Open source cross-platform OpenCore Auxiliary Tools（OCAT)

[ic005k]

31 minutes ago, eSaF said:

Sorry same result.

Has it ever worked properly before? Or has it not been working properly since the automatic update feature was added?

[vit9696]

@eSaF, instead of posting just the screens please also post the textual details, which can be reached after pressing the Show details button. Screens basically give nothing to the investigation and the crash that looks the same may actually be a completely different issue.

 

@ic005k, the fix does not actually look sufficient to me, while 0 is handled now, the value can still be very large. You should check that `i` is less than the list size before calling the at() method.

 

Edited October 14, 2021 by vit9696

[ic005k]

@vit9696 It didn't seem to be caused by this, I changed my approach. Or without converting the byte count (without using this function), the problem remains the same for @eSaF.

 

https://github.com/ic005k/QtOpenCoreConfig/blob/18d86b2ac516506d95ff2dff7bf76ece2dac3927/autoupdatedialog.cpp#L328

@eSaF Please test the following and see if you have the same problem.

 

https://github.com/ic005k/QtOpenCoreConfig/suites/4049675579/artifacts/102689942

[Guest 5T33Z0]

2 hours ago, ic005k said:

 @5T33Z0 @niknod  Please download the one below to try it out, thanks.

 

https://github.com/ic005k/QtOpenCoreConfig/suites/4048881233/artifacts/102661315

 

Downloaded this. Checked for updates. There weren't any. It didn't crash.

Next, I Updated OpenCore…

And it killed my Config. AGAIN.

My Laptop config…

 

Not only did it kill my config, it also managed to somehow,  put in some code from my clover config as well. I noticed it because I have some deactivated USB port patches by PMheart in the clover config. And all of a sudden I find this code in my corrupted opencore config. I am using bootloader chooser so the clover folder also lives in the EFI folder.

 

[ic005k]

@5T33Z0 Please attach the corrupted config.plist. did you open Clover's config.plist using OCAT or what editor did you use to edit Clover's config.plist?

25 minutes ago, 5T33Z0 said:

Not only did it kill my config, it also managed to somehow,  put in some code from my clover config as well.

It sounds a little confusing to me, not very understandable.

[ic005k]

46 minutes ago, 5T33Z0 said:

Downloaded this. Checked for updates. There weren't any. It didn't crash.

Did you select "Download Upgrade Package" under the "Help" menu? Can I download and upgrade normally afterwards?

[ic005k]

24 minutes ago, eSaF said:

Version:               0.7.5 - 20211017 (0.7.5 - 20211017)

The link you downloaded seems to be incorrect, it should be 20211018.
I'll post a new version later, and you can try again.

[ic005k]

@eSaF Please download the latest 20211018 manually, and then select "Download Upgrade Package" under the "Help" menu to see if there is any problem?

 

https://github.com/ic005k/QtOpenCoreConfig/releases/tag/20211018

 

If there is a problem, please attach the crash log.

Edited October 14, 2021 by ic005k

[ic005k]

@eSaF It seems that the total number of bytes is not correct, although the app does not crash.
Do you download more times to see? Is it all the same result?

[ic005k]

9 minutes ago, eSaF said:

Second Test from new Update.

Okay, same result. It no longer crashes, but it can't get the full byte count of the file. I will try to fix this issue, thanks for cooperating.

[Guest 5T33Z0]

5 hours ago, ic005k said:

@5T33Z0 Please attach the corrupted config.plist. did you open Clover's config.plist using OCAT or what editor did you use to edit Clover's config.plist?

It sounds a little confusing to me, not very understandable.

 

Here is the corrupted OpenCore config.plist which was only opened and edited with OCAT.

I did not open my clover config plist today at all. And if I do I open it, I use Clover Configurator.

Look at line 863 and following. It inserted an USB Patch by PM Heart, but then  the header of the actual plist follows and continues with OpenCore stuff with all the ACPI patches in OpenCore format. Really weird.

 

config_dead.plist

Edited October 14, 2021 by 5T33Z0

[ic005k]

@eSaF Please test the following to see. You need to be logged into Github to download this file.

https://github.com/ic005k/QtOpenCoreConfig/suites/4051835781/artifacts/102769317

@5T33Z0 Ok, received, I will analyze it. Thanks for the feedback.

