Jump to content
5539 posts in this topic

Recommended Posts

3 minutes ago, wdopulencia said:

Hey! When I turned my pc on, it suddenly just boots to windows and bypassing clover i think? How do i fix this? Thanks!

Go into the bios and make sure your drive containing macOS is selected as your boot drive.

failing that use a USB key to boot up and check the Efi isn’t corrupt on your end. 

On 3/3/2020 at 10:00 AM, AudioGod said:

do you have a link you could share on how to unlock for this guy please bro?

it's written here f.i. :

 

https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/extras/msr-lock

 

 

  • Thanks 1
7 minutes ago, AudioGod said:

Go into the bios and make sure your drive containing macOS is selected as your boot drive.

failing that use a USB key to boot up and check the Efi isn’t corrupt on your end. 

I made the boot option #1 the drive with macOS however still unable to boot to macOS.

Just now, wdopulencia said:

I made the boot option #1 the drive with macOS however still unable to boot to macOS.

Use your USB key and boot in and check to see what you did wrong in that case.

9 minutes ago, AudioGod said:

Go into the bios and make sure your drive containing macOS is selected as your boot drive.

failing that use a USB key to boot up and check the Efi isn’t corrupt on your end. 

I made the boot option #1 the drive with macOS however still unable to boot to macOS.

8 minutes ago, eSaF said:

 

Silly question I know but when you make OS X Drive the first boot drive are you saving the setting before rebooting?

Yes I did just a while ago. Then after failing to boot again to macos, i tried to check the boot settings and then found out that the drive is not showing up. What do i do?

1 hour ago, AudioGod said:

They are the correct bios settings but won’t give you a unlocked MSR. Google search it on how as I’m not near my computer now to send you a link.

you can upgrade to Catalina with no problems at all. :thumbsup_anim:

 

@WizeMan do you have a link you could share on how to unlock for this guy please bro?

 

https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/extras/msr-lock

 

Two notes though:

- It is recommended to use setup_var_3 instead of setup_var (although I haven't seen any differences on my Pro board)

- @herodes you have nothing mention worthy to gain, and if you do not have at least basic experience on using shells or the tools mentioned in the guide, I suggest you keep it locked. 

Edited by WizeMan
  • Like 2

Hi all,

 

Very strange! After few mounts happy living with my hackintosh i cannot boot anymore.

ERROR allocationg 0x11987 pages at 0x00000000078a8000 alloc type 2

Couldn't allocate runtime area

Boot failed....

 

Reinstalled the BIOS, CFG Unlock but no luck for now. (Tried OC and Clovier, boot is mission imposible)

10 minutes ago, stangen said:

Hi all,

 

Very strange! After few mounts happy living with my hackintosh i cannot boot anymore.

ERROR allocationg 0x11987 pages at 0x00000000078a8000 alloc type 2

Couldn't allocate runtime area

Boot failed....

 

Reinstalled the BIOS, CFG Unlock but no luck for now. (Tried OC and Clovier, boot is mission imposible)

 

Remove all power from the system and then remove the battery from the motherboard for a few minutes, put it all back together and load back in your bios profile and it should work fine from there.

  • Thanks 1
9 hours ago, texem said:

 

correct, it's worth giving it a try. You need only a SSDT modified for RP21 if seated in the lower x16 slot .

 

 

 

After I get the system totally configured and transfer my data, I'll have to look into how to edit DSDT and SSDT. My last Hackintosh build didn't require me to delve into these subjects, so I was happy to remain blissfully ignorant.

 

thanks again!

 

3 hours ago, Project 2501 said:

 

After I get the system totally configured and transfer my data, I'll have to look into how to edit DSDT and SSDT. My last Hackintosh build didn't require me to delve into these subjects, so I was happy to remain blissfully ignorant.

 

thanks again!

 

 

if you go for OpenCore, then drop me a line if you like copy of my TB SSDT .

You don't need to patch your ACPI (DSDT) , it's already here .  We also provide a DSDT-free "SSDT only" OpenCore config.

14 hours ago, texem said:

 

if you go for OpenCore, then drop me a line if you like copy of my TB SSDT .

You don't need to patch your ACPI (DSDT) , it's already here .  We also provide a DSDT-free "SSDT only" OpenCore config.

SSDT is a non-sense way for incomplete solution

check apple tables, dsdt from iMac19,1 serie 300 have 8k lines, our dsdt serie 300 have 50k+(many trash), is impossible a perfect way with ssdt

  • Like 1
5 minutes ago, wdopulencia said:

Hey I encountered this problem during boot. What do i do? Thanks. 

AD30F203-B2FD-4B4E-B533-AFEA61BE76F8.jpeg


Remove all power from the system and then remove the battery from the motherboard for a few minutes, put it all back together and load back in your bios profile and it should work fine from there.

Very strange. i updated latest f12d BIOS again (just to make sure everything is cleared.). After restart, i made the listed settings in page 1 into the  BIOS, Loaded the system default and restarted computer again. After that I came into the BIOS again and installed CFG_Unlock as discribed and first boot into MacOS was successful. Removed the KernelPM and rebooted. After restart MacOS was unable to boot again. If I disable the internal video everything is working. But with enabled video ...no luck so far. Maybe I doing somethingh wrong, but have no idea where mistaken.

 

P.S. Sorry for my bad English. 

20 minutes ago, stangen said:

Very strange. i updated latest f12d BIOS again (just to make sure everything is cleared.). After restart, i made the listed settings in page 1 into the  BIOS, Loaded the system default and restarted computer again. After that I came into the BIOS again and installed CFG_Unlock as discribed and first boot into MacOS was successful. Removed the KernelPM and rebooted. After restart MacOS was unable to boot again. If I disable the internal video everything is working. But with enabled video ...no luck so far. Maybe I doing somethingh wrong, but have no idea where mistaken.

 

P.S. Sorry for my bad English. 

Try doing what I described in the previous post. It should resolve it for you.

54 minutes ago, stangen said:

It’s worked until first restart. After that same story. MacOS refuse to boot.

 

If you boot with -v is its saying something about unable to allocate memory ? if so its a common issue most of us have suffered at one point or another..

 

Are you using clover? Try updating OcQuirks to latest version (goes in EFI/CLOVER/Drivers)

 

https://github.com/ReddestDream/OcQuirks/releases/tag/19

 

any change the plist to be 

 

DevirtualiseMmio = true or yes or 1 (depends on your plist editor)

ProtectUefiServices =  true or yes or 1 (depends on your plist editor)

 

Similar if your using OC, get the latest version of 057 and enabled these 2 keys to be true as well.

 

Might just fix this problem .... If its not this error then booting with -v will show a better error than just no entry sign.

 

 

Edited by Cass67
  • Thanks 1

Hello Friends,

 

Is anybody have an issue with USB ports? I mean all USB ports have no response (randomly happening) keyboard, mouse, midi-controller all at ones. But you can put to sleep your PC via power button on the case. All works fine but without USB ports and need to use reset button for reboot. 

32 minutes ago, velopitex said:

Hello Friends,

 

Is anybody have an issue with USB ports? I mean all USB ports have no response (randomly happening) keyboard, mouse, midi-controller all at ones. But you can put to sleep your PC via power button on the case. All works fine but without USB ports and need to use reset button for reboot. 

Never heard of that one before bud, is it happening randomly or is there a process that sets it off?

clover or Oc?

Edited by AudioGod
×
×
  • Create New...