miliuco Posted March 19, 2022 Share Posted March 19, 2022 @Ellybz @antuneddu Although I don't have graphics issues in 12.3, I've tried the patch in config.plist, Henbury framebuffer since it's RX 6600 XT. With this patch the GPU temperature drops approx. 15º from 50 to 35. For some reason that I don't know, Henbury framebuffer deactivates Zero RPM and the GPU fans spin all the time unlike the default situation in which they only spin at 60º or more. Now I hear the fans continuously although at very low volume. On Windows the RX 6600 XT also has Zero RPM so this seems to be the option by design. Do you have noticed if Zero RPM is deactivated when using this patch? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2778530 Share on other sites More sharing options...
Ellybz Posted March 19, 2022 Share Posted March 19, 2022 2 hours ago, miliuco said: @Ellybz @antuneddu Although I don't have graphics issues in 12.3, I've tried the patch in config.plist, Henbury framebuffer since it's RX 6600 XT. With this patch the GPU temperature drops approx. 15º from 50 to 35. For some reason that I don't know, Henbury framebuffer deactivates Zero RPM and the GPU fans spin all the time unlike the default situation in which they only spin at 60º or more. Now I hear the fans continuously although at very low volume. On Windows the RX 6600 XT also has Zero RPM so this seems to be the option by design. Do you have noticed if Zero RPM is deactivated when using this patch? No issues for me on RX580. I was just reporting some infos I crossed for radeon 5000/6000 series. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2778540 Share on other sites More sharing options...
Aigors Posted March 21, 2022 Share Posted March 21, 2022 Hi, I apologize in case of wrong question, but i don't know in which section ask. Do OPencore could booted from network via Ipxe to performa installation via network instead of USB stick? Many Thanks Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2778713 Share on other sites More sharing options...
deeveedee Posted March 22, 2022 Share Posted March 22, 2022 (edited) @Aigors There is a way to recover real macs via network boot, but I've never seen anyone document a "from scratch" installation of macOS on a hackintosh via network. IMO, best to create a USB stick installer with an OC boot loader. Ciao. Edited March 22, 2022 by deeveedee 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2778813 Share on other sites More sharing options...
SavageAUS Posted March 26, 2022 Share Posted March 26, 2022 From another forum... Adding the following device properties to your NAVI GPU should solve the issue. ( same frame buffer for XT & non XT ) To be tested with caution! Radeon 6900 -> ATY , Carswell Radeon 6800 -> ATY , Belknap Radeon 6600 -> ATY , Henbury Radeon 5700 -> ATY , Adder Radeon 5500 -> ATY , Python If none of the above framebuffer are working, You can also try -> ATY, Deepbay Best of luck ! I’ll give this a try when I’m set back up. Waiting on a new desk and AIO CPU cooler. Maybe with these properties I’ll be able to use hdmi instead of display port. Sent from my iPhone using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2778931 Share on other sites More sharing options...
Aigors Posted March 26, 2022 Share Posted March 26, 2022 On 3/23/2022 at 12:54 AM, deeveedee said: @Aigors There is a way to recover real macs via network boot, but I've never seen anyone document a "from scratch" installation of macOS on a hackintosh via network. IMO, best to create a USB stick installer with an OC boot loader. Ciao. Hi, thanks for answer, you suggest to dig in "Howto boot real mac from network" ? I remember my old research, but, as you wrote, there isn't any clear doc about it Thanks Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2778950 Share on other sites More sharing options...
ameenjuz Posted March 28, 2022 Share Posted March 28, 2022 Hi guys i have a laptop 10th gen i3 Please tell me which smbois suitable for laptop 10th gen i3 to working monterey 12.3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779035 Share on other sites More sharing options...
aben Posted March 28, 2022 Share Posted March 28, 2022 14 minutes ago, ameenjuz said: Hi guys i have a laptop 10th gen i3 Please tell me which smbois suitable for laptop 10th gen i3 to working monterey 12.3 10th gen would be Ice Lake which also happens to be the final generation of Intel x86 processors seen in Apple's MacBook lineup before they transitioned to M-series SoCs. Most appropriate choice would be SMBIOS: MacBookAir9,1 since its base model too had an i3 based off Ice Lake. 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779036 Share on other sites More sharing options...
deeveedee Posted March 28, 2022 Share Posted March 28, 2022 (edited) According to FeatureUnlock.kext ReadMe, FeatureUnlock.kext unlocks "AirPlay to Mac" for Macmini6,x - Macmini8,1. For those using FeatureUnlock.kext with their MacMini8,1, it appears that "AirPlay to Mac" unlocking is just being added with this commit (meaning that it will be available for MacMini8,1 beginning with FeatureUnlock.kext v1.0.8). Is that the way you interpret this? Edited March 29, 2022 by deeveedee 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779093 Share on other sites More sharing options...
miliuco Posted March 28, 2022 Share Posted March 28, 2022 @deeveedee Yes, I interpret this as you. Haven't tried it. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779095 Share on other sites More sharing options...
aben Posted March 29, 2022 Share Posted March 29, 2022 (edited) @deeveedee As far as I'm aware, this is what actually happened in relation to the Mac mini situation: According to Apple's official support page, macOS Monterey's AirPlay to Mac feature is available on Mac mini 2020 and later however it turns out that the feature was actually present and enabled on 2018 Mac minis as well up until macOS 12.2.1. Weirdly, all T2 equipped Macs from 2018 and later are included except the T2 equipped Mac mini from 2018; most likely a deliberate marketing decision or a genuine overlook from Apple's part. In any case the feature was later removed from the 2018 Mac mini starting from macOS 12.3 now aligning with Apple's support claims however these events has obviously led to frustrated Mac mini users, hence the support for Macmini8,1 was added to FeatureUnlock upon request. Sources: https://forums.macrumors.com/threads/airplay-from-iphone-to-mac-mini-2018.2324107/https://www.reddit.com/r/MacOS/comments/tj97xz/airplay_receiver_is_gone_from_mac_mini_2018_after/ Edited March 29, 2022 by aben 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779139 Share on other sites More sharing options...
