neo_cor Posted May 31, 2009 Share Posted May 31, 2009 Hi everybody after long time. For DevID 71c1: ATi_X1650_Pro__Leopard_10.5.5_.zip ATi_X1650_Pro__Leopard_10.5.6_.zip http://rapidshare.com/files/235995052/ATi_...ard_10.5.7_.zip For other ID's follow: ATI_Radeon_X1650Pro_how_to.txt Thanks popeyeq for these latest kexts. I used them and finally o was able to get into the MacOS and with ability to change the resolution. However there is another issue that crept up. Now my DVI display does not work. I installed the Retail Leopard using Boot-132 hack and was not getting the option to change the resolution. My motherboard is Asus P5W-DH Deluxe and video is Diamond X1650 512 (0x71C7). I have a 24" monitor to which I have connected through DVI and the VGA (using DVI-VGA) connected to a 46" sony HDTV. After i used the updated kexts for x6150 (0x71C7), on reboot the DVI display goes blank (no display) and only the VGA on the TV is displayed. The good thing is now i can change the resolution, so i picked the 1920x1080 on my VGA (TV). The resolution was changed but the whole image seemed to have been shifted to the right side, i still had some 20% of blank screen on the left side. Then i switched over to VGA on my 24" monitor and tried the 1920x1200 (max res) and the screen went kapoot, no display, nothing, nada, neyet, nope, nako... And now i cant do anything. Even on reboot the screen goes blank after the grey apple logo. Is there a safe mode by which i could change the reolution back like in windows? Or do i have to restore my earlier TimeMachine backup? Also i read somewhere about how to enable the DVI thing, can remember where, bu i guess you know it for sure. Thanks Neo Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1166812 Share on other sites More sharing options...
Zev23 Posted June 4, 2009 Share Posted June 4, 2009 Hi everybody after long time. For DevID 71c1: ATi_X1650_Pro__Leopard_10.5.5_.zip ATi_X1650_Pro__Leopard_10.5.6_.zip http://rapidshare.com/files/235995052/ATi_...ard_10.5.7_.zip For other ID's follow: ATI_Radeon_X1650Pro_how_to.txt Hi popeyeq, I would like to say that the driver is working for 10.5.6. Just installed it yesterday. A DVI-VGA connector and VGA cable to connect to your monitor MUST be used in order to run. Although I know it's not quite possible, but will you be able to provide a version which is compatible to DVI output? Cheers Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1169518 Share on other sites More sharing options...
Zev23 Posted June 6, 2009 Share Posted June 6, 2009 Is it works on non-pro card..??I have Gigabyte X1650 DDR2 256mb thx Hi kathmandude, Do you have the same mode as mine? GV-RX165256D-RH Mine is working and I've upload a pic of my display card info just few threads before. But I have to connect to the VGA port of my monitor to use. I'm using leopard 10.5.6 now Cheers Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1170753 Share on other sites More sharing options...
kathmandude Posted June 6, 2009 Share Posted June 6, 2009 Hi kathmandude, Do you have the same mode as mine? GV-RX165256D-RH Mine is working and I've upload a pic of my display card info just few threads before. But I have to connect to the VGA port of my monitor to use. I'm using leopard 10.5.6 now Cheers Hi Zev23, I'm not sure which one, the Dev ID is 71c7. I've tried many kext specially built for the Dev ID but the result was blank black screen. So which kext do you use..?? Thanks before Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1170878 Share on other sites More sharing options...
Zev23 Posted June 9, 2009 Share Posted June 9, 2009 Hi Zev23, I'm not sure which one, the Dev ID is 71c7. I've tried many kext specially built for the Dev ID but the result was blank black screen. So which kext do you use..?? Thanks before Have you try to connect using the old VGA cable (the head should be blue color one). I have updated my OSX to 10.5.7, as a result I need to use the 10.5.7 version here. I used to get black screen too after I installed the driver BUT that time I was using DVI cable. After I changed to VGA cable, I can see the desktop. Hope this help Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1173257 Share on other sites More sharing options...
kathmandude Posted June 10, 2009 Share Posted June 10, 2009 Have you try to connect using the old VGA cable (the head should be blue color one). I have updated my OSX to 10.5.7, as a result I need to use the 10.5.7 version here. I used to get black screen too after I installed the driver BUT that time I was using DVI cable. After I changed to VGA cable, I can see the desktop. Hope this help I'm still using VGA cable, my monitor is CRT Thanks for the link, I'll try it this weekend. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1173725 Share on other sites More sharing options...
xorti Posted June 14, 2009 Share Posted June 14, 2009 Hi everybody after long time. For DevID 71c1: ATi_X1650_Pro__Leopard_10.5.5_.zip ATi_X1650_Pro__Leopard_10.5.6_.zip http://rapidshare.com/files/235995052/ATi_...ard_10.5.7_.zip For other ID's follow: ATI_Radeon_X1650Pro_how_to.txt Have you manage to wake up after sleep???? Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1177837 Share on other sites More sharing options...
chico_stang Posted August 29, 2009 Share Posted August 29, 2009 Just wanted to let you guys know that this card (X1650 Pro) is not fully supported in SL (in case you've been wondering). All I can get is resolution change. No QE/CI/Open GL. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1241036 Share on other sites More sharing options...
