Jhansi Posted June 8, 2016 Share Posted June 8, 2016 i installed AppleALC.kext in L/E and unPatched AppleHDA.kext(install using kextbeeeeeeast) after restart my Laptop i won't detect my Laptop Audio. i also also tried to install AppleALC.kext in EFI/Clover/Kext/10.11 and /Others too but result is same it won't detect my sound. i used Patched DSDT for Audio id-3 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241698 Share on other sites More sharing options...
MacKonsti Posted June 8, 2016 Share Posted June 8, 2016 Hello everyone, hi @vit9696, thanks again for your continuous support. A couple of easy questions... 1) I see some people kindly share their own AppleALC kexts which are at version v1.0.11 whilst your repo at GitHub shows v1.0.10. Are these privately compiled e.g. for testing? 2) I tried using AppleALC (v1.0.10) on my Intel NUC D54250WYKH (Core i5-4250U) and lspci reports the audio interface: 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 09) 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] which per my search for 8086:9c20 some sites report it as ALC 292 and others as ALC 293. The vendor/product ID from DCPIManager shows 0x10EC0283 revision 0x0003, so can you kindly confirm that this ID is supported by your v1.0.10 release kext? The reason I am asking is that I did try it and installed it on /L/E/ with injecting ID=12 (0x0C) in HDEF device, but to no avail. Running 10.10.5. Otherwise if not supported (yet) I would be happy to offer more information to assist. Thank you in advance. EDIT: Eventually this device is ALC 283 which is suggested by the Codec ID earlier, so most of those Ubuntu sites that had 8086:9c20 as ALC 292 may have been misleading to my search. Still, if someone can confirm that 0x10EC0283 is supported or not, that would be great. Cheers Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241710 Share on other sites More sharing options...
Riley Freeman Posted June 8, 2016 Share Posted June 8, 2016 ALC283 is supported but with layout ID 3 and 11 (see here). Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241739 Share on other sites More sharing options...
Jhansi Posted June 8, 2016 Share Posted June 8, 2016 please any One help me Out on this for my codec i tried but don't even detect my Audio Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241760 Share on other sites More sharing options...
insanelyDeepak Posted June 9, 2016 Share Posted June 9, 2016 remove AppleALC from S/L/E or /L/E , Copy it in Clover other or OS specific folder (depends upon you ) , make sure have vanilla AppleHDA and Caches are rebuilt (You have Ttools) , inject Layout = 3 or 12 try Both , restart and report result use DarwinDumper to reportwith GoodLuck 1 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241860 Share on other sites More sharing options...
wern apfel Posted June 9, 2016 Share Posted June 9, 2016 @Krestel.Bright, here a kext with some edits, see if mic is working, try it with layout-id 1 @Creative CA0132 users, here another kext for test purposes. Please test with layout-id 0 till 7 and give me some feedback that we can improve the kext for this codec. Layout-ID1: Alienware laptops4: 5.1 with C/Sub6: 6.1 with front HPother for testing to see how it behaves It would be useful if you try all them and report back, thanks AppleALC_layout-ID_0-7.zip 1 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241923 Share on other sites More sharing options...
Riley Freeman Posted June 9, 2016 Share Posted June 9, 2016 I installed 10.8.5 on a spare partition on my laptop to try out some stuff. AppleALC is loading, but something is going wrong because I have no devices and there are sound assertions in the console log. The same kext works fine if I boot into El Capitan. I've attached the debug output. I'm using the precompiled 1.0.10 debug build to rule out anything with my xcode setup (7.2.1 on 10.10.5 with 10.8 SDK). Update: I added the AppleHDA binary patches to my Clover config and now it works. So the issue seems to be with the patching in 10.8. alcdbg.zip Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2241944 Share on other sites More sharing options...
vit9696 Posted June 10, 2016 Author Share Posted June 10, 2016 Riley Freeman, the only supported codec in 10.8 is ALC1150 (see the compatibility table on github). No other codecs/patches were tested with anything earlier than 10.9. According to the log you have ALC269, which is unsupported but I assume you tried making the necessary changes on your own. Layouts/platforms are successfully routed for it. However, no binary patches are applied since they do not fit the requirements. Make sure you lowered the MinKernel version where necessary: https://github.com/vit9696/AppleALC/blob/master/Resources/ALC269/Info.plist#L246 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242018 Share on other sites More sharing options...
iAnkit Posted June 10, 2016 Share Posted June 10, 2016 Anybody tell me how to install it ? Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242034 Share on other sites More sharing options...
insanelyDeepak Posted June 10, 2016 Share Posted June 10, 2016 please any One help me Out on this for my codec i tried but don't even detect my Audio Anybody tell me how to install it ? Read Post #531 use Layout_ID = 3 is for IDT 7605 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242043 Share on other sites More sharing options...