[ic005k]

@eSaF Okay, I will follow up on this issue.

[ic005k]

9 minutes ago, eSaF said:

what byte size are we aiming for?

It is the file size displayed on the download page, such as 24.1M, etc.

https://github.com/ic005k/QtOpenCoreConfig/releases/tag/20211018

[ic005k]

@eSaF The new version has been released, please download the latest version manually, and then click "Download upgrade package" in the "Help" menu to see if it can be downloaded normally? Good luck.

[ic005k]

9 minutes ago, eSaF said:

Result from latest commit

It still doesn't seem to work, please copy the displayed text to a text editor and save it as a txt file to submit to the post, I'll analyze it.
Also, after closing the downloader interface, you can click "Download Upgrade Package" in the "Help" menu again to see if the result is the same.

[ic005k]

@eSaF Also, have you ever used a command line tool like aria2 to download a file? You can try to download this file directly using aria2. For example.

 

./aria2c https://download.fastgit.org/ic005k/QtOpenCoreConfig/releases/download/20211019/OCAT-Win64.zip

[ic005k]

44 minutes ago, eSaF said:

Hope you glean the needed info from this.

Please try the following again.

 

https://github.com/ic005k/QtOpenCoreConfig/suites/4070777015/artifacts/103502991

[Guest 5T33Z0]

 

Got notified about an update. But it doesn't apply after downloading.

[ic005k]

4 minutes ago, 5T33Z0 said:

But it doesn't apply after downloading.

Please download the following version, run the app and select "Download Upgrade Package" in the "Help" menu to see if it works.

https://github.com/ic005k/QtOpenCoreConfig/suites/4070777015/artifacts/103502991

@5T33Z0 There are currently some problems with the update download for users in some regions, and it is being debugged.

[Guest 5T33Z0]

4 minutes ago, ic005k said:

Please download the following version, run the app and select "Download Upgrade Package" in the "Help" menu to see if it works.

https://github.com/ic005k/QtOpenCoreConfig/suites/4070777015/artifacts/103502991

@5T33Z0 There are currently some problems with the update download for users in some regions, and it is being debugged.

 

Yes, this works. So shall I keep this version for now?

[ic005k]

2 minutes ago, 5T33Z0 said:

So shall I keep this version for now?

Please keep it, this is the next upgrade. Thanks for testing.

[Guest 5T33Z0]

The next version I got via Update feature doesn't work:

 

Spoiler

2021-10-16 10:46:23.443891 [INFO] [../../../src/Context.cc:179] <<--- --- --- ---

2021-10-16 10:46:23.444526 [INFO] [../../../src/Context.cc:180] --- --- --- ---

2021-10-16 10:46:23.444531 [INFO] [../../../src/Context.cc:181] --- --- --- --->>

2021-10-16 10:46:23.444536 [INFO] [../../../src/Context.cc:182] aria2 1.35.0

2021-10-16 10:46:23.444546 [INFO] [../../../src/Context.cc:183] Apple LLVM 11.0.0 (clang-1100.0.33.8)

built by x86_64-apple-darwin18.7.0

on Oct 6 2019 09:53:39

2021-10-16 10:46:23.444568 [INFO] [../../../src/Context.cc:184] Darwin 19.6.0 Darwin Kernel Version 19.6.0: Thu Sep 16 20:58:47 PDT 2021; root:xnu-6153.141.40.1~1/RELEASE_X86_64 x86_64

2021-10-16 10:46:23.444575 [INFO] [../../../src/Context.cc:185] zlib/1.2.11 expat/2.2.8 sqlite3/3.30.0 AppleTLS GMP/6.1.2 c-ares/1.15.0 libssh2/1.9.0

2021-10-16 10:46:23.444578 [INFO] [../../../src/Context.cc:186] Logging started.

