Denja Posted November 3, 2007 Share Posted November 3, 2007 i am getting this at diagnostic mode: hi mem tramps at oxffe00000PAE Enabled 64 bit mode enabled enabling intel features standard timeslicing quantum is 10000 us vm_Page_bootstraps: 2510194 free pages mig_table_max_displ= 71 Enabling XMM Register save/restore and SSE/SSE2 opcodes ACPI CA 20051117 [debuglevel=0 layer=0] AppleACPICPU: ProcessorApicId=0 Enabled AppleACPICPU: ProcessorApicId=1 Enabled AppleACPICPU: ProcessorApicId=130 Disabled AppleACPICPU: ProcessorApicId=131 Disabled Passed! ... maximum Protection of commpage Set All Copy Right © 1982, 1986, 1989, 1991, 1993 The Rights of University of California All rights Reserved Using 5242 buffer headers and 4096 Cluster IO buffer headers Enabling XMM register save/restore SSE/SSE2 Opcodes Standered CPU 01 IOPIC: Version 0x20 Sectors 0:23 ACPI: System State [sO S3 S4 S5] (S3) Sytem halt at above point and not going further. Any Solution for that...? My specs are: Mobo = intel DG33FB (ON board graphic and sound) Processor Intel® Core2 Duo CPU E6550 @ 2.33GHz, 2331 Mhz, 2 Core(s), 2 Logical Processor(s) HDD WD 200GB Sata (native mode as IDE) File System = Running xp64 and vista64 as ntfs. Link to comment Share on other sites More sharing options...
boinkytwo Posted November 4, 2007 Author Share Posted November 4, 2007 chain0 file should be copied and pasted to the root of drive cthat is you windows xp partition.chain0 file is also available from the install dvd of tiger. Link to comment Share on other sites More sharing options...
JackSteffan Posted November 5, 2007 Share Posted November 5, 2007 would this work with mac.nubs dvd? for some reason when i insert it, and go to disk utilities, i cannot see my harddrive on the list, only my DVD drive. what cvould i have done wrong? its partitioned, the first with xp, the second none formatted, no letter, primary, 8gbs and the third is unallocated space. thanks Link to comment Share on other sites More sharing options...
JackSteffan Posted November 6, 2007 Share Posted November 6, 2007 my computer is an 8510p btw runnin xp Link to comment Share on other sites More sharing options...
codylc Posted November 7, 2007 Share Posted November 7, 2007 Just reposting this: http://rapidshare.com/files/35189254/boinkytwo_bootpm.iso Thanks Visionary & Boinkytwo!! Link to comment Share on other sites More sharing options...
thefinalprophecy Posted November 9, 2007 Share Posted November 9, 2007 I have Xp already installed on Disk0 Partition1, and OS 10.5 installed on Disk1 Partition1 (2 seperate drives). Is there anyway I could just add some lines to Windows' boot.ini file in order to have an option that points ot Disk1 instead of 0? Right now I just use my motherboard's F8 Boot Menu but I'd rather have my Mac partition available in the Windows Bootloader. Soobasically my question is, how I can I do this without having to wipe either my Xp or OS 10.5 installations? Edit: Nevermind I just did the Chain0 trick Link to comment Share on other sites More sharing options...
cornolio Posted February 17, 2008 Share Posted February 17, 2008 hi, i've got tha same problem as aaron. i used the chain0 method, but when the xp boot loader appers, and when i choose osx i returning back to the same place --- xp boot loader. if i want to boot with osx i need to manually chenge my disk - 2 partition with osx. please help. my xp partition is primary and active, osx is primary. Link to comment Share on other sites More sharing options...
Evilhax0r Posted February 18, 2008 Share Posted February 18, 2008 Does this method still work for 10.5.2?Does this method still work for 10.5.2? Link to comment Share on other sites More sharing options...
Split Posted February 28, 2008 Share Posted February 28, 2008 Ive tried both kalyway and iAtkos and both dont reconize any of my HHD's or partitions any help or suggestions? Link to comment Share on other sites More sharing options...
boinkytwo Posted March 1, 2008 Author Share Posted March 1, 2008 hi,i've got tha same problem as aaron. i used the chain0 method, but when the xp boot loader appers, and when i choose osx i returning back to the same place --- xp boot loader. if i want to boot with osx i need to manually chenge my disk - 2 partition with osx. please help. my xp partition is primary and active, osx is primary. make sure you the following setups: 1. put chain0 in c: drive 2. edit boot.ini and insert c:\chain0="OSX" It should look like this: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Media Center Edition" c:\chain0="OSX" *** you may substitute osx any name of your choice. 3. Reboot and try. IF STILL IT DOES NOT WORK, TRY READING THIS AGAIN Link to comment Share on other sites More sharing options...