Riley Freeman Posted June 10, 2016 Share Posted June 10, 2016 @vit9696: Thanks for the info. I didn't realise the patches were restricted to certain kernel versions. I enabled two patches (hBnUEQ== and hAjsEA==) by changing lines 292 and 328 to MinKernel 12 and now audio works fully (speaker, mic, headphone and line-in). Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242055 Share on other sites More sharing options...
vit9696 Posted June 10, 2016 Author Share Posted June 10, 2016 @vit9696: Thanks for the info. I didn't realise the patches were restricted to certain kernel versions. I enabled two patches (hBnUEQ== and hAjsEA==) by changing lines 292 and 328 to MinKernel 12 and now audio works fully (speaker, mic, headphone and line-in). Alright, I committed this change to master 1.0.12 should work out of the box once released. 2 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242074 Share on other sites More sharing options...
hectorox Posted June 10, 2016 Share Posted June 10, 2016 Is it possible to integrate in applealc.kext own layoutXX.xml and platforms.xml? That would be great! Thank You Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242118 Share on other sites More sharing options...
vandroiy2012 Posted June 10, 2016 Share Posted June 10, 2016 Is it possible to integrate in applealc.kext own layoutXX.xml and platforms.xml? That would be great! Thank You Yes. Read this Adding codec support Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242133 Share on other sites More sharing options...
son01490517 Posted June 11, 2016 Share Posted June 11, 2016 Hello, Thanks for creating such a wonderful kext. Here is some AppleHDA we have patched for various laptop: https://mega.nz/#!NgtG2S7a!diAhijI2IayJD1AQ9f7gNcO9vb7OyrpRUQ74N4l58Os Hope this helps in improving your codec database P/S: We ofter use layout 28 for Realtek, 12 for IDT - Connexant and 3 if we re-patch from Mirone's. Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242151 Share on other sites More sharing options...
Huckleberry Pie Posted June 12, 2016 Share Posted June 12, 2016 OK, so I downloaded a known clean, untouched 10.11.5 AppleHDA kext and removed the patch lines off my Clover config, and I can safely say that AppleALC does a 'swell job without anything else other than a simple layout-id edit. 1 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2242366 Share on other sites More sharing options...
al6042 Posted June 14, 2016 Share Posted June 14, 2016 Could anybody already check the functionality on macOS Sierra? Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243027 Share on other sites More sharing options...
Riley Freeman Posted June 14, 2016 Share Posted June 14, 2016 It's not working on Sierra (failing to apply any patches). It's also interfering with FakeSMC (causes a AppleKeyStore error during boot). Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243040 Share on other sites More sharing options...
vit9696 Posted June 14, 2016 Author Share Posted June 14, 2016 Riley Freeman, it does work on Sierra for most people. However, certain AppleHDA patches seem to be different from now on, and the codec base needs to be updated: https://applelife.ru/threads/ustanovka-macos-sierra-10-12-na-intel-pc.1367064/page-6#post-596096 There also is a chance of a race condition while processing the loaded kexts, which may cause a hang for the few of you. Time will show whether it is my bug or macOS's. 1 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243041 Share on other sites More sharing options...
Riley Freeman Posted June 14, 2016 Share Posted June 14, 2016 I'm sure some of the fault lies with Sierra. There's many changes under the hood. VoodooPS2 is also broken (causes a KP). I can only speak from my own experiences and they point to this possible race condition you mention. The system won't boot here with AppleALC installed as it blocks FakeSMC from doing it's thing. I couldn't even get the installer to boot until I removed AppleALC. 1 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243044 Share on other sites More sharing options...
insanelyDeepak Posted June 15, 2016 Share Posted June 15, 2016 @vt96996 for me too AppleALC results in hangs, i can't get screen until i remove it.. Any idea? Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243062 Share on other sites More sharing options...
vit9696 Posted June 15, 2016 Author Share Posted June 15, 2016 insanelyDeepak, well, I installed 10.12 vm here and have just fixed Shiki… mostly. Once I am fully done with it, I will check AppleALC. If I am able to reproduce the hang I will see what I can do. Pretty early in mother Russia though. 2 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243066 Share on other sites More sharing options...
Riley Freeman Posted June 15, 2016 Share Posted June 15, 2016 A quick update. As a test, I went back to my previous AppleHDA solution which involved patching AppleHDA with Clover and injecting the xml files into it. Replacing the 10.11 patch (zeroing out 8319D411) with the patch you linked above (zeroing out 8A19D411) gives me working audio on the ALC898 in my X79. Just using that patch with AppleALC still results in a hang however. Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243068 Share on other sites More sharing options...
insanelyDeepak Posted June 15, 2016 Share Posted June 15, 2016 insanelyDeepak, well, I installed 10.12 vm here and have just fixed Shiki… mostly. Once I am fully done with it, I will check AppleALC. If I am able to reproduce the hang I will see what I can do. Pretty early in mother Russia though. No problem , take your time , we are here to support you Goodluck 2 Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243093 Share on other sites More sharing options...
mendietinha Posted June 15, 2016 Share Posted June 15, 2016 just to report that it hangs here too. i managed to boot once by placing in LE, but no sound. alc282 layout28. thanks for the great tool. Link to comment https://www.insanelymac.com/forum/topic/311293-applealc-%E2%80%94-dynamic-applehda-patching/page/22/#findComment-2243098 Share on other sites More sharing options...
Recommended Posts