Jump to content

[Release] macOS Sequoia 15.3

Anto65

By Anto65,
in New Releases and Updates

 Share
86 posts in this topic

Recommended Posts

mnfesq
mnfesq
Posted
Posted (edited)
5 hours ago, deeveedee said:

@mnfesq Congrats on the new hack!  Is that a 12th gen Intel?  If so, did you use this?

 

As @ANTIKO posted, this version of Chrome Box has the 8th Gen Intel i7 processor, which happens to be the same processor/chipset as my HP laptop. That's what inspired me to attempt it.  It was also helpful that I bought a refurbished Chrome Box for $150 on Amazon.  It actually came with a 128 GB SSD, which I promptly replaced with a 1 TB NVMe drive.  I also happened to have an M.2 pci-e Broadcom 4360 wifi/BT chip in my stash of extra computer parts so I replaced the Intel wifi/BT chip with the Broadcom chip and used OCLP to restore wifi functionality. (Yes, I am aware of your opinion about OCLP). I was not able to get AppleALC to work and am using VoodooHDA with good results.  I will likely continue to try to get AppleALC to work but not because I need it, only because it is another challenge to face on a rainy day.

 

BTW, I'm encountering problems with my laptop and I believe they are hardware based (I've replaced the motherboard and just about every other part in it except the display.) So I will likely venture into a newer generation of Intel processor soon.  It's good to know that IGPU can be restored because, at least with my current laptop, I was never able to get the DGPU to work.

 

Lastly, because it is not really on-topic, the biggest challenge for me was removing the Chrome firmware and installing a fully-functioning UEFI firmware. There is a whole community of folks that specialize in that task and I am grateful to them for the firmware/tutorials.

Edited by mnfesq
  • Like 8
D-an-W
D-an-W
Posted
Posted (edited)

Hi folks,

 

My update to 15.3.1 went smoothly...BUT...I can no longer boot into Ventura, now I don't think (Pretty certain) the update had anything to do with it but much more likely something I was tinkering with and not tested Ventura since which would be kext and OC updates and re-ordering of kexts.

 

I know this isn't the correct place to ask which I apologise for but you folks are on the cutting edge of updates etc and was hoping you might be able to point me in the right direction to solve this and get me triple booting again (Windows 11 still works fine).

  

panic(cpu 0 caller 0xffffff80020f3c99):  initproc exited -- exit reason namespace 7 subcode 0x1 description: could not set up inheritance port

uuid info:
 0x10a33d000	uuid = <1c6f9ada-39e0-3774-9ea6-80f0656f8b81>
 0x11a0a3000	uuid = <35147f34-023b-37a6-80df-5753d952a289>

Thread 0 crashed

RAX: 0x0000000002000209, RBX: 0x0000000000000000, RCX: 0x00007ff7b5bc28c8, RDX: 0x0000000000000000
RSP: 0x00007ff7b5bc28c8, RBP: 0x00007ff7b5bc2910, RSI: 0x0000000000000001, RDI: 0x0000000000000007
R8:  0x0000600001740700, R9:  0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000246
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000000001, R15: 0x0000000000000007
RFL: 0x0000000000000246, RIP: 0x00007ff8157a79e2, CS:  0x0000000000000007, SS:  0x0000000000000023

Thread 0: 0xffffff9ab3cb1b40
	0x00007ff8157a79e2
	0x00007ff8157c57d0
	0x000000010a37ccaa
	0x000000010a3535aa
	0x000000011a0a9418

Thread 1: 0xffffff9ab3cc85a0
	0x000000011a0a6056
	0x000000011a0f2be2
	0x000000011a0cc8a7
	0x000000011a0ac59b
	0x000000011a0ac419
	0x000000011a0ac00d
	0x000000011a0eff5d
	0x000000011a0abedc
	0x000000011a0ac731
	0x00007ff8157dc1d3
	0x00007ff8157d7bd3

Thread 2: 0xffffff9ab3d7cb40
	0x00007ff8157a02fa
	0x00007ff81563b033
	0x00007ff815641200
	0x00007ff815641d39
	0x00007ff81564c3fc
	0x00007ff8157d8c55
	0x00007ff8157d7bbf


Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 24.3.0: Thu Jan  2 20:22:00 PST 2025; root:xnu-11215.81.4~3/RELEASE_X86_64
Kernel UUID: 0FA106B0-CE42-3EF5-98D6-610845FB1DE7
roots installed: 0
System model name: MacPro7,1 (Mac-***************)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

 

Edited by D-an-W
  • Like 1
XanthraX
XanthraX
Posted
Posted
20 hours ago, chris1111 said:

@miliuco and all other interested

DropEFI integrate Mount/Unmout EFI without password

Hi @chris1111. Thank you for the app. I deleted the previous version using AppCleaner, but the new version asks me for password both at mounting and unmounting. Can you tell me what hidden files to delete?

meg2014
meg2014
Posted
Posted
20 hours ago, D-an-W said:

Hi folks,

 

My update to 15.3.1 went smoothly...BUT...I can no longer boot into Ventura, now I don't think (Pretty certain) the update had anything to do with it but much more likely something I was tinkering with and not tested Ventura since which would be kext and OC updates and re-ordering of kexts.

 

I know this isn't the correct place to ask which I apologise for but you folks are on the cutting edge of updates etc and was hoping you might be able to point me in the right direction to solve this and get me triple booting again (Windows 11 still works fine).

