perm/ownerships,deleting the mkext and doing kextcache -k /S/L/E .
I find that the meaasges during verbose scroll slowly,then i get IOKitTimeouts and black screen only,i had to remove the kext.I used the kext with 0x08221180.
Am I missing something ?

[hackinthebox]

Im getting almost the same problem... I'm getting these messages:

class "AppleEHCIedMemoryBlock" is duplicate
Duplicate class
kmod_control/start failed for com.orByte.driver.PCGenUSBEHCI; destroying kmod
Failed to load extension com.orByte.driver.PCGenUSBEHCI.
Class "AppleEHCIedMemoryBlock" is duplicate

I can't find a duplicate kext, and everything seems to fail after I load the iosdhciblockdevice kext...
I have to go into -s mode, delete kext, clear extensions cache and then reboot, otherwise
I get a blue screen forever and evers. Can someone help meeee??  

I don't know what I'm doing wrong... here is my output from lspci if it helps:

00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212 802.11abg NIC [168c:1014] (rev 01)
15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04)
15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
15:00.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
15:00.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 11)
15:00.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 11)

[gondor69]

Hi, tried it with:

07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]

No success so far...

[Slice]

hackinthebox, on Dec 28 2008, 07:16 AM, said:

class "AppleEHCIedMemoryBlock" is duplicate
Duplicate class
kmod_control/start failed for com.orByte.driver.PCGenUSBEHCI; destroying kmod
Failed to load extension com.orByte.driver.PCGenUSBEHCI.
Class "AppleEHCIedMemoryBlock" is duplicate

Don't use com.orByte.driver.PCGenUSBEHCI. It is too old! And conflict with AppleUSBEHCI.kext.
Both located in IOUSBFamily/Contents/PlugIns/

gondor69, on Dec 28 2008, 02:17 PM, said:

Hi, tried it with:

07:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
07:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
07:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]

No success so far...

This kext is not for Texas, only for Ricoh.

[Boombeng]

Thanks!

I confirm it works now with SDHC (tested with 4GB EMTEC class 4)
When i boot with a card in, i can not unmount it

SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)

[gondor69]

Slice, on Dec 28 2008, 05:54 PM, said:

Don't use com.orByte.driver.PCGenUSBEHCI. It is too old! And conflict with AppleUSBEHCI.kext.
Both located in IOUSBFamily/Contents/PlugIns/


This kext is not for Texas, only for Ricoh.

And there's no way to adapt it to Texas, right??

too bad...

[kizwan]

gondor69, on Jan 2 2009, 05:42 PM, said:

And there's no way to adapt it to Texas, right??

too bad...

Yeahh! Too bad....

Can we add vendor & device id for Texas Instrument card reader in the source code & compile it? Or do we need know more like memory address used by the device?

kizwan

[Cris900]

this driver work with this

PCI\VEN_1180&DEV_0822&SUBSYS_01211025&REV_22
PCI\VEN_1180&DEV_0822&SUBSYS_01211025
PCI\VEN_1180&DEV_0822&CC_080500
PCI\VEN_1180&DEV_0822&CC_0805

?????
My notebook is Acer Aspire 5920G....thanks

[MiniBUU]

Just installed the latest drivers on my Dell Inspiron 1525 and glad to say I can now see my 4gig sd card with no problem. Thanks a million quinielascom for the find and efforts to bring this project to light.

[macgirl]

Thanks, will test, although my SD card is not HC

[nvanberkel]

Only tested SD Card, working on HPDV6700. Thanks!

[BenJii]

Just Tested SD cards and SD-HC cards, and working realy fine on Hp Dv2500..... Thanks so much ciao

[macgirl]

Still no luck, everything freezes when I insert the SD card

[djmastera2000]

macgirl, on Jan 5 2009, 11:21 PM, said:

Still no luck, everything freezes when I insert the SD card

Same here... Which IOPCIFamily do you use?

[Boombeng]

I use the original 10.5.6 IOPCIfamily and the driver works well with SD and SDHC, i just tested the latest version with sleep support (needed to edit device in plist) and still working well...

[djmastera2000]

"Final" Candidate 1 released: http://sourceforge.n...lease_id=651471

Not tested yet...

[Boombeng]

I didn't test neither, but they don't tell what is the new stuff in it... a surprise ?  

[djmastera2000]

Sorry, didn't find any changes yet...

But with this version still freezes if card inserted, used with last chunnans' iopcmciafamily.kext.
With vanilla iopcifamily(leo 10.5.6) no boot(freez, no crash, no errors) with no card inserted!

I don't know why it freezes...


PS: Pre-patched fc1 version with 0x08221180 id attached.

Attached Files

•  IOSDHCIBlockDevice_fc1.kext.zip   34.3K   83 downloads