Colask8 Posted September 22, 2009 Share Posted September 22, 2009 So that means that we need to change our Graphic Card? I was trying to edit all in ATIRadeonX100.kext, i hex edited it, changed dev id, everytime no kext loading... And last thing i know i broke AppleIntelCPUPowerManagment.kext, and now i cant boot to SL. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1276849 Share on other sites More sharing options...
chico_stang Posted September 22, 2009 Share Posted September 22, 2009 So that means that we need to change our Graphic Card? I was trying to edit all in ATIRadeonX100.kext, i hex edited it, changed dev id, everytime no kext loading... And last thing i know i broke AppleIntelCPUPowerManagment.kext, and now i cant boot to SL. Yes, either that or stay in Leopard. I tried everything I know, but no luck so. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1277034 Share on other sites More sharing options...
Edu's Mac Posted September 27, 2009 Share Posted September 27, 2009 Hi everyone I've got a Sapphire Radeon x1650 (RV535) with DevID 71c7 and secondary DevID 71e7. Got QE/CI work, but dual is not working. Any clue? Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1281894 Share on other sites More sharing options...
chico_stang Posted September 27, 2009 Share Posted September 27, 2009 Hi everyone I've got a Sapphire Radeon x1650 (RV535) with DevID 71c7 and secondary DevID 71e7. Got QE/CI work, but dual is not working. Any clue? Did you get it to work in Leo or Snow Leo? Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282122 Share on other sites More sharing options...
Edu's Mac Posted September 27, 2009 Share Posted September 27, 2009 Did you get it to work in Leo or Snow Leo? Leopard 10.5.8, iPC 10.5.6 upgraded with iDeneb Combo Update Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282125 Share on other sites More sharing options...
chico_stang Posted September 27, 2009 Share Posted September 27, 2009 Leopard 10.5.8, iPC 10.5.6 upgraded with iDeneb Combo Update Oh ok. Anyway, I ask because I have yet to get our card to work in Snow Leo. So far, no one has posted a working driver. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282385 Share on other sites More sharing options...
Colask8 Posted September 28, 2009 Share Posted September 28, 2009 chico have you tried in 10.6.1? Tell, ill try if u havent. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282643 Share on other sites More sharing options...
chico_stang Posted September 28, 2009 Share Posted September 28, 2009 chico have you tried in 10.6.1? Tell, ill try if u havent. Tried, but not extensively. I gave up. Still on Leo until there is a working driver. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282653 Share on other sites More sharing options...
Edu's Mac Posted September 28, 2009 Share Posted September 28, 2009 Oh ok. Anyway, I ask because I have yet to get our card to work in Snow Leo. So far, no one has posted a working driver. OK, I can send mine, but... I don't know which files I should send. Mine supports QE/CI, Rotation, Resolution. What should I do? Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282712 Share on other sites More sharing options...
chico_stang Posted September 28, 2009 Share Posted September 28, 2009 OK, I can send mine, but... I don't know which files I should send. Mine supports QE/CI, Rotation, Resolution. What should I do? Yes, but your card is supported in Leopard, not Snow Leopard, am I correct? The card works perfectly in Leopard, but in Snow Leopard it does not. So I need SL drivers actually. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282713 Share on other sites More sharing options...
Edu's Mac Posted September 28, 2009 Share Posted September 28, 2009 Yes, but your card is supported in Leopard, not Snow Leopard, am I correct? The card works perfectly in Leopard, but in Snow Leopard it does not. So I need SL drivers actually. In Leopard it works perfectly? I didn't manage to get dual monitor features. It only replicates the same content in both monitors. You managed to do it? What should I do? Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282869 Share on other sites More sharing options...
chico_stang Posted September 28, 2009 Share Posted September 28, 2009 In Leopard it works perfectly? I didn't manage to get dual monitor features. It only replicates the same content in both monitors. You managed to do it? What should I do? I don't have dual monitors so I can't say if it works or not. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1282990 Share on other sites More sharing options...
DJ24966 Posted October 14, 2009 Share Posted October 14, 2009 Device id: 71c7 Using 10.5.7 and just get a blue screen after the apple logo using these drivers. Any ideas? Thanks Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1298615 Share on other sites More sharing options...
chico_stang Posted October 15, 2009 Share Posted October 15, 2009 Device id: 71c7 Using 10.5.7 and just get a blue screen after the apple logo using these drivers. Any ideas? Thanks Update to 10.5.8 and I can send you my files. Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1299228 Share on other sites More sharing options...
the.loler Posted October 29, 2009 Share Posted October 29, 2009 so sorry for my english. I read all topic, but i'm so noob. First install AGPgart or MacLovin and if i install the AGPgart, i musst install IOPCIfamily?and i have sapphire x1650pro 512 AGP (71c7) Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1314415 Share on other sites More sharing options...
DJ24966 Posted January 27, 2010 Share Posted January 27, 2010 Anybody have working kexts with Quartz enabled for 71c7? 10.5.7 Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1397592 Share on other sites More sharing options...
bhamra Posted January 28, 2010 Share Posted January 28, 2010 iatkos 10.5.7 ATI x1650 0x71c7 Driver 100% working Download Kext http://uploading.com/files/95385a44/IATKOS...7%2BDRIVER.zip/ Link to comment https://www.insanelymac.com/forum/topic/52826-0x71c1-0x71c7-ati-x1650-pro-fix-qecirotation-enabled/page/14/#findComment-1397994 Share on other sites More sharing options...
Recommended Posts