MaLd0n Posted July 3, 2018 Author Share Posted July 3, 2018 On 7/2/2018 at 7:31 AM, msbc said: My bad. Extracted and new Send Me created. Thank you Sir. Send me MSCHack.zip CLOVER.zip send me new files SEND_ME use my updated app RunMe.app 7 hours ago, hackaro said: No, I don’t disable igfx usually as for iMac 18,3 sysdef remove DSDT, update ur bos for last version and run my app again RunMe.app 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2623967 Share on other sites More sharing options...
eddiec Posted July 3, 2018 Share Posted July 3, 2018 (edited) Hi, your guide is the best! I couldn't install high sierra on my machine using any other. However I have trouble with sleep and shutdown, both result in reboot. Here are the files you need, I hope I got the right ones. Thanks so much! DumpLog.txt Send me Walters-iMac.zip Asus Z270 TUF Mark I, i7700k, EVGA GeForce GTX 980, WD Black M.2 Edited July 3, 2018 by eddiec Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2623980 Share on other sites More sharing options...
MaLd0n Posted July 3, 2018 Author Share Posted July 3, 2018 35 minutes ago, eddiec said: Hi, your guide is the best! I couldn't install high sierra on my machine using any other. However I have trouble with sleep and shutdown, both result in reboot. Here are the files you need, I hope I got the right ones. Thanks so much! DumpLog.txt Send me Walters-iMac.zip Asus Z270 TUF Mark I, i7700k, EVGA GeForce GTX 980, WD Black M.2 CLOVER.zip send me new dump after reboot, use all ur hackintosh kexts in clover/kexts/other, i put all u need there 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2623991 Share on other sites More sharing options...
eddiec Posted July 3, 2018 Share Posted July 3, 2018 Hi, thanks for the quick response. Here's the new dump. DumpLog.txt Send me Walters-iMac.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624020 Share on other sites More sharing options...
MaLd0n Posted July 3, 2018 Author Share Posted July 3, 2018 18 minutes ago, eddiec said: Hi, thanks for the quick response. Here's the new dump. DumpLog.txt Send me Walters-iMac.zip DSDT.02.zip remove GenericUSBXHCI 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624023 Share on other sites More sharing options...
eddiec Posted July 3, 2018 Share Posted July 3, 2018 (edited) Wow, removing GenericUSBXHCI seems to have fixed it Now sleep and shutdown apparently work. Thanks so much! I'll make sure to donate! Edited July 3, 2018 by eddiec Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624031 Share on other sites More sharing options...
MaLd0n Posted July 3, 2018 Author Share Posted July 3, 2018 19 minutes ago, eddiec said: Wow, removing GenericUSBXHCI seems to have fixed it Now sleep and shutdown apparently work. Thanks so much! I'll make sure to donate! this usb is native, just need a little patches for a good work Mojave BETA 3 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624037 Share on other sites More sharing options...
farfour78lb Posted July 3, 2018 Share Posted July 3, 2018 hi MaLd0n I am having trouble with the USB port limit and the audio codec I appreciate your help thanks Send me Fs-MBP.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624051 Share on other sites More sharing options...
MaLd0n Posted July 3, 2018 Author Share Posted July 3, 2018 30 minutes ago, farfour78lb said: hi MaLd0n I am having trouble with the USB port limit and the audio codec I appreciate your help thanks Send me Fs-MBP.zip Arquivo Comprimido.zip REMOVE FakePCIID_XHCIMux.kext 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624060 Share on other sites More sharing options...
msbc Posted July 4, 2018 Share Posted July 4, 2018 18 hours ago, MaLd0n said: CLOVER.zip send me new files SEND_ME use my updated app RunMe.app remove DSDT, update ur bos for last version and run my app again RunMe.app I compared you're updated config.plist to mine and one of the main differences is changing SMBIOS from iMac18,3 to iMacPro1,1. Can I check with you is this is really important to change for my hardware? Because, I have many Software licences that depend on machine-id/serial number which would have to be de-activated/activated again. Thanks for your consideration. Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624107 Share on other sites More sharing options...
MaLd0n Posted July 4, 2018 Author Share Posted July 4, 2018 4 hours ago, msbc said: I compared you're updated config.plist to mine and one of the main differences is changing SMBIOS from iMac18,3 to iMacPro1,1. Can I check with you is this is really important to change for my hardware? Because, I have many Software licences that depend on machine-id/serial number which would have to be de-activated/activated again. Thanks for your consideration. if u need a machine id, don't change it 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624152 Share on other sites More sharing options...
farfour78lb Posted July 4, 2018 Share Posted July 4, 2018 15 hours ago, MaLd0n said: Arquivo Comprimido.zip REMOVE FakePCIID_XHCIMux.kext Thank you so much Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624167 Share on other sites More sharing options...
hackaro Posted July 4, 2018 Share Posted July 4, 2018 On 7/3/2018 at 4:12 PM, MaLd0n said: remove DSDT, update ur bos for last version and run my app again RunMe.app Here it's again. We start from scratch: this is (and was, already) last bios version, with my ssdt's. Send me Napos-iMac.zip On 7/3/2018 at 3:45 PM, telepati said: Did you try to boot without DSDT? It can be the sound issue. I had the same verbose screen and at that time I had two problems one is DSDT other is Sound. I can boot without DSDT but with DSDT never. But when I add new layout-id for sound this time my sound back and I am starting boot with the same DSDT. Note; I didn't make any changes on DSDT. yes, sure is the DSDT. But as it's DSDT's Mald0n provided me, it was necessary to collect infos he requires... Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624180 Share on other sites More sharing options...
