macOS Sonoma Wireless Issues Discussion.

[cankiulascmnfye]

Aaaaaand it's gone from the Assets again. Weird.

[Cyberdevs]

@cankiulascmnfye

It's back again

[surenmunoo]

5 hours ago, SavageAUS said:

There have been plenty of ways posted to get the full installer for each beta, no reason to be stuck on beta 1. For the wifi patching to be successful you will need to update to the latest beta and follow the instructions.


Sent from my iPhone using Tapatalk
To fix the black screen delay take a look at whatever green, in particular the boot args attached.
For wifi follow the instructions carefully and as long as you have a supported chip it will work. Just takes some tinkering and patience.
Make sure you set the min and max kernel for the OCLP Kexts to be able to boot Ventura still.
Make sure you set the nvram correctly amfi and secure boot and exclude the skywalk kext from macOS.
As previously mentioned the OCLP patcher patches your macOS installation, not your EFI folder. So if your using multiple EFI’s make sure the one you use for Sonoma has the correct settings and Kexts. Don’t forget to clean NVRAM.

For my laptops I need to use -igfxblr and -igfxblt I believe and this corrected the black screen delay.

Sent from my iPhone using Tapatalk

For my Z790 it seems that exclusion under kernel-block is causing my long boot delays and it seems to be blocking both my network ports, the I226-V and Aquantia port and my HS14 usb, SSP1 and 2 Thunderbolts to not show when I enable that. Is there any way to get wireless to work without that exclusion 

[cankiulascmnfye]

5 minutes ago, Cyberdevs said:

@cankiulascmnfye

It's back again

 

Yay. I am getting an 27" iMac 11,3 tomorrow which I bought for dirt cheap. Then I can finally test it on a real Mac I already bought the i7 870 Upgrade for it for 10 bucks (2 CPUs actually, shipping iincluded). But I think Sonoma is out of the picture at the moment. I think I need a GPU upgrade which requires flashing a modded vbios and a different GPU cooler or whatever.  I save that for another day.

[surenmunoo]

6 hours ago, Max.1974 said:

 

 

I saw your config plist, and maybe you should try exclude UsbinjectAll.kext because you already have Usbports.kext and mapping (I guess) so, this cause conflicts.

 

In your MOBO are you have only one Fenvi Card combo, or have another (onboard like intel) original from your MOBO model? 

 

I was have issues with Z790 usb ports, nothing fixes until make my on SSDT Mapping ports like OC Little Translate USB Mapping from Git Hub user

 

 

 

 

Can you share your Z790 EFI that works with wifi BCM4360 or Fenvi so that I can compare. My issue is that exclusion in kernel-block that is causing issues for me. I have closed all my problems down to just that. If I remove that system works. 

[cankiulascmnfye]

5 hours ago, SavageAUS said:

For my laptops I need to use -igfxblr and -igfxblt I believe and this corrected the black screen delay.

 

AFAIK, you should use either or, not both. -igfxblr is for ≤ Monterey and -igfxblt is for Ventura and newer. I know because my laptop requires a backlight fix as well.

[Cyberdevs]

5 minutes ago, cankiulascmnfye said:

Yay. I am getting an 27" iMac 11,3 tomorrow which I bought for dirt cheap. Then I can finally test it on a real Mac I already bought the i7 870 Upgrade for it for 10 bucks (2 CPUs actually, shipping iincluded). But I think Sonoma is out of the picture at the moment. I think I need a GPU upgrade which requires flashing a modded vbios and a different GPU cooler or whatever.  I save that for another day.

Oh, cool, but that's a really old Mac but it's gonna be fun nonetheless lol

[cankiulascmnfye]

On 7/26/2023 at 9:03 PM, Cyberdevs said:

Oh, cool, but that's a really old Mac but it's gonna be fun nonetheless lol

 

I look at it more like a decorative piece of tech for my living room to browse the web or do some writing or office stuff.

Edited August 12, 2023 by cankiulascmnfye

[CloverLeaf]

39 minutes ago, cankiulascmnfye said:

 

AFAIK, you should use either or, not both. -igfxblr is for ≤ Monterey and -igfxblt is for Ventura and newer. I know because my laptop requires a backlight fix as well.

 

I tried all combinations, no problem using both. Question is - is it needed? Answer is - No. One will work for sure. 

BTW my Dell 7400 also have this problem in Ventura and I'm using -igfxblr because -igfxblt stopped working at some point. Weird.

Edited July 26, 2023 by CloverLeaf

[Max.1974]

1 hour ago, surenmunoo said:

Can you share your Z790 EFI that works with wifi BCM4360 or Fenvi so that I can compare. My issue is that exclusion in kernel-block that is causing issues for me. I have closed all my problems down to just that. If I remove that system works. 

 

 

 

 

 

Here two EFI different. Not created by OCLP.

 

NOT FOR OCLP

 

Its better you read the post

 

 

 

 

Here is ONE EFI. Not created by OCLP that is for Machintoshes computers. 

 

Use your onwn EFI modified like mine to put kexts and after that, give a Reset NVRam and run EFI on boot. 

 

Then run OCLP to Start Rooting your macOS SONOMA, reboot with EFI modified like mine, and should works. 

 

Don't forget edit config.plist with SecureBootModel like mine from EFI below.  

