MacPeet Posted December 2, 2017 Share Posted December 2, 2017 @idris iqbal try this with layoutID 11 (0B) trial_ALC255_layoutID11.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2542871 Share on other sites More sharing options...
idris iqbal Posted December 2, 2017 Share Posted December 2, 2017 @idris iqbal try this with layoutID 11 (0B) trial_ALC255_layoutID11.zip Sorry @macpeet I'm late to replay your message thankyou so much for your help I'll try and report you later Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2542976 Share on other sites More sharing options...
idris iqbal Posted December 2, 2017 Share Posted December 2, 2017 @idris iqbal try this with layoutID 11 (0B) trial_ALC255_layoutID11.zip Hi @MacPeet I have try your AppleALC and Lilu kext with layout id 11 In & out speaker and internal mic work perfectly but Im still have problem with headphone or headset, the sound is abnormal I'm very apreciate for your help thank you before I attached my debug from my system2 debug_5925.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2543000 Share on other sites More sharing options...
vit9696 Posted December 4, 2017 Author Share Posted December 4, 2017 ALC269 - BRIX, layout-id: 1 ALC283 - NUC/BRIX, layout-id: 1 Both patch out ALC262 Thanks. Hi, the situation with the resources is that they change the masked codec for the already present ones. Current AppleALC assumption is that the patches are unified for the codec, and thus all the resources mask the same codec. Could you please explain why masking to 262 is better than 1984 (which is currently used). Depending on the reasons we may go with: - changing your codec to 1984 - changing other resources to 262 - modifying applealc to support different patches per layout (possible, but I need to be convinced that it is actually necessary). 2 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2543941 Share on other sites More sharing options...
MacPeet Posted December 4, 2017 Share Posted December 4, 2017 @idris iqbal try this: trial_ALC255_layoutID11_v2.zip This codec is almost identical to LayoutID 3 from @Mirone. Your codec_dump is actually logical and I have no other ideas. Your headphone jack is a combination jack, probably causing interference. Try other headphones! Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2544067 Share on other sites More sharing options...
idris iqbal Posted December 4, 2017 Share Posted December 4, 2017 @idris iqbal try this: trial_ALC255_layoutID11_v2.zip This codec is almost identical to LayoutID 3 from @Mirone. Your codec_dump is actually logical and I have no other ideas. Your headphone jack is a combination jack, probably causing interference. Try other headphones! Thank you @macpeetI'll try this one and hope this work I've try with another headphone before and I have got same problem I'm very appreciate for your help Thank you so much I'll report you later Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2544074 Share on other sites More sharing options...
toleda Posted December 7, 2017 Share Posted December 7, 2017 Could you please explain why masking to 262 is better than 1984 (which is currently used). Better results with 262, i.e., very stable, never experienced one channel working, other not. No need to make any changes to AppleALC. 2 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2545411 Share on other sites More sharing options...
MARZILLO Posted December 7, 2017 Share Posted December 7, 2017 hallo no new for conexant? hallo no new for conexant cx20632 ??? thanks codec_dump.txt 2.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2545913 Share on other sites More sharing options...
vandroiy2012 Posted December 7, 2017 Share Posted December 7, 2017 Better results with 262, i.e., very stable, never experienced one channel working, other not. No need to make any changes to AppleALC. Alright, could you please tell us all the patches we should use in this case? Now we have this patches in ALC283 info.plist: 1 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2545921 Share on other sites More sharing options...
Jademalo Posted December 8, 2017 Share Posted December 8, 2017 Dell Inspiron 5578 ALC3253 28 10.13.2 The issue I'm having is very strange, and I'm not quite sure how to describe it. The internal speakers are absolutely perfect, however the headphone port seems to be out of phase. Setting the fader to the left channel plays exclusively left, but it comes out of both channels. Setting the fader to the right channel plays exclusively right, but comes out of both channels. Setting the fader to the middle however seems to cancel any audio that's present in both channels. Centred vocals for example immediately disappear, and you can only really hear things that are only present in only one channel in the recording. I'm not exactly sure how to approach this. The laptop definitely uses ALC3253, and the wiki for AppleALC says to use layout 28. Any advice? Thanks in advance! Info.plist.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2546470 Share on other sites More sharing options...
toleda Posted December 8, 2017 Share Posted December 8, 2017 Now we have this patches in ALC283 info.plist: All correct, Thanks. Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2546746 Share on other sites More sharing options...
vusun123 Posted December 10, 2017 Share Posted December 10, 2017 Dell Inspiron 5578 ALC3253 28 10.13.2 The issue I'm having is very strange, and I'm not quite sure how to describe it. The internal speakers are absolutely perfect, however the headphone port seems to be out of phase. Setting the fader to the left channel plays exclusively left, but it comes out of both channels. Setting the fader to the right channel plays exclusively right, but comes out of both channels. Setting the fader to the middle however seems to cancel any audio that's present in both channels. Centred vocals for example immediately disappear, and you can only really hear things that are only present in only one channel in the recording. I'm not exactly sure how to approach this. The laptop definitely uses ALC3253, and the wiki for AppleALC says to use layout 28. Any advice? Thanks in advance! Install Rehabman's CodecCommander.kext Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2547757 Share on other sites More sharing options...