2021-10-16 10:46:23.444584 [INFO] [../../../src/SocketCore.cc:1659] Checking configured addresses

2021-10-16 10:46:23.444847 [INFO] [../../../src/SocketCore.cc:1710] Not considered: 127.0.0.1

2021-10-16 10:46:23.444861 [INFO] [../../../src/SocketCore.cc:1710] Not considered: ::1

2021-10-16 10:46:23.444929 [INFO] [../../../src/SocketCore.cc:1710] Not considered: fe80::1%lo0

2021-10-16 10:46:23.444972 [INFO] [../../../src/SocketCore.cc:1710] Not considered: fe80::c23:7648:ff00:3ac8%en1

2021-10-16 10:46:23.444979 [INFO] [../../../src/SocketCore.cc:1707] Found configured address: 192.168.0.113

2021-10-16 10:46:23.445020 [INFO] [../../../src/SocketCore.cc:1710] Not considered: fe80::68f9:75ff:fe62:f091%awdl0

2021-10-16 10:46:23.445060 [INFO] [../../../src/SocketCore.cc:1710] Not considered: fe80::68f9:75ff:fe62:f091%llw0

2021-10-16 10:46:23.445101 [INFO] [../../../src/SocketCore.cc:1710] Not considered: fe80::474f:be95:f4ae:1b8b%utun0

2021-10-16 10:46:23.445141 [INFO] [../../../src/SocketCore.cc:1710] Not considered: fe80::1927:1590:b4bb:8355%utun1

2021-10-16 10:46:23.445145 [INFO] [../../../src/SocketCore.cc:1715] IPv4 configured=1, IPv6 configured=0

2021-10-16 10:46:23.445191 [NOTICE] [../../../src/Context.cc:311] Downloading 1 item(s)

 

10/16 10:46:23 [[1;32mNOTICE[0m] Downloading 1 item(s)

2021-10-16 10:46:23.445937 [INFO] [../../../src/AsyncNameResolverMan.cc:83] CUID#7 - Resolving hostname download.fastgit.org

 

2021-10-16 10:46:23.641143 [INFO] [../../../src/AbstractCommand.cc:817] CUID#7 - Name resolution complete: download.fastgit.org -> 104.21.36.252, 172.67.201.159

2021-10-16 10:46:23.641187 [INFO] [../../../src/HttpInitiateConnectionCommand.cc:123] CUID#7 - Connecting to 104.21.36.252:443

 

2021-10-16 10:46:23.772647 [INFO] [../../../src/AppleTLSSession.cc:754] AppleTLS: Connected to download.fastgit.org with TLSv1.2 (TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256)

2021-10-16 10:46:23.772765 [INFO] [../../../src/HttpConnection.cc:129] CUID#7 - Requesting:

GET /ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg HTTP/1.1

User-Agent: aria2/1.35.0

Accept: */*,application/metalink4+xml,application/metalink+xml

Host: download.fastgit.org

Want-Digest: SHA-512;q=1, SHA-256;q=1, SHA;q=0.1

 

 

 

2021-10-16 10:46:23.806288 [INFO] [../../../src/HttpConnection.cc:164] CUID#7 - Response received:

HTTP/1.1 301 Moved Permanently

Date: Sat, 16 Oct 2021 08:46:23 GMT

Content-Type: text/html; charset=utf-8

Transfer-Encoding: chunked

Connection: keep-alive

location: https://endpoint.fastgit.org/https://github.com/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

Cache-Control: max-age=14400

CF-Cache-Status: HIT

Age: 260

Expect-CT: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"

Report-To: {"endpoints":[{"url":"https:\/\/a.nel.cloudflare.com\/report\/v3?s=nAkix1KSMU%2BPP%2BUxzNV0FWX%2BvtinzNzcuOci2%2BK0hmMkJJibHkb1%2BsNU%2BfRjUzkdtJgxvZATT1YUril4NSiNyCfdVILX3cEZH6ZPrqAHZl%2BWclbT9Q1OBp%2BNlddyhK9n%2FnVSG%2Fk9wA%3D%3D"}],"group":"cf-nel","max_age":604800}

NEL: {"success_fraction":0,"report_to":"cf-nel","max_age":604800}

Strict-Transport-Security: max-age=31536000; preload

Server: cloudflare

CF-RAY: 69f004369ace178a-FRA

alt-svc: h3=":443"; ma=86400, h3-29=":443"; ma=86400, h3-28=":443"; ma=86400, h3-27=":443"; ma=86400

