telepati Posted March 21, 2020 Share Posted March 21, 2020 34 minutes ago, nmano said: Hi All OC boot from USB Flash Drive{EFI}. Failed to locate bootstrap protocol - Not Found I have this Error Its normal or not? Thanks for your support. You won't boot from EFI. You will boot from USB itself. 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713188 Share on other sites More sharing options...
Bluesnowball3 Posted March 21, 2020 Share Posted March 21, 2020 I am still unable to boot from the USB installer-Catalina-Z170 P-Skylake. After the Apple symbol it shuts down. One of the error messages is:AppleUSBHostPort Disconnect: numerous enumeration failures. For some reason this message appears on the screen but I cannot see it in the boot log. I have now tried disconnecting the mouse and keyboard and the message disappears. Obiously I need to map the USB ports but I do not see how I can do this until I can boot in to Catalina. I cannot access disk utulity. If I press command plus R after the Apple symbole nothing happens, the same if I do it earlier. it still shuts down after the Apple symbol. I have extracted DSDT using SSDTime and put it in my ACPI folder. I read somewhere that Opencore does this and so it is not needed, is this correct? I have set Platform info for MacPro 1,1. I have compiled SSDT-PLUG and SSDT-EC-USBX using iasl-win and SSDTime as per the Skylake vanilla desktop guide and Opencore Base Set Up guide. I do not know how to set Plug In type, however I now have access to a Mac and will try to figure this out. One of the error messages when I boot with the Windows disc attached is: OCB: Matching <> args on type 3 0 31:337 00:229 OCFS: Filename \ has trailing slash Should I change the slash to the other way? When I boot with the Window disc disconnected I do not get this message. My target disc is formatted as HFS+ and GPT using Paragon. Thanks in advance for any help. I attach the boot file with the windows disc connected, the second one is with it disconneted and my config.plist. David opencore-2020-03-17-200146.txt opencore-2020-03-17-201424.txt config.plist Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713192 Share on other sites More sharing options...
Shaneee Posted March 21, 2020 Share Posted March 21, 2020 17 hours ago, Hector van der Aa said: you will need nullcpupowermanagement.kext if you are running on and and based platform No you don't. Either use the DummyPowerManagement quirk or use an appropriate SSDT_PLUG file. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713193 Share on other sites More sharing options...
nmano Posted March 21, 2020 Share Posted March 21, 2020 50 minutes ago, telepati said: You won't boot from EFI. You will boot from USB itself. I am booting from USB. config.plist How to fix that Error? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713197 Share on other sites More sharing options...
Andrey1970 Posted March 21, 2020 Share Posted March 21, 2020 1 hour ago, nmano said: Failed to locate bootstrap protocol - Not Found Its normal 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713199 Share on other sites More sharing options...
telepati Posted March 21, 2020 Share Posted March 21, 2020 24 minutes ago, nmano said: I am booting from USB. config.plist How to fix that Error? Your config.plist is just a mess. Are you really need all those patches? Skylake-X just needs 3 SSDT's your config has full off SSDT's. You are not using Audio but you activate Audio driver. WHY? Also, the sound! You are almost using every sound option in your system. alcid=, Device Properties and SSDT's. Choose one and delete others. If you are using the easiest method (alcid=) why you also activate the sound in your Device Properties? USB port limit patches WHY? You are already created USBport.kext with Hackintool why you need port limit patches? Read Vanilla Desktop Guide and configure your plist from the start. Man, you don't even delete the warning messages are you really need those? 2 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713205 Share on other sites More sharing options...
telepati Posted March 21, 2020 Share Posted March 21, 2020 1 hour ago, Bluesnowball3 said: I am still unable to boot from the USB installer-Catalina-Z170 P-Skylake. After the Apple symbol it shuts down. One of the error messages is:AppleUSBHostPort Disconnect: numerous enumeration failures. For some reason this message appears on the screen but I cannot see it in the boot log. I have now tried disconnecting the mouse and keyboard and the message disappears. Obiously I need to map the USB ports but I do not see how I can do this until I can boot in to Catalina. I cannot access disk utulity. If I press command plus R after the Apple symbole nothing happens, the same if I do it earlier. it still shuts down after the Apple symbol. I have extracted DSDT using SSDTime and put it in my ACPI folder. I read somewhere that Opencore does this and so it is not needed, is this correct? I have set Platform info for MacPro 1,1. I have compiled SSDT-PLUG and SSDT-EC-USBX using iasl-win and SSDTime as per the Skylake vanilla desktop guide and Opencore Base Set Up guide. I do not know how to set Plug In type, however I now have access to a Mac and will try to figure this out. One of the error messages when I boot with the Windows disc attached is: OCB: Matching <> args on type 3 0 31:337 00:229 OCFS: Filename \ has trailing slash Should I change the slash to the other way? When I boot with the Window disc disconnected I do not get this message. My target disc is formatted as HFS+ and GPT using Paragon. Thanks in advance for any help. I attach the boot file with the windows disc connected, the second one is with it disconneted and my config.plist. David opencore-2020-03-17-200146.txt opencore-2020-03-17-201424.txt config.plist Why do you think people have recorded system information in their signature area? is it for fun? Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713207 Share on other sites More sharing options...
