[Guide] Catalina / BigSur / Monterey on mobos Serie 100 / 200 / 300 / 400 / 500 / 600 SkyLake / KabyLake / CoffeeLake / CometLake / RocketLake / AlderLake DSDT

[tarbax]

2 hours ago, MaLd0n said:

clear nvram with f11 key in clover boot screen

Pressed f11 in clover it reboots and gives the same error again

[MaLd0n]

1 hour ago, tarbax said:

Pressed f11 in clover it reboots and gives the same error again

what u change in bios/uefi setup?

 

use in default, just enable intelHD for intel quick sync, nothing more

[kai19879]

20 hours ago, MaLd0n said:

1- Replace Full Clover Folder
2- Install Clover again with correct options
3- Reboot
4- Extract new Send_me

CLOVER.zip
Last Clover Version UEFI

 

enable intelHD in bios/uefi

when I select enable, clover does not load and goes into reboot.

When sel auto it's good, but itunes whatever dont show film.

And i can't find airplay.

Does not wake up from sleep.

Send me iMac-admin.zip

Edited April 22, 2019 by kai19879

[tarbax]

On 4/22/2019 at 7:00 PM, MaLd0n said:

what u change in bios/uefi setup?

 

use in default, just enable intelHD for intel quick sync, nothing more

This is what I now get:

[kai19879]

Hi @MaLd0n, can you help with my question?
sorry for bothering you.

 

[MaLd0n]

1 hour ago, kai19879 said:

Hi @MaLd0n, can you help with my question?
sorry for bothering you.

 

u have a last bios/uefi version?

[kai19879]

2 minutes ago, MaLd0n said:

u have a last bios/uefi version?

Yes. Ga z270-hd3 bios v. f9d 09/03/2018

[MaLd0n]

4 minutes ago, kai19879 said:

Yes. Ga z270-hd3 bios v. f9d 09/03/2018

remove edited dsdt, reboot, enable intelhd, extract new send_me

[kai19879]

17 minutes ago, MaLd0n said:

remove edited dsdt, reboot, enable intelhd, extract new send_me

Send me iMac-admin.zip

dsdt in efi removed.

if i select enable in internal graphics ENABLE pc reboots before boot clover. if i select auto as in the screenshot earlier pc boot normal.

 

[MaLd0n]

17 minutes ago, kai19879 said:

Send me iMac-admin.zip

dsdt in efi removed.

if i select enable in internal graphics ENABLE pc reboots before boot clover. if i select auto as in the screenshot earlier pc boot normal.

 

DSDT.aml.zip

[kai19879]

9 minutes ago, MaLd0n said:

DSDT.aml.zip

Thank you, but itunes stiil not show films.
And VDADecoderChecker show

Last login: Sat Apr 27 00:18:38 on ttys001

iMac-admin:~ admin$ /Users/admin/Downloads/VDADecoderChecker ; exit;

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.

VDADecoderCreate failed. err: -12473

logout

Saving session...

...copying shared history...

...saving history...truncating history files...

...completed.

[MaLd0n]

26 minutes ago, kai19879 said:

Thank you, but itunes stiil not show films.
And VDADecoderChecker show

Last login: Sat Apr 27 00:18:38 on ttys001

iMac-admin:~ admin$ /Users/admin/Downloads/VDADecoderChecker ; exit;

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.

VDADecoderCreate failed. err: -12473

logout

Saving session...

...copying shared history...

...saving history...truncating history files...

...completed.

without igpu u need check other way

[kai19879]

14 hours ago, MaLd0n said:

without igpu u need check other way

Hi! I enable intel hd graphics. To do this, I reinstalled the clover and transferred to it the files you gave me (drivers, kext, config.plist) then restart with enabled graphics stopped

but itunes still not work.  Do you have ideas?

 

screenshots.zip

Send me iMac-admin.zip

[MaLd0n]

3 minutes ago, kai19879 said:

Hi! I enable intel hd graphics. To do this, I reinstalled the clover and transferred to it the files you gave me (drivers, kext, config.plist) then restart with enabled graphics stopped

but itunes still not work.  Do you have ideas?

 

screenshots.zip

Send me iMac-admin.zip

remove intelgfx, ig-platform-id and injectintel, let the bootloader and kexts work

[kai19879]

1 hour ago, MaLd0n said:

remove intelgfx, ig-platform-id and injectintel, let the bootloader and kexts work

it's not work 

Last login: Sat Apr 27 16:01:47 on console

iMac-admin:~ admin$ /Users/admin/Downloads/VDADecoderChecker ; exit;

GVA error: Not detecting IGPU in IORegistry!

