ngonzal Posted July 19, 2008 Share Posted July 19, 2008 Just installed it, working for the most part! I got a message saying that the "Jmicron kernel failed to load" but it hasn't affected anything so far as I can see.. I selected the: iATKOS Main System Darwin Bootloader AppleACPIPlatform nvidia NCInject 512mb Driver Sata Support Intel Speedstep Realtek 8139 I can't remember if I chose the 9.4 Kernel or not Somewhere in there it said something about not choosing any other kernels if using speedstep. But it looks like it's all working. I'm gonna try it out and see how it works with my MB. Kalyway seemed a lot more focused on the P5W DH, so I might just stick with that if this isn't noticeably faster. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825213 Share on other sites More sharing options...
juzio Posted July 19, 2008 Share Posted July 19, 2008 When I switch in the motherboard bios from SATA AHCI to SATA IDE and don't customize, I was able to install this version successfuly.I need advice witch patch to install for D975XBX2 BAD AXE. I am new to OSx86 Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825236 Share on other sites More sharing options...
maykmac Posted July 19, 2008 Share Posted July 19, 2008 can't wait to try this on Dell Vostro 200 Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825239 Share on other sites More sharing options...
Espionage724 Posted July 19, 2008 Share Posted July 19, 2008 Yeah, Ive been stuck at 99.11% for quite sometime now. Their are over 2000 leechers and still just 2 seeders. Hopefully later today it will finish. As far as I've read the Jmicron support is still hit and miss with this version. However their are supposed to be a lot of updates and enhancements for sata and even better support for speedstep. U serious? I managed to have it done downloading in a few hours (Between 2-4 Hrs I say) Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825503 Share on other sites More sharing options...
anti_user Posted July 19, 2008 Share Posted July 19, 2008 This build of mac fully work on my Hewlett Packard HP530!!!!!! Great success! Much Thanks to you hardly man Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825512 Share on other sites More sharing options...
dcxx20 Posted July 19, 2008 Share Posted July 19, 2008 Installed on Dell D520. Works fine with nothing selected except "iATKOS Main System" and "Darwin Bootloader". Ethernet and wireless card are not working at this moment. If I select the additional Intel GMA 950 driver, it would boot but with a blank screen. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825869 Share on other sites More sharing options...
habhab Posted July 20, 2008 Share Posted July 20, 2008 i can't download this, it says 3 downloads a week for nn registred, Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825877 Share on other sites More sharing options...
shawn22 Posted July 20, 2008 Share Posted July 20, 2008 there are a few bugs liek if u update nvidia u cant restart Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825899 Share on other sites More sharing options...
arkamaxx Posted July 20, 2008 Share Posted July 20, 2008 I have installed it on a ga-ep35-ds4 board with q6600 proc. Intsallation went fine BUT when it restarts, it does not boot into the OS. Someboody can help please? Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825947 Share on other sites More sharing options...
ngonzal Posted July 20, 2008 Share Posted July 20, 2008 I had a problem with it cycling whenever I rebooted or shutdown. I would have to start with the -v command at Darwin. A simple Permissions repair took care of this. I also installed the latest NVInstaller to get quartz working. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825990 Share on other sites More sharing options...
frefrefrer Posted July 20, 2008 Share Posted July 20, 2008 working perfect for me just the network was not working but i had the extra drivers for that one also but the strange part is that my audio and graphic are installed automatically . i have not selected any driver for that but that a good news . i hope in future we dont have to select the drivers just they automotically installed by itself like in windows. well anyway thanks for all and uphuck Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-825992 Share on other sites More sharing options...
teecee Posted July 20, 2008 Share Posted July 20, 2008 Successful. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-826017 Share on other sites More sharing options...
Aries326 Posted July 20, 2008 Share Posted July 20, 2008 Anyone try this out yet with a Inspiron 1525? I just picked up this laptop and I'm debating whether or not I should go ahead with the Kalyway 10.5.2 installer disk or go with iAtkos 10.5.4 instead. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-826025 Share on other sites More sharing options...