nmano Posted March 21, 2020 Share Posted March 21, 2020 45 minutes ago, telepati said: Your config.plist is just a mess. Are you really need all those patches? Skylake-X just needs 3 SSDT's your config has full off SSDT's. You are not using Audio but you activate Audio driver. WHY? Also, the sound! You are almost using every sound option in your system. alcid=, Device Properties and SSDT's. Choose one and delete others. If you are using the easiest method (alcid=) why you also activate the sound in your Device Properties? USB port limit patches WHY? You are already created USBport.kext with Hackintool why you need port limit patches? Read Vanilla Desktop Guide and configure your plist from the start. Man, you don't even delete the warning messages are you really need those? I agree my config its mess. My System have 34 USB pors. I Disable AudioDxe.efi I don't Active sound in Device Properties.Its was Disable. Check My config.plist Thank you Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713214 Share on other sites More sharing options...
telepati Posted March 21, 2020 Share Posted March 21, 2020 (edited) @nmano are using all ports. Probably No! if the port is empty just disable it you don't need that. The picture you show for the sound it is clearly saying audio is active. These are all rubbish. Edited March 21, 2020 by telepati 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713217 Share on other sites More sharing options...
nmano Posted March 21, 2020 Share Posted March 21, 2020 10 minutes ago, telepati said: @nmano are using all ports. Probably No! if the port is empty just disable it you don't need that. These are all rubbish. If I want to Disable HS07/SS07 HS08/SS08 How to do that? USBPorts.kext.zip Thanks. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713220 Share on other sites More sharing options...
telepati Posted March 21, 2020 Share Posted March 21, 2020 (edited) @nmano Write down the ports you use, then create a new USBport.kext with the help of Hackintool. There is a guide on how to do it in Hackintool. Edited March 21, 2020 by telepati 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713226 Share on other sites More sharing options...
vit9696 Posted March 21, 2020 Share Posted March 21, 2020 On 3/20/2020 at 8:26 PM, tarkh said: Hello guys, maybe my problem related to OpenCore, so I'll post here. I'm having KP while trying to boot Recovery partition. macOS 10.14.6 works just fine without issues. My system: OpenCore, ASUS x99 Deluxe, Intel 5960X, Nvidia GT 740 Attaching screenshot and my EFI folder. Help would be appreciated ! ----- Some update: If I disable _xcpm_bootstrap Pike R. Alpha kernel patch, then I'm getting different error - hanging on PCI configuration begin (IMG attached) ----- EFI.zip This is with AppleALC, the crash in particular should be resolved in master. But the rest is up to you. 3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713232 Share on other sites More sharing options...
topolino1 Posted March 22, 2020 Share Posted March 22, 2020 (edited) On 3/5/2020 at 6:55 PM, MacNB said: I enabled AudioPicker it works well. I don't really need it as my eye sight is fine (at the moment). I turned it off, then enabled PlayChime and rebooted. Hi, @vit9696, @Download-Fritz, @Pavo @MacNB and everyone. I am very happy with the graphic and sound mode. Thanks to everyone who worked on it. It gets really interesting;) This is my problem: PickerAudioAssist works for me. During start the sound "OCEFIAudio_en_Welcome.wav" starts. PlayChime was also working, "AXEFIAudio_VoiceOver_Boot.wav" could be heard when starting OS X. After NVRAM restart, "AXEFIAudio_VoiceOver_Boot.wav" cannot be heard. One more question, does the mouse work in graphic mode? Can anyone know what needs to be repaired? Thank you for your help. A Edited March 23, 2020 by topolino1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713245 Share on other sites More sharing options...