 

 

I try and works compiled my Opencore Legacy Patcher, and use with OCLP 0.6.8 works for SONOMA BETA 3 and 4

 

Its very IMPORTANT FOR YOU REMAP YOUR USB PORTS AND TRY USE YOUR OWN SSDTS

 

 

FOLLOW THIS TUTORIAL

 

credits is for @ichelash 

 

WORKS 100% TO INSTALL OCLP 0.6.8 COMPILED BY MY SELF

 

563610857_EFISONOMAOCLPAIRDROP240720232.zip

 

Here is an special SSDT compiled to not conflict with USBPORTS

 

ITS ONLY FOR GIGABYTE AORUS Z790 ELITE AX rev.1

 

SSDT-USB-AORUS ELITE AX USBPORTS COMPILED.aml.zip

 

I follow this tutorial for min SSDT

 

https://github.com/5T33Z0/OC-Little-Translated/tree/main/03_USB_Fixes/ACPI_Mapping_USB_Ports

 

Thanks All 

 

 

Edited July 26, 2023 by Max.1974

[Cyberdevs]

@cankiulascmnfye

OCLP 0.6.8 doesn't support Sonoma yet.

"This release currently only supports macOS Big Sur through Ventura. macOS Sonoma support is still in development and will release later this year."

[cankiulascmnfye]

@Cyberdevs Looks like they changed the versioning: 0.6.9 is now the nightly build which supports Sonoma.

Edited July 26, 2023 by cankiulascmnfye

[DMhackintosh]

10 hours ago, SavageAUS said:

There have been plenty of ways posted to get the full installer for each beta, no reason to be stuck on beta 1. For the wifi patching to be successful you will need to update to the latest beta and follow the instructions.


Sent from my iPhone using Tapatalk
To fix the black screen delay take a look at whatever green, in particular the boot args attached.
For wifi follow the instructions carefully and as long as you have a supported chip it will work. Just takes some tinkering and patience.
Make sure you set the min and max kernel for the OCLP Kexts to be able to boot Ventura still.
Make sure you set the nvram correctly amfi and secure boot and exclude the skywalk kext from macOS.
As previously mentioned the OCLP patcher patches your macOS installation, not your EFI folder. So if your using multiple EFI’s make sure the one you use for Sonoma has the correct settings and Kexts. Don’t forget to clean NVRAM.

For my laptops I need to use -igfxblr and -igfxblt I believe and this corrected the black screen delay.

Sent from my iPhone using Tapatalk

 

9 hours ago, miliuco said:

@DMhackintosh

Set IOSkywalkFamily before IO80211FamilyLegacy in config.plist order. 
Did you set all as per OCLP readme?

https://github.com/dortania/OpenCore-Legacy-Patcher/pull/1077#issuecomment-1646934494

 

I'll try it again soon. and will report the result again thank you very much

[BALDY_MAN]

How I got WIFI working in 14.0 Beta (23A5301g)

Added kext to kext folder ran EFI With  ProperTree. Added Block augment to config.plist. run post install run patch with OpenCore Legacy patcher v0.6.9

then reboot

 

added Cofig.plist screen shot

 

Edited July 27, 2023 by BALDY_MAN

[surenmunoo]

13 minutes ago, BALDY_MAN said:

How I got WIFI working in 14.0 Beta (23A5301g)

Added kext to kext folder ran EFI With  ProperTree. Added Block augment to config.plist. run post install run patch with OpenCore Legacy patcher v0.6.9

then reboot

 

added Cofig.plist screen shot

 

So you only using the 2 kexts

[BALDY_MAN]

3 minutes ago, surenmunoo said:

So you only using the 2 kexts

yes.. screen shot of my kext folder

Edited July 27, 2023 by BALDY_MAN

[surenmunoo]

5 minutes ago, BALDY_MAN said:

yes.. screen shot of my kext folder

So you have your IOSkywalkFamily.kext as the first kext according to your Proper Tree

[BALDY_MAN]

7 minutes ago, surenmunoo said:

So you have your IOSkywalkFamily.kext as the first kext according to your Proper Tree

just took from my live EFI Folder yes  first in the config.plist

Edited July 27, 2023 by BALDY_MAN

[surenmunoo]

4 minutes ago, BALDY_MAN said:

just took from my live EFI Folder yes  first in the config.plist

Thanks. I see that @Max.1974 EFI also has that kext first in Kernal so maybe my kext order was wrong 

[BALDY_MAN]

3 minutes ago, surenmunoo said:

Thanks. I see that @Max.1974 EFI also has that kext first in Kernal so maybe my kext order was wrong 

I don't know I checked my config.plist. as I thought was right. and ran the OCP v-0.6.9. rebooted did a vram clear. rebooted I got wifi

[DMhackintosh]

I have updated to 14.0 Beta (23A5301g).

and have done all the steps all over again and this time 

I attached the kexts required and new order they need to be in the config.plist

and finally successful, airdrop works again on Fenvi T919

 

Thank you miliuco & SavageAUS

[surenmunoo]

I must be the only person having this issue with Sonoma. I just can't get it right with that "  Allow IOSkywalk Downgrade"  into Kernal-block - Its set to Exclude and is enabled but boot from verbose to Sonoma desktop is 5 minutes, and then I lose all what's shown below. This is what's shown in Ventura and Sonoma if I remove disable the Block.

 

With the Block enabled in kernel, Hackintool looks like below, Also can't see all other hard drives in Sonoma so it seems that it seems to block every thing for me. As you can see from below in Sonoma, OCLP shows all patches have been applied. 

 

 

[BALDY_MAN]

Just got wifi working on the 14.0 Beta (23A5286i) Z97 Hack

[surenmunoo]

Just now, BALDY_MAN said:

Just got wifi working on the 14.0 Beta (23A5286i) Z97 Hack

 

config.plist.zip

[BALDY_MAN]

21 minutes ago, surenmunoo said:

 

config.plist.zip 5.37 kB · 0 downloads

give me a Minuit