Jump to content
5539 posts in this topic

Recommended Posts

When your system isn’t busy or just before you go to bed run 4 full passes of memtestx86 and make sure your memory’s ok.

 

in the mean time though if you go into the config.plist and remove the bootargument agdpmod=pikera and try again as that is for Navi GPUs only and is not needed on the vega. If that don’t work and your not pushing all your cores past 4.7ghz then test that memory over night to make sure. 

  • Like 1
1 minute ago, AudioGod said:

When your system isn’t busy or just before you go to bed run 4 full passes of memtestx86 and make sure your memory’s ok.

 

in the mean time though if you go into the config.plist and remove the bootargument agdpmod=pikera and try again as that is for Navi GPUs only and is not needed on the vega. If that don’t work and your not pushing all your cores past 4.7ghz then test that memory over night to make sure. 

Thank you. Will do.

  • Like 1

One other boot argument that can sometimes cause abit of trouble but I didn’t notice it in your config is drm argument shikigva=80

I’ve heard story’s before about it causing glitching so if it’s there you can try removing it or turning it into the Vegas job by changing from 80 too 144.

 

hopefully one of them answers is the correct one. 
 

let me know how goes and good luck :thumbsup_anim:

Edited by AudioGod
  • Like 1
9 hours ago, texem said:

 

I'm running 10.14.6 "under" Catalina using Parallels Desktop 15 perfectly. It's not that GFX performance but it helps to get some 32bit apps keeping alive.

 

Oh, now that is a great idea! That way those few times I need those apps I can use them. Do you think I can create a virtual Mojave using VirtualBox?

3 hours ago, pkdesign said:

Oh, now that is a great idea! That way those few times I need those apps I can use them. Do you think I can create a virtual Mojave using VirtualBox?

 

Not that I think that Virtualbox would be a good candidate for a MacOS guest but are you saying that you got Virtualbox to work on your hackintosh? Windows throw BSOD when trying to install and Genymotion emulators do not boot! VMWare and Parallels working like a champ but I need Virtualbox for Genymotion and currently it is giving me the nerves!

Edited by WizeMan
2 hours ago, wdopulencia said:

Hi! I just bought a new drive and im planning to install windows on it. How do i install windows without potentially messing up my hackintosh?

In my case, I installed windows without any other disk, and bringed back hackintosh drive when I finish to install win, with hackintosh disk in top of the list in the bios. you should be ok. Safety first. 

 

I have just a question about OC and render. I am a 2d animator using a lot after effects render without any problem. I have 3 hours render often.  When I finished my project I started to use Premiere, It was the first time for me. I got some crash when I surf on the web with premier render. I consider until now it was like normal. I have to wait during render.  I dont know this software. In my case it crash when I retake (move mouse after 30 mins). Its just to know How did you render with. I will try to memtest this night. I am in 4.7 ghz.

Edited by hansik
9 hours ago, WizeMan said:

 

Not that I think that Virtualbox would be a good candidate for a MacOS guest but are you saying that you got Virtualbox to work on your hackintosh? Windows throw BSOD when trying to install and Genymotion emulators do not boot! VMWare and Parallels working like a champ but I need Virtualbox for Genymotion and currently it is giving me the nerves!

Oh yes. I've got an Ubuntu WM and a Windows 10 VM running smoothly.

 

EDIT: Oh dang! I thought I had Win 10 working but it BSOD as well. Ubuntu now reboots. I promise I had these working before! :shock:

 

More to track down!

Edited by pkdesign
  • Sad 1

Does facetime and imessage always work for you ? This is not the case for me. I tried a method with smbios and rt variable to fix it, but it doesnt work https://imgur.com/a/7eK6I7M, it tells me to add an address but i already did ...

Edited by hansik
9 minutes ago, hansik said:

Does facetime and imessage always work for you ? This is not the case for me. I tried a method with smbios and rt variable to fix it, but it doesnt work https://imgur.com/a/7eK6I7M, it tells me to add an address but i already did ...

Do you have a WiFi/Bluetooth combo card in there?

thats what you need and yes all iCloud services are fully working for everybody on here pal.

4 minutes ago, AudioGod said:

Do you have a WiFi/Bluetooth combo card in there?

thats what you need and yes all iCloud services are fully working for everybody on here pal.


No only ethernet ! okok It seems to be not sell anymore.

Edited by hansik
1 minute ago, hansik said:


No only ethernet !

There you go then buddy.

you can still force it to work on ethernet but I wouldn’t advise it.

you can find the way to do it over on the site with a red Apple.

18 minutes ago, AudioGod said:

Do you have a WiFi/Bluetooth combo card in there?

thats what you need and yes all iCloud services are fully working for everybody on here pal.

Hold up, I do not have any wifi on my rig, just a Asus BT400 USB and my Messages and Facetime work.

27 minutes ago, pkdesign said:

Hold up, I do not have any wifi on my rig, just a Asus BT400 USB and my Messages and Facetime work.

But Does it work without the BT dongle plugged in?

 

i used to do it myself but I had to patch clover to get it work and force ethernet.

you sure you didn’t do that back in the glasgood days?

it was him that showed me :) 

Edited by AudioGod
1 hour ago, AudioGod said:

But Does it work without the BT dongle plugged in?

 

i used to do it myself but I had to patch clover to get it work and force ethernet.

you sure you didn’t do that back in the glasgood days?

it was him that showed me :) 


TBH I had iMessage and FaceTime working before I get the Fenvi, just with Ethernet. Only thing I did was have RT variable my MAC address and my MLB (SN+5 chars) as a value on Clover.(I started cheating on Clover with that s3xy Russian OC after I got the Fenvi)

  • Like 1
55 minutes ago, WizeMan said:


TBH I had iMessage and FaceTime working before I get the Fenvi, just with Ethernet. Only thing I did was have RT variable my MAC address and my MLB (SN+5 chars) as a value on Clover.(I started cheating on Clover with that s3xy Russian OC after I got the Fenvi)


oh {censored} yeah your right I remember now. +5 chars 
Hhhmmmmmm let me see, test bench time!

Edited by AudioGod

Just tested it. Shut down, pulled the BT400, restarted and tried Messages and Facetime. Both work. And I'm still on Mojave BTW.

 

A while back there was an issue when Ethernet was not seen as internal. All Clover configs have this set to be internal as default now LANInjection = YES (or true).

Edited by pkdesign
  • Like 1
37 minutes ago, pkdesign said:

Just tested it. Shut down, pulled the BT400, restarted and tried Messages and Facetime. Both work. And I'm still on Mojave BTW.

 

A while back there was an issue when Ethernet was not seen as internal. All Clover configs have this set to be internal as default now LANInjection = YES (or true).


yep confirmed it works straight away with Mojave but not Catalina I’m a bit baffled. That’s a strange one.

 

Update - ok here we go flipped back to my cat test ssd and magically iMessage started working too....lol ffs I give up forever lololol

its got a mind of its own over here. I did absolutely nothing other then flip disks over and sign back in.

stupid thing...lol

Edited by AudioGod

Any way to disable the native wifi/BT on the board thru OC? I’d like to use it in W10 but obviously not in macOS. Would be a pain to have to go into the BIOS every time and enable/disable the card.

1 minute ago, Tiem said:

Any way to disable the native wifi/BT on the board thru OC? I’d like to use it in W10 but obviously not in macOS. Would be a pain to have to go into the BIOS every time and enable/disable the card.

You could create a ssdt to block it off from macOS I guess or thinking about it you could block it in the device properties in the config possibly?

 

  • Thanks 1
×
×
  • Create New...