mhaeuser Posted March 22, 2020 Share Posted March 22, 2020 @topolino1 Do you use AudioDxe by Goldfish? If you use AudioDxe from AppleSupportPkg and configure it via config.plist, NVRAM resets should not break VoiceOver 1 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713272 Share on other sites More sharing options...
emperor95 Posted March 22, 2020 Share Posted March 22, 2020 (edited) Hi, Thanks to Hector van der Aa, I followed the YouTube tutorial that he attached. I found out that my ACPI folder was incorrect and the DSDT.aml file was missing. Now I successfully installed Catalina, but I had no keyboard during install. (When it asked username I pasted letters one by one from the previous user agreement textbox). The OS was booted correctly, everything was fine except for I had no keyboard, while mouse worked flawelessly. When I rebooted I cannot type in my password, so can't enter to macOS. At startup keyboard leds are on for my keyboard and mouse. I can go to UEFI. I have keyboard until I choose my macOS drive from OC command window. Then suddenly keyboard and mouse leds shuts off, after 10-20 secs mouse comes back, but the keyboard doesn't. I tried all USB ports on my MoBo (USB2, USB3) and a PS2 keyboard, but my problem is not solved. Everything is set to enabled under USB option in UEFI. (EHCI, XHCI) While mouse works on all usb ports, so they are enabled, I think... Do you have any further ideas what can be the solution? (My MoBo: Asrock Z77 Extreme4) Update: Added GenericUSBXHCI.kext, but nothing has changed. My EC folder looks like this now: ACPI -DSDT.aml -SSDT-EC.aml -SSDT-EC.dsl Drivers -ApfsDriverLoader.efi -AudioDxe.efi -FwRuntimeServices.efi -HfsPlus.efi Kexts -AppleAHCIPort.kext -AppleALC.kext -FakePCIID.kext -FakePCIID_BCM57XX_as_BCM57765.kext -IONetworkingFamily.kext -Lilu.kext -SMCProcessor.kext -SMCSuperIO.kext -USBInjectAll.kext -VirtualSMC.kext -WhateverGreen.kext -.DS_Store Tools config.plist OpenCore.efi Edited March 22, 2020 by emperor95 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713276 Share on other sites More sharing options...
telepati Posted March 22, 2020 Share Posted March 22, 2020 Anyone knows what is this ACPI error and is it important or not? am I fix these? how? 2020-03-22 17:17:03.566688+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566688+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566690+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [\_PR_.PR00] 2020-03-22 17:17:03.566690+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [\_PR_.PR00] 2020-03-22 17:17:03.566691+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> Namespace lookup failure, AE_NOT_FOUND 2020-03-22 17:17:03.566692+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> Namespace lookup failure, AE_NOT_FOUND 2020-03-22 17:17:03.566693+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/dswload-292) 2020-03-22 17:17:03.566694+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/dswload-292) 2020-03-22 17:17:03.566695+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566695+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566696+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog 2020-03-22 17:17:03.566696+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog 2020-03-22 17:17:03.566698+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/psobject-310) 2020-03-22 17:17:03.566698+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/psobject-310) 2020-03-22 17:17:03.566728+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566729+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566731+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:freqdata) while loading table 2020-03-22 17:17:03.566731+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:freqdata) while loading table 2020-03-22 17:17:03.566732+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-319) 2020-03-22 17:17:03.566733+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-319) 2020-03-22 17:17:03.566993+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566993+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566994+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful 2020-03-22 17:17:03.566994+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful 2020-03-22 17:17:03.566996+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-342) 2020-03-22 17:17:03.566996+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-342) 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713320 Share on other sites More sharing options...
medallo Posted March 22, 2020 Share Posted March 22, 2020 hi. is there any guide to start with opencore? .thanks Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713324 Share on other sites More sharing options...
telepati Posted March 22, 2020 Share Posted March 22, 2020 20 minutes ago, medallo said: hi. is there any guide to start with opencore? .thanks https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/ 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713329 Share on other sites More sharing options...