  

panic(cpu 0 caller 0xffffff80020f3c99):  initproc exited -- exit reason namespace 7 subcode 0x1 description: could not set up inheritance port

uuid info:
 0x10a33d000	uuid = <1c6f9ada-39e0-3774-9ea6-80f0656f8b81>
 0x11a0a3000	uuid = <35147f34-023b-37a6-80df-5753d952a289>

Thread 0 crashed

RAX: 0x0000000002000209, RBX: 0x0000000000000000, RCX: 0x00007ff7b5bc28c8, RDX: 0x0000000000000000
RSP: 0x00007ff7b5bc28c8, RBP: 0x00007ff7b5bc2910, RSI: 0x0000000000000001, RDI: 0x0000000000000007
R8:  0x0000600001740700, R9:  0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000246
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000000001, R15: 0x0000000000000007
RFL: 0x0000000000000246, RIP: 0x00007ff8157a79e2, CS:  0x0000000000000007, SS:  0x0000000000000023

Thread 0: 0xffffff9ab3cb1b40
	0x00007ff8157a79e2
	0x00007ff8157c57d0
	0x000000010a37ccaa
	0x000000010a3535aa
	0x000000011a0a9418

Thread 1: 0xffffff9ab3cc85a0
	0x000000011a0a6056
	0x000000011a0f2be2
	0x000000011a0cc8a7
	0x000000011a0ac59b
	0x000000011a0ac419
	0x000000011a0ac00d
	0x000000011a0eff5d
	0x000000011a0abedc
	0x000000011a0ac731
	0x00007ff8157dc1d3
	0x00007ff8157d7bd3

Thread 2: 0xffffff9ab3d7cb40
	0x00007ff8157a02fa
	0x00007ff81563b033
	0x00007ff815641200
	0x00007ff815641d39
	0x00007ff81564c3fc
	0x00007ff8157d8c55
	0x00007ff8157d7bbf


Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 24.3.0: Thu Jan  2 20:22:00 PST 2025; root:xnu-11215.81.4~3/RELEASE_X86_64
Kernel UUID: 0FA106B0-CE42-3EF5-98D6-610845FB1DE7
roots installed: 0
System model name: MacPro7,1 (Mac-***************)
System shutdown begun: NO
Panic diags file unavailable, panic occurred prior to initialization

 

I know you from the "other" site, and I think it might be best to just open a new thread and see if you get response there. 

 

However, I am not surprised you are getting a CPUPanic with Ventura though.  I have had plenty of them.  I am running Ventura's latest release 13.7.4 (testing mode) and it seems a bit better.  I would first login to Sequoia and open the EFI for Ventura (different EFIs?  Or just one to load everything?) just to check it in case something mangled it.  Seems more likely that something in your BIOS may have changed?  One thing I did was disable the Eff cores and that seems to have helped.  I also had trouble with the built-in Intel 226 adapter so I left it enabled in the BIOS, but did not connect any cable to it, and decided to use this in place of it:  https://www.newegg.com/wavlink-uhp505-usb/p/0J2-008P-000B2?Item=9SIA6PFKD05613

 

I am not at the highest technical level here so posting a separate thread might attract higher level technical folks. 

  • Like 2
  • Thanks 1
chris1111
chris1111
Posted
Posted (edited)
18 hours ago, XanthraX said:

Hi @chris1111. Thank you for the app. I deleted the previous version using AppCleaner, but the new version asks me for password both at mounting and unmounting. Can you tell me what hidden files to delete?

You need to compile the source by using the command

Of course Xcode is required

  

git clone https://github.com/chris1111/Drop-EFI.git && cd $HOME/Drop-EFI && ./BuildChoice.sh

 

Edited by chris1111
  • Like 3
XanthraX
XanthraX
Posted
Posted
10 hours ago, chris1111 said:

You need to compile the source by using the command

Of course Xcode is required

  

git clone https://github.com/chris1111/Drop-EFI.git && cd $HOME/Drop-EFI && ./BuildChoice.sh

 

Thank you. It works. 

  • Like 1
  • 2 weeks later...
  • 2 weeks later...
Matgen84
Matgen84
Posted
Posted
20 hours ago, fabiosun said:

macOS 15.3.2 (24D81) ;)

 

Thanks. I don't understand why Apple  publish two versions ?

  

  #######################################################
 #                      gibMacOS                       #
#######################################################

Available Products:
 
 1. macOS Sequoia 15.3.2 (24D2082)
   - 082-04099 - Added 2025-03-11 17:55:38 - 13.05 GB
 2. macOS Sequoia 15.3.2 (24D81)
   - 082-01336 - Added 2025-03-11 17:52:42 - 15.25 GB

 

  • Like 2
Anto65
Anto65
Posted
  • Author
Posted (edited)

The First Is for M4 MacBook Air & M3 & M4 Mac Studio only 😉

 

 

macOS 15.3.2 (24D81)

 

Full Installer 

https://swcdn.apple.com/content/downloads/62/63/082-01336-A_QFPSTWIJMM/yjbdoqrcvwy4hwiwxiu1aiwouljw5o2ayx/InstallAssistant.pkg

Edited by Anto65
  • Like 4
 Share
Go to topic listing
×
×
  • Create New...