nyukeit Posted March 4, 2008 Share Posted March 4, 2008 I have leopard ToH RC2 I have tried many scripts and stuff posted here but my laptop just wont boot without the DVD. my laptop is HP DV2119TX. I tried ur method of Darwin Boot Loader, by replacing tht boot.plist file...no success. Also, i cant boot in windows xp now. guidance? i just want to fix this boot thing....thts the only thing remaining now....plz help email id for boot cd: nyukeit@gmail.com Link to comment Share on other sites More sharing options...
polluxx2008 Posted March 4, 2008 Share Posted March 4, 2008 boot-cd? my email: polluxx@gmx.de thanks Link to comment Share on other sites More sharing options...
oci Posted March 17, 2008 Share Posted March 17, 2008 may i have boot cd ?! my email : risa_dana@yahoo.com thanks anyway Link to comment Share on other sites More sharing options...
katakbersalin Posted March 22, 2008 Share Posted March 22, 2008 gimme the boot cd ... my e-mail : katak.bersalin@gmail.com Link to comment Share on other sites More sharing options...
winglik Posted March 22, 2008 Share Posted March 22, 2008 boot cd please email: winglik@gmail.com Link to comment Share on other sites More sharing options...
tekniques Posted March 22, 2008 Share Posted March 22, 2008 Hey can I have the bootcd? email: paddlefoot123456@yahoo.ca Thanks in advance. *EDIT* * the link is posted on the previous page* Here it is:: http://rapidshare.com/files/35189254/boinkytwo_bootpm.iso Link to comment Share on other sites More sharing options...
Yameen Posted March 23, 2008 Share Posted March 23, 2008 Hello Boinkytwo. Thankyou to post such a wonderful guide. My email id is yamron9@gmail.com. Please send me your My boot cd. Thankyou. Pls reply ASAP. Link to comment Share on other sites More sharing options...
twisted vegan Posted March 24, 2008 Share Posted March 24, 2008 sorry I'm a bit of a newbie at this, I already have kalyway and tinyxp on seperate hard drives, if I want to switch from one to the other I have to change the hard drive priorities in the bios. Is there anyway I can edit the darwin bootloader or the windows boot.ini file so I don't have to go into the bios every time I want to switch. Any help please ? Link to comment Share on other sites More sharing options...
Sambaran Posted March 25, 2008 Share Posted March 25, 2008 Boot cd: sambaran.mail@gmail.com Link to comment Share on other sites More sharing options...
iscream Posted March 27, 2008 Share Posted March 27, 2008 Hi, thanks for the guide. Can I have the bootcd? Thanks! xuxianbin@hotmail.com Link to comment Share on other sites More sharing options...
mahinder Posted March 27, 2008 Share Posted March 27, 2008 Hi Have a Compaq Evo N610c laptop with 1gig mem and 250GIG hd. First i have instaled WinXP and then MAC-OSX. I followed the precedure and hang at step 8: "Paste this file: com.apple.Boot.plist" what do you meen with this i haven't copy anything so what do i need to paste? This step i have pased and followed the next so change : copy and paste this in your terminal window right after root# chown -R root:wheel /Library/Preferences/SystemConfiguration/com.apple.Boot.plist chmod -R 755 /Library/Preferences/SystemConfiguration/com.apple.Boot.plist But after restar i don't see any timer and when the slash signed turns i hit the enter key and then nothing happends. Can you please advice what to do ? Link to comment Share on other sites More sharing options...
yevgeniyvl Posted April 3, 2008 Share Posted April 3, 2008 Send bootCD please. My e-mail is yevgeniyvl@gmail.com Thank You! Link to comment Share on other sites More sharing options...
mtrog007 Posted April 3, 2008 Share Posted April 3, 2008 Please email: mtrog007@yahoo.com (For your disc) Great guide! Link to comment Share on other sites More sharing options...
pioneer1976 Posted April 5, 2008 Share Posted April 5, 2008 Can i get the boot cd please pioneer1976@gmail.com . Thanks Link to comment Share on other sites More sharing options...
boinkytwo Posted April 18, 2008 Author Share Posted April 18, 2008 bootcd[/ur boinkytwo_bootpm also available from the bays of pirate Link to comment Share on other sites More sharing options...
Recommended Posts