 

 

 

2021-10-16 10:46:23.810993 [INFO] [../../../src/DownloadEngine.cc:315] Pool socket for 104.21.36.252(443)

2021-10-16 10:46:23.811018 [NOTICE] [../../../src/HttpResponse.cc:169] CUID#7 - Redirecting to https://endpoint.fastgit.org/https://github.com/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

 

10/16 10:46:23 [[1;32mNOTICE[0m] CUID#7 - Redirecting to https://endpoint.fastgit.org/https://github.com/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

2021-10-16 10:46:23.811607 [INFO] [../../../src/AsyncNameResolverMan.cc:83] CUID#7 - Resolving hostname endpoint.fastgit.org

 

2021-10-16 10:46:23.853647 [INFO] [../../../src/AbstractCommand.cc:817] CUID#7 - Name resolution complete: endpoint.fastgit.org -> 104.21.36.252, 172.67.201.159

2021-10-16 10:46:23.853750 [INFO] [../../../src/DownloadEngine.cc:449] Found socket for 104.21.36.252(443)

 

2021-10-16 10:46:23.853848 [INFO] [../../../src/HttpConnection.cc:129] CUID#7 - Requesting:

GET /https://github.com/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg HTTP/1.1

User-Agent: aria2/1.35.0

Accept: */*,application/metalink4+xml,application/metalink+xml

Host: endpoint.fastgit.org

Want-Digest: SHA-512;q=1, SHA-256;q=1, SHA;q=0.1

 

 

 

2021-10-16 10:46:23.877472 [INFO] [../../../src/HttpConnection.cc:164] CUID#7 - Response received:

HTTP/1.1 403 Forbidden

Server: cloudflare

Date: Sat, 16 Oct 2021 08:46:23 GMT

Content-Type: text/html

Content-Length: 151

Connection: keep-alive

CF-RAY: 69f004371b63178a-FRA

 

 

2021-10-16 10:46:23.877832 [INFO] [../../../src/DownloadEngine.cc:315] Pool socket for 104.21.36.252(443)

2021-10-16 10:46:23.877890 [ERROR] [../../../src/AbstractCommand.cc:351] CUID#7 - Download aborted. URI=https://download.fastgit.org/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

Exception: [../../../src/AbstractCommand.cc:351] errorCode=22 URI=https://endpoint.fastgit.org/https://github.com/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

-> [../../../src/HttpSkipResponseCommand.cc:240] errorCode=22 The response status is not successful. status=403

 

10/16 10:46:23 [[1;31mERROR[0m] CUID#7 - Download aborted. URI=https://download.fastgit.org/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

Exception: [../../../src/AbstractCommand.cc:351] errorCode=22 URI=https://endpoint.fastgit.org/https://github.com/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

-> [../../../src/HttpSkipResponseCommand.cc:240] errorCode=22 The response status is not successful. status=403

2021-10-16 10:46:23.877928 [NOTICE] [../../../src/RequestGroupMan.cc:427] Download GID#e0c7dcb5258d6421 not complete:

 

10/16 10:46:23 [[1;32mNOTICE[0m] Download GID#e0c7dcb5258d6421 not complete:

 

Download Results:

gid |stat|avg speed |path/URI

======+====+===========+=======================================================

e0c7dc|ERR | 0B/s|https://download.fastgit.org/ic005k/QtOpenCoreConfig/releases/download/20211020/OCAT_Mac.dmg

 

Status Legend:

(ERR):error occurred.

 

aria2 will resume download if the transfer is restarted.

If there are any errors, then see the log file. See '-l' option in help/man page for details.

 

 

[ic005k]

35 minutes ago, 5T33Z0 said:

The next version I got via Update feature doesn't work

For now, please download the latest V20211020 manually and there will be no problem after that.

 

https://github.com/ic005k/QtOpenCoreConfig/releases/tag/20211020

@5T33Z0 Because there is a problem with the V20211019 update downloader you are using, you cannot update to V20211020 through it.

[ic005k]

@5T33Z0 To check if there is a problem with the current version of OCAT's update downloader, select "Download Update Packages" in the "Help" menu, if it works properly, there is no problem with OCAT's update downloader, otherwise please report the problem.