DoiX Posted December 30, 2007 Share Posted December 30, 2007 DivisionBell, psst.. check wiki the wiki doesn't say anything about my problem "operating System error" it appears when i try to boot into leopard, i reinstalled leo for 6 darn times Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558497 Share on other sites More sharing options...
GingerTea Posted December 30, 2007 Share Posted December 30, 2007 One question - will the Lan Freeze-thingy go away if I disable the nForce-LAN, and use the Marvell Yukon-chip instead? (MoBo: ASUS A8N-SLI Dlx) It worked perfectly for me. No more freezes with the Marvell Port Use this Driver for the Marvell Chip: http://forum.insanelymac.com/index.php?showtopic=15700 --- my problem: How the heck to I boot into MacOSX? installation went along, but now how do i boot into my new osx? it wont start directly from the hdd, and from the dvd it just seems to boot the installer! thx for any help! That's because Darwin wasn't installed. Use the DVD and then enter the following kernel flag: rd=diskXsX Replace diskXsX with your HDD, on which you installed Leopard. Example: disk0s1, 0 means the first Disk, and 1 the first partition. Then search the forum how to manually install the darwin bootloader. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558533 Share on other sites More sharing options...
Dylan-AKA-Hit Posted December 30, 2007 Share Posted December 30, 2007 Actually i started the torretn month ago, tough i forgot it and turned it on and it finnished in about 4 hours(was on 50% already) But now when i boot with VMware i get(see pic) And VMware says the os crashed and it should reboot(And indeed it doesn't do anything anymore) I used -x -f (Otherwise it gives Kernal Panic) I have succesfully installed Mac OS X Tiger already so MacosX86 does work(Except VideoCard but this because i got the nextgen low budget 8500GT) This is pic of what happens: System: AMD Athlon X2 4000+ 64Bit(But i actually only use it with 32Bit tough,Also it supports SSE3 so that is not the problem,Clock 2.11Ghz Duallcore) Club3D Nvidia Geforce 8500GT 160GB Harddisk 2GB Memory By the way i use VMware, because with Tiger it only worked with VMware(Something with SATA II Harddisk) And didn't want to try and throw away another disk Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558550 Share on other sites More sharing options...
DivisionBell Posted December 30, 2007 Share Posted December 30, 2007 hej, thx for all your help! funny enough my pc hangs up at the same time dylans vmware verion does. ill go and check the wiki, a´right? EDIT: well nothing on wiki. i remember reading something about panic problems in this thread, but how were they resolved? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558556 Share on other sites More sharing options...
Dylan-AKA-Hit Posted December 30, 2007 Share Posted December 30, 2007 hej, thx for all your help! funny enough my pc hangs up at the same time dylans vmware verion does. ill go and check the wiki, a´right? What for system do you have? By the way sometimes normal boot works, but sometimes it does not and crashes But when i use -x -f thing it always works, but at the end it crashes tough Oh and by the way this is that message what i get: Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558559 Share on other sites More sharing options...
sergiales Posted December 30, 2007 Share Posted December 30, 2007 One little question: How could I change the first day of week to Monday instead of Sunday?. I don't find where to set it... Thanks. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558576 Share on other sites More sharing options...
DivisionBell Posted December 30, 2007 Share Posted December 30, 2007 ive got an amd 3400+ sse2 socket 754 asus k8ne deluxe 2gb ram ide hdd ill try -x next EDIT: -x didnt work, what else shall I try? oh and btw i got the darwin 9.0.0 kernel installed, not the 9.1.0 Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558588 Share on other sites More sharing options...
moto211 Posted December 30, 2007 Share Posted December 30, 2007 ive got an amd 3400+ sse2 socket 754 asus k8ne deluxe 2gb ram ide hdd ill try -x next the amd 3400+ socket 754 supports sse3. i don't know about yours, but mine overclocks well too. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558629 Share on other sites More sharing options...
DivisionBell Posted December 30, 2007 Share Posted December 30, 2007 the amd 3400+ socket 754 supports sse3. i don't know about yours, but mine overclocks well too. mine doesnt. at least cpu z doesnt show it! Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558642 Share on other sites More sharing options...
angel___eyes Posted December 30, 2007 Share Posted December 30, 2007 hey bros... mine got installed correctly 2... but the prob is just the running... i havent installedt the tiger ... so how can i create the login........4 myself... since while creating the new login the system hangs... thanx angel Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558656 Share on other sites More sharing options...
Svein_Jarle Posted December 30, 2007 Share Posted December 30, 2007 Thanks alot! Have now disabled nforce lan-chip, installed the Yukon-driver, and removed the cpus=1-flag from the bootfile... Only played with it for a few seconds, but it seems to be stable. Very nice! Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558665 Share on other sites More sharing options...
Shiftedx Posted December 30, 2007 Share Posted December 30, 2007 I can't wait for the release of v2 I can't thank you enough for all your effort and hard work zephyroth Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558680 Share on other sites More sharing options...
