[pre-release] macOS Ventura

[fernando.c.neves]

Here the link of my EFI - Acer Aspire ES1-572 - OpenCore 0.8.4 - Ventura Beta 4.

 

https://drive.google.com/file/d/1yhoRlD8YdGtrvB6NlpsF3jYesZLbi0p5/view?usp=sharing

Now my Intel HD Graphics 520 (Skylake) shows as Intel UHD Graphics 617 with Metal 3 support.

Using MacBookPro15,2 SMBIOS.

Edited August 3, 2022 by fernando.c.neves

[fernando.c.neves]

I booted with -x arguments and yes I had Hardware acceleration in Ventura 13 Beta 3 with AppleIntelBDWGraphics.kext and AppleIntelBDWGraphicsFramebuffer.kext of Monterey 12.5. Showing in System Info that loaded kext. Intel Iris Plus Graphics 640 1536MB.

 

But without -x keeps looping after enable acceleration in Ventura Beta 3.

 

Edited August 3, 2022 by fernando.c.neves

[fernando.c.neves]

There something to workout in EFI of my MacBook Pro Retina Early 2015 (Intel Iris Graphics 6100) to stop looping boot with AppleIntelBDWGraphics.kext after loading.

 

Here my EFI link.

 

https://drive.google.com/file/d/1UNstmbDAttfJr1hKxuh5VASD8THfRWq5/view?usp=sharing

 

Thanks in advance!!!

[chris1111]

2 hours ago, PoMpIs said:

 

It has something to do with it, because when I delete it, if I don't put the computer to sleep, it doesn't regenerate, and therefore I don't have the problem again.

 

If I put it to sleep, when I wake it up the file is regenerated, but on my computer I don't get high CPU usage caused by "powerd" again until it goes back to sleep automatically and wakes up only a few hours later, And that's when the high CPU usage shows up.

 

I suppose that if you create a script in automator that deletes that file every time it wakes up from sleep, it would work normally... Or execute every time it wakes up from sleep "sudo pmset schedule cancelall" 🤷‍♂️

 

Something will have to be done, that beta 5 will take a few days, and I only have ventura installed on the computer 😀

@PoMpIs

Ive create a temporary fix

PmsetNoSchedule See Read Me

Works good on my HP EliteBook 840G4

 

CPU Usage after sleep

reboot + Login  Password Result this

 

 

Edited July 31, 2022 by chris1111

[D3v1L]

6 hours ago, PoMpIs said:

WTF!!! 😆

 

It's impossible, they come back a while after coming out of sleep..

 

I've been looking and this is the file:

 

HD > Library > Preferences > SystemConfiguration > com.apple.AutoWake.plist

 

 

I have deleted the file and as long as it does not go to sleep it does not create it again, but it is to put it to sleep and wake it up and it already has the same configuration😅

 

I have also tried to edit the file changing the dates to 2030... but when leaving sleep it creates other new entries automatically with the initial date

 

I'm going crazy 🤪

 

 

uhm......how it was? xD

 

 

 

ahahahah LoL xD 

 

mine after wake, all normal but strange things:

 

"the computer is scheduled to go to sleep automatically, if you do nothing it will go to sleep automatically in xx minutes and xx seconds" ... ...if I select "cancel" (Annulla) it will continue normally with normal work (normally)...

(tonight, it wake at 1:59am and it sleep at 2:00am like I schedule...so schedule setup via terminal is working ok)

 

Stay tuned for more Happy Days! (Weezer Buddy Holly from Arnold's docet on windows 95 clip xD LoL )

 

edit:

LoL much older than me xD ahahahahah

 

 

Edited July 31, 2022 by D3v1L

[Slice]

8 hours ago, prcmelo said:

@Slice Thanks for you help!!! But I'm getting the same problem with this CloverX64. All my Kexts are up to date. I'm sending my config.plist and boot log, thank you!!!

log.rtf 89.27 kB · 1 download config.plist 9.19 kB · 1 download

All looks good except:

1. I don't think you should use CsmVideoDxe.efi. It is for old cards not having UEFI BIOS.

2. The quirk EnableSafeModeSlide may cause Panic. Disable the quirk.

[Henties]

9 hours ago, eSaF said:

hopefully these bugs will be ironed out, so meanwhile just take it easy and Lean Back. 