Matgen84 Posted March 22, 2020 Share Posted March 22, 2020 29 minutes ago, telepati said: Anyone knows what is this ACPI error and is it important or not? am I fix these? how? 2020-03-22 17:17:03.566688+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566688+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566690+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [\_PR_.PR00] 2020-03-22 17:17:03.566690+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [\_PR_.PR00] 2020-03-22 17:17:03.566691+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> Namespace lookup failure, AE_NOT_FOUND 2020-03-22 17:17:03.566692+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> Namespace lookup failure, AE_NOT_FOUND 2020-03-22 17:17:03.566693+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/dswload-292) 2020-03-22 17:17:03.566694+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/dswload-292) 2020-03-22 17:17:03.566695+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566695+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566696+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog 2020-03-22 17:17:03.566696+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog 2020-03-22 17:17:03.566698+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/psobject-310) 2020-03-22 17:17:03.566698+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/psobject-310) 2020-03-22 17:17:03.566728+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566729+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566731+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:freqdata) while loading table 2020-03-22 17:17:03.566731+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:freqdata) while loading table 2020-03-22 17:17:03.566732+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-319) 2020-03-22 17:17:03.566733+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-319) 2020-03-22 17:17:03.566993+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566993+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566994+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful 2020-03-22 17:17:03.566994+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful 2020-03-22 17:17:03.566996+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-342) 2020-03-22 17:17:03.566996+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-342) I don't know if it's important or not. But few days ago, I've ACPI errors on my Z390: I replace SSDT-Awak to SSDT-RTC0: no warning messages. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713330 Share on other sites More sharing options...
Pavo Posted March 22, 2020 Share Posted March 22, 2020 31 minutes ago, telepati said: Anyone knows what is this ACPI error and is it important or not? am I fix these? how? 2020-03-22 17:17:03.566688+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566688+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566690+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [\_PR_.PR00] 2020-03-22 17:17:03.566690+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> [\_PR_.PR00] 2020-03-22 17:17:03.566691+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> Namespace lookup failure, AE_NOT_FOUND 2020-03-22 17:17:03.566692+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> Namespace lookup failure, AE_NOT_FOUND 2020-03-22 17:17:03.566693+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/dswload-292) 2020-03-22 17:17:03.566694+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/dswload-292) 2020-03-22 17:17:03.566695+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566695+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566696+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog 2020-03-22 17:17:03.566696+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> During name lookup/catalog 2020-03-22 17:17:03.566698+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/psobject-310) 2020-03-22 17:17:03.566698+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/psobject-310) 2020-03-22 17:17:03.566728+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566729+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Exception: AE_NOT_FOUND, 2020-03-22 17:17:03.566731+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:freqdata) while loading table 2020-03-22 17:17:03.566731+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (SSDT:freqdata) while loading table 2020-03-22 17:17:03.566732+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-319) 2020-03-22 17:17:03.566733+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-319) 2020-03-22 17:17:03.566993+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566993+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> ACPI Error: 2020-03-22 17:17:03.566994+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful 2020-03-22 17:17:03.566994+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> 1 table load failures, 14 successful 2020-03-22 17:17:03.566996+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-342) 2020-03-22 17:17:03.566996+0300 localhost kernel[0]: (AppleACPIPlatform) <AppleACPIPlatform`AcpiOsVprintf> (20160930/tbxfload-342) This means your SSDT-PLUG has the wrong Scope (\_PR.PR00), you need to double check your original ACPI tables and see what your CPU device is named as and correct the SSDT-PLUG. 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713331 Share on other sites More sharing options...
chiyiangel Posted March 22, 2020 Share Posted March 22, 2020 hi guys! Kernel Panic crash when i upgrade 0.5.5 to 0.5.6. screen shot with attachments. here is my EFI (with crash) and opencore dumpfile EFI_kernel_panic.zip opencore-2020-03-22-152550.txt Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713334 Share on other sites More sharing options...
Pavo Posted March 22, 2020 Share Posted March 22, 2020 21 minutes ago, chiyiangel said: hi guys! Kernel Panic crash when i upgrade 0.5.5 to 0.5.6. screen shot with attachments. here is my EFI (with crash) and opencore dumpfile EFI_kernel_panic.zip opencore-2020-03-22-152550.txt Fillout your signature block with your system specs. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713336 Share on other sites More sharing options...
mhaeuser Posted March 22, 2020 Share Posted March 22, 2020 @chiyiangel Update FwRuntimeServices 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713339 Share on other sites More sharing options...