L1N64-SLI WS Posted December 30, 2007 Share Posted December 30, 2007 Zephyroth, is there a place I can support the cause? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558702 Share on other sites More sharing options...
Nephelim Posted December 30, 2007 Share Posted December 30, 2007 @Gipo: +1, I think it's a good Idea to cut all the languages besides English, and then release a second CD which includes all the languages and other optional add-ons. I think that's a great idea! But then, as an American, I have a responsibility to speak only English ... Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558755 Share on other sites More sharing options...
GingerTea Posted December 30, 2007 Share Posted December 30, 2007 Thanks alot! Have now disabled nforce lan-chip, installed the Yukon-driver, and removed the cpus=1-flag from the bootfile... Only played with it for a few seconds, but it seems to be stable. Very nice! Sounds good! Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558769 Share on other sites More sharing options...
alfredo456 Posted December 30, 2007 Share Posted December 30, 2007 Hello: The installation was very fine. -the onlyproblem is the duration. For installing, it took more than 1 hour in a hard disk IDE. It is normal?. Once installed, the system run very slow. So, I downloaded the appleviaata.kext and put the ID my SATA Controller. Voila!...My disc SATA was in the desktop. please, the next time...install this file...please....the installation is a eternity: (It is very difficult put this file into the iso with the chipset id for installing directly in a SATA disk?) It runs with -legacy and -v flags localized in the apple.boot file. Whant mean -legacy? My computer: Leopard 10.5.1 ToH with EFI v8. ASUS M2V - Chipset VIA K8T890 (sata chipset VT8237A, vendor id: 0x1106, device id: 0x0591) 3,5 gb RAM Kingston 667Mhz, 80 gb IDE and 160 GB SATA. ATI X300 (CI/QE not supprted) Sound Alc 660 (output only) Mouse and keyboard USB Bye, friends Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558783 Share on other sites More sharing options...
GingerTea Posted December 30, 2007 Share Posted December 30, 2007 The installation was very fine. -the onlyproblem is the duration. For installing, it took more than 1 hour in a hard disk IDE. It is normal?. Depends on the speed of your Drive, I suppose. On my SATA Drive the installation took a little less than 20 minutes. Greetings Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558803 Share on other sites More sharing options...
DoiX Posted December 30, 2007 Share Posted December 30, 2007 my installation took 5 hours beat that Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558889 Share on other sites More sharing options...
sergiales Posted December 30, 2007 Share Posted December 30, 2007 No more than 15 minutes on my Seagate IDE Hdd. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558904 Share on other sites More sharing options...
Raldo Pr Posted December 30, 2007 Share Posted December 30, 2007 Anyway it doesn't work after installation. I haven't erased the two kext yet, but with -x doesn't run. The last word that appear is: "running dsmos" Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558920 Share on other sites More sharing options...
xRAFAx Posted December 30, 2007 Share Posted December 30, 2007 I had the same problem, the instalation took more than 1 hour and the system was very slow... It's because the AMD DVD don't have the AppleVIAATA.kext. I put that kext into Extensions folder and the system is fine now... My question is: Is there a way to put this kext into DVD? Without it the acces to IDE is very poor... My computer: Leopard 10.5.1 ToH ASUS K8V-SE Deluxe 768Mb RAM - nVidia FX5200 (Full Working) AMD Sempron 2800+ (SSE3) Samsung IDE 160Gb Samsung IDE 80Gb Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558924 Share on other sites More sharing options...
Raldo Pr Posted December 31, 2007 Share Posted December 31, 2007 It Works! WORKS! Now I've a problem with keyboard but i think isn't too dangerous... Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558949 Share on other sites More sharing options...
mihelm Posted December 31, 2007 Share Posted December 31, 2007 Rev.2 will be on DVD-SL but ... space is a problem. At the moment I must remove all languages, AsianLanguagesSupport and X11 in order to burn it. But some stuff are missing as there is not enough space to place it on the ISO so the DVD is not good. perhaps this was covered somewhere else... what's the rationale behind making it single layer? why not go dual layer and put everything in it that people might need? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558959 Share on other sites More sharing options...
xRAFAx Posted December 31, 2007 Share Posted December 31, 2007 I have mouse and keyboard PS2. After instalation I couldn't use them. To fix it, boot from DVD open terminal and copy the AppleACPIPlatform.kext and ApplePS2Controller.kext from DVD to Leopard HD Extensions folder. It worked for me... The difference was that I used the old kexts from my Tiger instalation... I think use the DVD kexts work too because during the instalation the mouse and keyboard works... If it din't work, find the tiger kexts and use them... Don't forget to fix permissions before reboot... PS. For those who have the Portuguese Brazilian ABNT2 keyboard the modified ApplePS2Controller.kext to get the \ | / ? keys work too... Sorry for my english... Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-558983 Share on other sites More sharing options...
Raldo Pr Posted December 31, 2007 Share Posted December 31, 2007 Thank you So Much! EDIT: I'm posting from Leopard It works Perfectly. Thank you puttabong, sergiales, xRAFAx and the others! Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/46/#findComment-559004 Share on other sites More sharing options...
Recommended Posts