DrFruit Posted July 20, 2008 Share Posted July 20, 2008 Just to confirm that this is working fantastically on the Intel BadAxe2 D975XBX2 motherboard. Picked stock ACPI and Stock kernel for the installation. Once in OSX applied the sound patch as provided by the fantastic WeakSauce guide and applied the NVInstallerV41 package for my 8800GT 512mb. All working so far but not tested sleep as of yet. I'm getting around 150 points better in Geekbench with this release compared to the Kalyway 10.5.2 release. If anyone wants any additional info about the build please let me know. regards, Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-826452 Share on other sites More sharing options...
edgar87 Posted July 20, 2008 Share Posted July 20, 2008 I had a problem with it cycling whenever I rebooted or shutdown. I would have to start with the -v command at Darwin. A simple Permissions repair took care of this. I also installed the latest NVInstaller to get quartz working. and what was your installation configuration? (stock files? smbios? ...) because i have the same motherboard as you, but i can't get it working. (sorry for my bad english!) Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-826480 Share on other sites More sharing options...
Alpha4 Posted July 20, 2008 Share Posted July 20, 2008 i'm stuck with a blinking line. i've tried guid and mbr partition. I don't know witch kind of kernel i've to use to get my computer boot. the mobo is a Gigabyte g33m ds2r vga 8800gt Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-826569 Share on other sites More sharing options...
ufo_all Posted July 20, 2008 Share Posted July 20, 2008 I've tried on sse2 ( core 2 dual ) it fails at 5 percent. even i left comments on mininova not to download. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-826580 Share on other sites More sharing options...
DA_SONG_MAN Posted July 20, 2008 Share Posted July 20, 2008 Don't give bad rep as you couldn't install properly. BTW I think the Core 2 Range (i.e. Duo, Quad or Extreme) as I know all support SSE3 and not only SSE2 as you said ufo_all. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-827031 Share on other sites More sharing options...
ufo_all Posted July 21, 2008 Share Posted July 21, 2008 Don't give bad rep as you couldn't install properly. BTW I think the Core 2 Range (i.e. Duo, Quad or Extreme) as I know all support SSE3 and not only SSE2 as you said ufo_all. Can you tell me what is the file size of iaktos you have ?. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-827500 Share on other sites More sharing options...
DA_SONG_MAN Posted July 21, 2008 Share Posted July 21, 2008 2.64GB and running on an ASUS P5KPL with an Intel Core 2 Duo E6550 and an ATi HD2400XT Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-827608 Share on other sites More sharing options...
zhimama Posted July 21, 2008 Share Posted July 21, 2008 Someone tried this version with no issues on P35C DS3R board ? Currently, i am using Kalyway 10.5.2 , but sometims has little error happening when i worked with heavier applications like 3D and graphic softwares. don't know why, just feel is not as stable as i think..so, wanna try this one... Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-827830 Share on other sites More sharing options...
willnjenn Posted July 22, 2008 Share Posted July 22, 2008 I am now running this on a Bad Axe 2 board, and it is 'so far' the most stable Leopard system I have used. On first install, I got very discouraged. It restarted to the flashing cursor after the install finished. Once I removed the 'space' in the name of my partition, everything worked great. It was named 'Macintosh HD', and I simply made it 'MacintoshHD' to test it. That's all it took for me to get past the blink of shame. I only chose the stock files and then installed the latest nvidia drivers for the hackintosh. This is the fist Leopard build that shows my overclock speed in About This Mac. Thanks for a great build people!!! You definitely have one happy user here! Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-828563 Share on other sites More sharing options...
PsYcHoKiLLa Posted July 22, 2008 Share Posted July 22, 2008 I tried it and got nowhere (Skulltrail system), I think I'll wait for the Kalyway 10.5.4 full install which should hopefully be soon. Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-828622 Share on other sites More sharing options...
kevd_hackin Posted July 22, 2008 Share Posted July 22, 2008 anyone know what bootloader this has on it, darwin, pc efi, or chameleon? Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-828899 Share on other sites More sharing options...
coccolino_dbro Posted July 22, 2008 Share Posted July 22, 2008 It has Darwin (EFI and non-EFI). Link to comment https://www.insanelymac.com/forum/topic/116142-iatkos-1054-dvd-release/page/2/#findComment-828901 Share on other sites More sharing options...
Recommended Posts