Jademalo Posted December 10, 2017 Share Posted December 10, 2017 Install Rehabman's CodecCommander.kext CodecCommander is installed and I'm still having this error. I've actually had CC installed since the very start, since it fixes my issue with no sound after sleep. Out of curiosity I tried a boot without CodecCommander, and I still had the same out of phase issue, so regardless of CodecCommander I am having this issue. Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2547779 Share on other sites More sharing options...
pretlord Posted December 10, 2017 Share Posted December 10, 2017 alc665 on sandy bridge Got the system working with no audio, Placed applealc.kext and liluin usb>clover>other kext folder Configured the clover configurator, added hdef and id = 13 i still see no sound device...please help This is the last piece of the puzzle, this is an m14x r1 laptop Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2548039 Share on other sites More sharing options...
MacPeet Posted December 11, 2017 Share Posted December 11, 2017 If you set the LayoutID in the Clover, then FixHDA must be set. Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2548364 Share on other sites More sharing options...
vandroiy2012 Posted December 11, 2017 Share Posted December 11, 2017 Please add 283 only. Added. Thank you! Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2548760 Share on other sites More sharing options...
JHeartyP Posted December 11, 2017 Share Posted December 11, 2017 Internal MIC is not working. I need assistance! AppleALC 1.2.2 on Lenovo v510-15ikb. ALC236, injected layout id 11 through config.plist. Vendor Id: 0x10ec0236Subsystem Id: 0x17aa3893Revision Id: 0x100002 CodecDump.zip CLOVER.zip ioreg.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2548967 Share on other sites More sharing options...
vusun123 Posted December 12, 2017 Share Posted December 12, 2017 CodecCommander is installed and I'm still having this error. I've actually had CC installed since the very start, since it fixes my issue with no sound after sleep. Out of curiosity I tried a boot without CodecCommander, and I still had the same out of phase issue, so regardless of CodecCommander I am having this issue. Post your CodecCommander here Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2549026 Share on other sites More sharing options...
Jademalo Posted December 12, 2017 Share Posted December 12, 2017 Post your CodecCommander here There, that should be it CodecCommander.kext.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2549150 Share on other sites More sharing options...
Aleques Posted December 15, 2017 Share Posted December 15, 2017 Hi, I have an Asus FX553 laptop. I managed to get sound to work with profile 3 (IIRC other value also worked but the sound was choppy). What I lack is microphone. My laptop has a combo jack but I don´t currently use it. Running Codec-Info printed this: ./Codec-Info.command HDEF@1F,3 = = = = = = = = = = = = = = = = = = = = = = = = = = = = Layout, hex: 0x00000003 , dec: 3 PinConfigurations: 1000a0902000179030000040f011114140108b00f01111413001a7905090f740f011114160102b01 Codecs Found: 1 HDA: 0 CodecAddress:0x0 VendorID: 0x10ec0235 RevisionID: 0x100002 CodecID: 283902517 Revision(dec):=1048578 Id=0x0235 Id(dec)=565 Vendor=0x10ec Vendor(dec)=4332 File Doesn't Exist, Will Create: /Users/alex/Desktop/Info.plist Merge: Error Reading File: Patch.plist Merge: Error Reading File: Patch.plist Merge: Error Reading File: Patch.plist Merge: Error Reading File: Patch.plist Merge: Error Reading File: Patch.plist Merge: Error Reading File: Patch.plist Merge: Error Reading File: Patch.plist And the resulting file is attached. EDIT: Not sure if helpful but this is what I got on Linux - everything works there (combo jack just tested): [ 10.136136] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 10.136137] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.136139] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 10.136139] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 10.136140] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 10.136141] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b Info.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2551091 Share on other sites More sharing options...
slowTerminal Posted December 16, 2017 Share Posted December 16, 2017 Hey guys, do you know how can I change these names? Audio is working fine Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2551675 Share on other sites More sharing options...
al6042 Posted December 17, 2017 Share Posted December 17, 2017 This looks like your AppleHDA not being original anymore... It seems to missing some of the language "lproj"-files under /Contents/Resources.... Try to get an original Kext and install it into /System/Library/Extensions with tools like "Kext Utility" and see if the problems resolved after a reboot. 3 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2551897 Share on other sites More sharing options...
slowTerminal Posted December 17, 2017 Share Posted December 17, 2017 This looks like your AppleHDA not being original anymore... It seems to missing some of the language "lproj"-files under /Contents/Resources.... Try to get an original Kext and install it into /System/Library/Extensions with tools like "Kext Utility" and see if the problems resolved after a reboot. It worked. Thank you! Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2552020 Share on other sites More sharing options...
MacPeet Posted December 22, 2017 Share Posted December 22, 2017 hello @vandroiy2012 I have one more codec for Realtek ALC236 for Lenovo Ideapad 500-15ISK. Resources_new236.zip LayoutID 15 (0F) all works good can you please added the new codec? many thanks 4 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2554933 Share on other sites More sharing options...
Jademalo Posted December 23, 2017 Share Posted December 23, 2017 Dell Inspiron 5578 ALC3253 28 10.13.2 The issue I'm having is very strange, and I'm not quite sure how to describe it. The internal speakers are absolutely perfect, however the headphone port seems to be out of phase. Setting the fader to the left channel plays exclusively left, but it comes out of both channels. Setting the fader to the right channel plays exclusively right, but comes out of both channels. Setting the fader to the middle however seems to cancel any audio that's present in both channels. Centred vocals for example immediately disappear, and you can only really hear things that are only present in only one channel in the recording. I'm not exactly sure how to approach this. The laptop definitely uses ALC3253, and the wiki for AppleALC says to use layout 28. Any advice? Thanks in advance! It's been a couple of weeks now, and I'm no further forward. Does anyone have any further suggestions for this issue? Thanks Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/76/#findComment-2555096 Share on other sites More sharing options...
Recommended Posts