MaLd0n Posted July 4, 2018 Author Share Posted July 4, 2018 1 hour ago, hackaro said: Here it's again. We start from scratch: this is (and was, already) last bios version, with my ssdt's. Send me Napos-iMac.zip yes, sure is the DSDT. But as it's DSDT's Mald0n provided me, it was necessary to collect infos he requires... u need use my full clover folder without any ssdt CLOVER.zip new SEND_ME after reboot for apply TB patches 2 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624192 Share on other sites More sharing options...
hackaro Posted July 4, 2018 Share Posted July 4, 2018 2 hours ago, MaLd0n said: u need use my full clover folder without any ssdt CLOVER.zip new SEND_ME after reboot for apply TB patches this is what happens with your CLOVER ... Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624227 Share on other sites More sharing options...
telepati Posted July 4, 2018 Share Posted July 4, 2018 @MaLd0n is there any DSDT patch for the transparent issue? Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624255 Share on other sites More sharing options...
MaLd0n Posted July 4, 2018 Author Share Posted July 4, 2018 3 hours ago, hackaro said: this is what happens with your CLOVER ... no idea, use ur old files 19 minutes ago, telepati said: @MaLd0n is there any DSDT patch for the transparent issue? just activate ur GPU 2 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624260 Share on other sites More sharing options...
hackaro Posted July 5, 2018 Share Posted July 5, 2018 @MaLd0n what DSDT did you send me with your Clover folder? Is is that provided from ACPI origin folder? Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624310 Share on other sites More sharing options...
MaLd0n Posted July 5, 2018 Author Share Posted July 5, 2018 i think yes, don't remember, many every day 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624345 Share on other sites More sharing options...
MaLd0n Posted July 5, 2018 Author Share Posted July 5, 2018 MOJAVE BETA 3 3 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624351 Share on other sites More sharing options...
zzmadd Posted July 5, 2018 Share Posted July 5, 2018 (edited) Hi Master, I'm struggling at properly running a Gigabyte B360N with Intel i3-8100 using iGPU I've set the Bios, created the Installer, Installed the system and up to here all good. Then I have these issues: - iGPU works but not acceleration. I have ig-platform-id se to 0x59120000. Under IntelGFX 0x3E928086. I have installed FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext but also tried without those but still iGPU acceleration doesn't work. I get Intel UHD Graphics 630 7 MB and some artifacts. - Audio device is missing and it is Realtek ALC887. I added the KextToPatch suggested by Toleda com.apple.driver.AppleHDAController Find 3D70A1 Replace 3D48A3 but still Audio device is not seen - Sleep has issues - Ethernet is fine I added a Run me Send me.zip Edited July 5, 2018 by zzmadd Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624382 Share on other sites More sharing options...
hackaro Posted July 5, 2018 Share Posted July 5, 2018 3 hours ago, MaLd0n said: i think yes, don't remember, many every day Okay tomorrow I will resend you everything: there is a new BIOS Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624386 Share on other sites More sharing options...
ygtaldmr Posted July 5, 2018 Share Posted July 5, 2018 Dear MaLd0n, Can you please sort my clover please. Thank you very much. Send me iMac-Pro.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624392 Share on other sites More sharing options...
leVel Posted July 5, 2018 Share Posted July 5, 2018 (edited) Hello @MaLd0n I'm an idiot and i've mucked up my hack configuration since you last helped with my config. I'm now suffering from random crashes as well as sleep/wake issues. I went ahead and made a contribution to your beer campaign. Build: CPU: 8700k Mobo: Asrock z370m-ITX Fatal1ty Ram: 32gb (2x16gb) GPU: Sapphire RX 580 Nitro+ 8GB Many thanks for your continued support, leVel Edited July 30, 2018 by leVel Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624396 Share on other sites More sharing options...
MaLd0n Posted July 5, 2018 Author Share Posted July 5, 2018 54 minutes ago, leVel said: Hello @MaLd0n I'm an idiot and i've mucked up my hack configuration since you last helped with my config. I'm now suffering from random crashes as well as sleep/wake issues. I went ahead and made a contribution to your beer campaign. Build: CPU: 8700k Mobo: Asrock z370m-ITX Fatal1ty Ram: 32gb (2x16gb) GPU: Sapphire RX 580 Nitro+ 8GB Many thanks for your continued support, leVel Send me HackPro.lan.zip HERE WE GO CLOVER.zip 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/140/#findComment-2624403 Share on other sites More sharing options...
Recommended Posts