I opt to disagree 😂 and would rephrase as follows:

 

"these bugs will be ironed out, so meanwhile just take it easy and Lean Back."

 

Greetings Henties  

[Henties]

7 hours ago, PoMpIs said:

Something will have to be done, that beta 5 will take a few days, and I only have ventura installed on the computer 😀

Wow, you are sure "living" on a knife's edge.

 

Greetings Henties

[Matgen84]

8 hours ago, SavageAUS said:

I have always been on developer updates.

I let the update happen and it all looks correct.

 

 

Hi @SavageAUS

Ventura Dev Beta 4 and Public Beta 2 have the same number version name : 13.0.22A5311f. 

[miliuco]

8 hours ago, chris1111 said:

@PoMpIs

Ive create a temporary fix

PmsetNoSchedule See Read Me

Works good on my HP EliteBook 840G4...

 

Thank you Chris. 

[PoMpIs]

9 hours ago, chris1111 said:

@PoMpIs

Ive create a temporary fix

PmsetNoSchedule See Read Me

Works good on my HP EliteBook 840G4

 

CPU Usage after sleep

reboot + Login  Password Result this

 

 

 

Thank you very much Chris1111 

 

PS: On the Lenovo 520s that problem still does not occur... I don't understand it

 

 

 

Edited July 31, 2022 by PoMpIs

[chris1111]

48 minutes ago, PoMpIs said:

 

Thank you very much Chris1111 

 

PS: On the Lenovo 520s that problem still does not occur... I don't understand it

 

@PoMpIs @miliuco

You're welcome it's a pleasure

 

[PoMpIs]

Has anyone tested if doing a clean installation of beta 4 stops the problem of high CPU usage by "powerd" from happening??

 

I did it today, and the operation is not like before, now it works like my Lenovo 520s... that is, those events are no longer generated when leaving sleep.

I only have this exactly the same as on the laptop...

 

 

Now I'm going to go out for a while and let it stay in sleep, and when I come back I'll check if it worked well.

[iGPU]

14 hours ago, chris1111 said:

@PoMpIs

Ive create a temporary fix

PmsetNoSchedule See Read Me

Works good on my HP EliteBook 840G4

 

CPU Usage after sleep

reboot + Login  Password Result this

 

 

 

 

Thanks, chris1111!

 

Power management notably better on my Z690 / i9 12900KF / Ventura ß4 (and fans are now quiet!):

 

[Slice]

1 hour ago, PoMpIs said:

Has anyone tested if doing a clean installation of beta 4 stops the problem of high CPU usage by "powerd" from happening??

 

I did it today, and the operation is not like before, now it works like my Lenovo 520s... that is, those events are no longer generated when leaving sleep.

I only have this exactly the same as on the laptop...

 

 

Now I'm going to go out for a while and let it stay in sleep, and when I come back I'll check if it worked well.

I installed beta 4 as an update to beta 3. Anyway I have no high power usage even after wake.

May be because of Clover?

[PoMpIs]

29 minutes ago, Slice said:

I installed beta 4 as an update to beta 3. Anyway I have no high power usage even after wake.

May be because of Clover?

 

Well, it could be, because I came back and it was suspended and when I woke it up, the events were not created with the other installation of Ventura that I have been updating since beta 1

 

This clean install stays the same after waking up from sleep:

 

 

🤷‍♂️

[Alex HQuest]

23 hours ago, Cyberdevs said:

Since when there were issues? I ask because i have installed up to dp 3 and didn't have much issues doin so. 

 

23 hours ago, Slice said:

I also have Ventura on Skylake CPU. 