GVA error: Not detecting valid offline codec!

AVDCreateGPUAccelerator: Error loading GPU renderer

VDADecoderCreate failed. err: -12473

An error was returned by the decoder layer. This may happen for example because of bitstream/data errors during a decode operation. This error may also be returned from VDADecoderCreate when hardware decoder resources are available on the system but currently in use by another process.

VDADecoderCreate failed. err: -12473

logout

Saving session...

...copying shared history...

...saving history...truncating history files...

...completed.

 

 

i recover ntelgfx, ig-platform-id and injectintel and converter work fine but not itunes.

airplay work, i connected monitor across hdmi

Edited April 27, 2019 by kai19879

[kai19879]

@MaLd0n 

how i can fix sleep and wake up?

Now the computer goes to sleep, turns off and can not Wake up, while it does not turn off and does not start boot.  It can spend hours to work.

Thank you.

[ShanerWarner]

@MaLd0n This is my PC Specifications...

intel Core i7 6700K Skylake.
MSI Z170A Gaming M5 Motherboard.
MSI GTX 1080 Gaming X GPU. (want to get this to work)

 

Currently, I am on High Sierra 10.3.6 Build 17G2208.

 

Everything is working fine except for the nVidia GPU as I can't install the driver due to the Build version not being supported.

 

Also, I have attached my Files if you could please take a look at the DSDT

Send me Shanes-iMac.zip

[MaLd0n]

4 hours ago, ShanerWarner said:

@MaLd0n This is my PC Specifications...

intel Core i7 6700K Skylake.
MSI Z170A Gaming M5 Motherboard.
MSI GTX 1080 Gaming X GPU. (want to get this to work)

 

Currently, I am on High Sierra 10.3.6 Build 17G2208.

 

Everything is working fine except for the nVidia GPU as I can't install the driver due to the Build version not being supported.

 

Also, I have attached my Files if you could please take a look at the DSDT

Send me Shanes-iMac.zip

DSDT.aml.zip

run it

https://olarila.com/files/Utils/nvidia-update.command.zip

and it

https://olarila.com/files/Utils/RepairPermissions.zip

[ShanerWarner]

6 hours ago, MaLd0n said:

DSDT.aml.zip

run it

https://olarila.com/files/Utils/nvidia-update.command.zip

and it

https://olarila.com/files/Utils/RepairPermissions.zip

 

@MaLd0n Thanks a ton for the DSDT, everything seems to be working ok now, USB/Nvidia graphics.

 

I wanted to know in the DSDT that you rectified, there is just one error that pops up upon compilation. I would like to know what that is, if it would affect the performance.

 

I've highlighted the line.

 

[MaLd0n]

10 hours ago, ShanerWarner said:

 

@MaLd0n Thanks a ton for the DSDT, everything seems to be working ok now, USB/Nvidia graphics.

 

I wanted to know in the DSDT that you rectified, there is just one error that pops up upon compilation. I would like to know what that is, if it would affect the performance.

 

I've highlighted the line.

https://github.com/acidanthera/MaciASL

[steve3d]

hi @MaLd0n, I've changed my config, old dsdt will not boot, so would you please help me create a new patched dsdt?

Send me yinjiangs-iMac.myhome.cn.zip

[MaLd0n]

2 hours ago, steve3d said:

hi @MaLd0n, I've changed my config, old dsdt will not boot, so would you please help me create a new patched dsdt?

Send me yinjiangs-iMac.myhome.cn.zip

DSDT.aml.zip

[steve3d]

48 minutes ago, MaLd0n said:

DSDT.aml.zip

thanks for quick reply, but with this dsdt, I'm getting a lot of errors, then system reboots. how can I get these errors back to you?

[MaLd0n]

1 hour ago, steve3d said:

thanks for quick reply, but with this dsdt, I'm getting a lot of errors, then system reboots. how can I get these errors back to you?

u need use a correct clover folder

https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip

[steve3d]

        Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
        {
            Debug = "Writing plugin-type to Registry!"
            If ((Arg2 == Zero))
            {
                Return (Buffer (One)
                {
                     0x03                                             // .
                })
            }

            Return (Package (0x02)
            {
                "plugin-type", 
                One
            })
        }

hi, MaLd0n, your dsdt have this plugin type = 1 enabled, but with this, my system just keeps rebooting at apple logo screen, after I removed these part, the error message is different, it told me that cpu has something wrong.