Guest 5T33Z0 Posted March 30, 2022 Share Posted March 30, 2022 I've noticed when booting Windows through OpenCore and "ResetLogoStatus" is enabled, I see the Logo that comes with my mainboard during the Windows boot phase, but it's misalligned: Usually, it's centered. If I disable "ResetLogoStatus", there's no logo at all, which I don't mind. I am just wondering if there's a way to fix the allignment. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779167 Share on other sites More sharing options...
deeveedee Posted March 31, 2022 Share Posted March 31, 2022 @5T33Z0 I don't remember the details, but I experienced boot issues with my rig when "ResetLogoStatus" was enabled. I have disabled this quirk and am running fine without it. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779199 Share on other sites More sharing options...
Guest 5T33Z0 Posted April 1, 2022 Share Posted April 1, 2022 (edited) Saw this new Dictionary in the latest build. "Read and set serial PCD values from config". But I have no idea what that is or does: Seems to be related to network settings. Firefox on my IvyBridge Notebook seens to load pages faster now that I added this dict. Nice. Edited April 1, 2022 by 5T33Z0 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779215 Share on other sites More sharing options...
Matgen84 Posted April 1, 2022 Share Posted April 1, 2022 (edited) 3 hours ago, 5T33Z0 said: Saw this new Dictionary in the latest build. "Read and set serial PCD values from config". But I have no idea what that is or does: Seems to be related to network settings. Firefox on my IvyBridge Notebook seens to load pages faster now that I added this dict. Nice. Hi @5T33Z0 I don't find this new dictionary in sample.plist and samplecustom.plist at OC Github repository. Nothing inside Configuration.pdf Where do you find the explanations for setting. Please. Edited April 1, 2022 by Matgen84 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779220 Share on other sites More sharing options...
Guest 5T33Z0 Posted April 1, 2022 Share Posted April 1, 2022 @Matgen84 https://github.com/acidanthera/OpenCorePkg/actions >> OcMainLib: Read and set serial PCD values from config Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779222 Share on other sites More sharing options...
ghost8282 Posted April 1, 2022 Share Posted April 1, 2022 3 hours ago, 5T33Z0 said: "Read and set serial PCD values from config" Nothing to do with 'network', firefox loading faster is a placebo effect. It's for serial connections, related to this: https://github.com/acidanthera/bugtracker/issues/1954 3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779224 Share on other sites More sharing options...
miliuco Posted April 1, 2022 Share Posted April 1, 2022 (edited) @ghost8282 Thanks for the link to the issue. Yes, it has to do with serial port initialisation prior to debug logging. It is accompanied by the removal of the Misc >> Debug >> SerialInit key which it replaces by providing more options and fixing some things. Edited April 1, 2022 by miliuco 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779227 Share on other sites More sharing options...
Guest 5T33Z0 Posted April 1, 2022 Share Posted April 1, 2022 (edited) Okay. Anyways: do not use OCAT for updating to this built yet. Do it manually for now. Because since the dict is not incorporated in the GUI as a tab yet, it will be deleted once you save the config which in return will result in errors reported by OCValidate. Edited April 1, 2022 by 5T33Z0 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779232 Share on other sites More sharing options...
Matgen84 Posted April 1, 2022 Share Posted April 1, 2022 3 hours ago, 5T33Z0 said: @Matgen84 https://github.com/acidanthera/OpenCorePkg/actions >> OcMainLib: Read and set serial PCD values from config @5T33Z0 Thanks. This commit is not yet implemented in Master Branch, only pcd-test. After building latest commit 3f930d0 (3 days ago) from Master, OCValidate detect, of course, no error without the new Serial key from config.plist. So, for the moment, wait and see 🙂 1 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779246 Share on other sites More sharing options...
Stefanalmare Posted April 8, 2022 Share Posted April 8, 2022 With the last build c953fa0, I always get "OCS: Couldn't parse serialized file!", but I have no problem booting. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779563 Share on other sites More sharing options...
Stefanalmare Posted April 8, 2022 Share Posted April 8, 2022 (edited) 27 minutes ago, eSaF said: No such problem here with latest 'master' commit. Reveal hidden contents You "ocvalidate" the config.plist? Edited April 8, 2022 by Stefanalmare Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779571 Share on other sites More sharing options...
Extreme™ Posted April 8, 2022 Share Posted April 8, 2022 4 hours ago, Stefanalmare said: With the last build c953fa0, I always get "OCS: Couldn't parse serialized file!", but I have no problem booting. Same here. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779578 Share on other sites More sharing options...
Stefanalmare Posted April 8, 2022 Share Posted April 8, 2022 (edited) 9 minutes ago, eSaF said: Yes I did, if anything was out of sync the Tick symbol would be a red exclamation symbol. Here is the proof all is well with latest commit on my system. Reveal hidden contents Spoiler Edited April 8, 2022 by Stefanalmare Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779580 Share on other sites More sharing options...
Guest 5T33Z0 Posted April 8, 2022 Share Posted April 8, 2022 (edited) Sane here. I guess OCAT uses OCValidate from the previous built where it was fixed and doesn't produce errors. Edited April 8, 2022 by 5T33Z0 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/307/#findComment-2779598 Share on other sites More sharing options...
Recommended Posts