The problem is Skylake graphics HD530.

 

Odd. I only asked since while the HD630 spoofing seemed to make installation go thru, by about 3/4 of the progress “Install macOS” hangs the machine while doing its wrap up, and the OS is never installed completely. Guess I'll poke around with my config, then - maybe whatever worked in Monterey doesn't play nicely as nicely with Ventura.

 

Device specs in my signature. Thanks, though.

 

 

 

Edited July 31, 2022 by Alex HQuest

[Anto65]

On 7/30/2022 at 1:36 PM, miliuco said:

No, I mean schedule to plan start, sleep... at a certain time, I can't find this feature in System Preferences >> Lock Screen, neither in Energy Saver.

 

However, Ventura Help says about Schedule:

"On your Mac, choose Apple menu > System Preferences, click Energy Saver, and then click Schedule."

 

In previous macOS:

I borrowed the app from Mrey  "System Preferences"  😆
It works perfectly on Ventura 

 

https://drive.google.com/file/d/1yxcaldstMQjF6Z3hMd2hfZvhX3J4B4de/view?usp=sharing  (... because it doesn't come from an identified developer 🙈)

set the stop at 19.25 and the awakening at 19.30 ... it works 

 

Edited July 31, 2022 by antuneddu

[Cyberdevs]

8 minutes ago, Alex HQuest said:

Odd. I only asked since while the HD630 spoofing seemed to make installation go thru, by about 3/4 of the progress “Install macOS” hangs the machine while doing its wrap up, and the OS is never installed completely.

 

Device specs in my signature.

Update your EFI and the kext to their latest, i've had some issues installing the 4th DP which got resolved by updating OC and the kexts to to their latest nightly versions on my KabyLake and AlderLake rigs I haven't tested it on my SkyLake tho.

[Alex HQuest]

4 minutes ago, Cyberdevs said:

Update your EFI and the kext to their latest, i've had some issues installing the 4th DP which got resolved by updating OC and the kexts to to their latest nightly versions on my KabyLake and AlderLake rigs I haven't tested it on my SkyLake tho.

Sorry, I should had stated that. I’ve got all OC code as fresh as of yesterday’s builds.

 

Do I still need that SklAsKbl whatever extension? Or was this included into WEG?

[Cyberdevs]

28 minutes ago, Alex HQuest said:

Sorry, I should had stated that. I’ve got all OC code as fresh as of yesterday’s builds.

 

Do I still need that SklAsKbl whatever extension? Or was this included into WEG?

AFIAK it was included in the WEG all you need to do is to add the correct iGPU info like ig-platform-id (of the closes KabyLake relative to your iGPU) and the device-id for instance for my HD530 (i7 6700K) I used the following settings:

But then again i haven't tested the latest beta so somethings might have changed in the lates beta (which I doubt)

[Slice]

11 minutes ago, Cyberdevs said:

AFIAK it was included in the WEG all you need to do is to add the correct iGPU info like ig-platform-id (of the closes KabyLake relative to your iGPU) and the device-id for instance for my HD530 (i7 6700K) I used the following settings:

But then again i haven't tested the latest beta so somethings might have changed in the lates beta (which I doubt)

I tested without WEG this two keys... Logically it is enough but panic.

[Cyberdevs]

9 minutes ago, Slice said:

I tested without WEG this two keys... Logically it is enough but panic.

What about using WEG? does it still end up with a KP? I will test it later and see how it goes on my end.

[miliuco]

1 hour ago, antuneddu said:

I borrowed the app from Mrey  "System Preferences"  😆
It works perfectly on Ventura...

 

Interesting. Strange that it says unidentified developer (it's Apple). And Schedule works.

[Cyberdevs]

@Alex HQuest 

I just finished installing Ventura DP4 on my SkyLake rig:

@Slice I know you don't use WEG but there were no issues on my SkyLake rig using the settings I mentioned earlier in combination with WEG.