telepati Posted March 22, 2020 Share Posted March 22, 2020 (edited) 1 hour ago, Pavo said: This means your SSDT-PLUG has the wrong Scope (\_PR.PR00), you need to double check your original ACPI tables and see what your CPU device is named as and correct the SSDT-PLUG. When I checked my Processor Scope; Looks down below; Scope (_SB) { Processor (PR00, 0x01, 0x00001810, 0x06){} Processor (PR01, 0x02, 0x00001810, 0x06){} Processor (PR02, 0x03, 0x00001810, 0x06){} Processor (PR03, 0x04, 0x00001810, 0x06){} Processor (PR04, 0x05, 0x00001810, 0x06){} Processor (PR05, 0x06, 0x00001810, 0x06){} Processor (PR06, 0x07, 0x00001810, 0x06){} Processor (PR07, 0x08, 0x00001810, 0x06){} Processor (PR08, 0x09, 0x00001810, 0x06){} Processor (PR09, 0x0A, 0x00001810, 0x06){} Processor (PR10, 0x0B, 0x00001810, 0x06){} Processor (PR11, 0x0C, 0x00001810, 0x06){} Processor (PR12, 0x0D, 0x00001810, 0x06){} Processor (PR13, 0x0E, 0x00001810, 0x06){} Processor (PR14, 0x0F, 0x00001810, 0x06){} Processor (PR15, 0x10, 0x00001810, 0x06){} } And I am using this .dsl. I just open this .dsl with MaciASL app and save as a .aml file. But I have still getting the error. Am I doing something wrong? /* * XCPM power management compatibility table. */ DefinitionBlock ("", "SSDT", 2, "CpuRef", "CpuPlug", 0x00003000) { External (_SB.PR00, ProcessorObj) Scope (_SB.PR00) { Method (DTGP, 5, NotSerialized) { If ((Arg0 == ToUUID ("a0b5b7c6-1318-441c-b0c9-fe695eaf949b"))) { If ((Arg1 == One)) { If ((Arg2 == Zero)) { Arg4 = Buffer (One) { 0x03 // . } Return (One) } If ((Arg2 == One)) { Return (One) } } } Arg4 = Buffer (One) { 0x00 // . } Return (Zero) } Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Local0 = Package (0x02) { "plugin-type", One } DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } } Edited March 22, 2020 by telepati Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713340 Share on other sites More sharing options...
Matgen84 Posted March 22, 2020 Share Posted March 22, 2020 44 minutes ago, telepati said: When I checked my Processor Scope; Looks down below; Scope (_SB) { Processor (PR00, 0x01, 0x00001810, 0x06){} Processor (PR01, 0x02, 0x00001810, 0x06){} Processor (PR02, 0x03, 0x00001810, 0x06){} Processor (PR03, 0x04, 0x00001810, 0x06){} Processor (PR04, 0x05, 0x00001810, 0x06){} Processor (PR05, 0x06, 0x00001810, 0x06){} Processor (PR06, 0x07, 0x00001810, 0x06){} Processor (PR07, 0x08, 0x00001810, 0x06){} Processor (PR08, 0x09, 0x00001810, 0x06){} Processor (PR09, 0x0A, 0x00001810, 0x06){} Processor (PR10, 0x0B, 0x00001810, 0x06){} Processor (PR11, 0x0C, 0x00001810, 0x06){} Processor (PR12, 0x0D, 0x00001810, 0x06){} Processor (PR13, 0x0E, 0x00001810, 0x06){} Processor (PR14, 0x0F, 0x00001810, 0x06){} Processor (PR15, 0x10, 0x00001810, 0x06){} } And I am using this .dsl. I just open this .dsl with MaciASL app and save as .aml file. But I have still this error. Am I doing something wrong? /* * XCPM power management compatibility table. */ DefinitionBlock ("", "SSDT", 2, "CpuRef", "CpuPlug", 0x00003000) { External (_SB.PR00, ProcessorObj) Scope (_SB.PR00) { Method (DTGP, 5, NotSerialized) { If ((Arg0 == ToUUID ("a0b5b7c6-1318-441c-b0c9-fe695eaf949b"))) { If ((Arg1 == One)) { If ((Arg2 == Zero)) { Arg4 = Buffer (One) { 0x03 // . } Return (One) } If ((Arg2 == One)) { Return (One) } } } Arg4 = Buffer (One) { 0x00 // . } Return (Zero) } Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Local0 = Package (0x02) { "plugin-type", One } DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } } SSDT-PLUG.aml below SSDT-PLUG.aml.zip 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/144/#findComment-2713348 Share on other sites More sharing options...
Recommended Posts