Squidderlee Posted July 13, 2011 Share Posted July 13, 2011 Thought I already did but here it is again. I have to keep the USB Bus Fix in no matter which version I use or nearly all my USB peripherals dont work, including apple keyboard. I have not attempted to optimize it beyond getting an error free DSDT dsdt.aml.zip Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1713836 Share on other sites More sharing options...
colordeficiency Posted July 13, 2011 Share Posted July 13, 2011 Can anyone help me with sleep? I've a EP35-DS3L, autosleep works and can be awaken by keyboard - spacebar key. But sleep don't work, previously it would reset CMOS but after patching AppleRTC it doesn't, but sleep still doesn't work. Please advise... Using a fully working DSDT from Autopatcher on a snow leopard before this... Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1713911 Share on other sites More sharing options...
MaLd0n Posted July 13, 2011 Author Share Posted July 13, 2011 Can anyone help me with sleep? I've a EP35-DS3L, autosleep works and can be awaken by keyboard - spacebar key. But sleep don't work, previously it would reset CMOS but after patching AppleRTC it doesn't, but sleep still doesn't work. Please advise... Using a fully working DSDT from Autopatcher on a snow leopard before this... send me kextstat run on terminal Thought I already did but here it is again. I have to keep the USB Bus Fix in no matter which version I use or nearly all my USB peripherals dont work, including apple keyboard. I have not attempted to optimize it beyond getting an error free DSDT fix warnings... There is no difference Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714009 Share on other sites More sharing options...
Squidderlee Posted July 13, 2011 Share Posted July 13, 2011 send me kextstatrun on terminal fix warnings... There is no difference you mentioned previously I added many fixs DTGP EHCI HDEF HPET IRQs REMOVE SMBUS SHUTDOWN UHCI FIX WARNINGS remove fixs USB in boot.plist try it test it ...... I did not make any optimizations just fixed the 2 warnings that appeared on the initial import of the extracted .dsl file Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714136 Share on other sites More sharing options...
colordeficiency Posted July 13, 2011 Share Posted July 13, 2011 attached is my kexttstat kextstat.rtf Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714237 Share on other sites More sharing options...
MaLd0n Posted July 13, 2011 Author Share Posted July 13, 2011 attached is my kexttstat kextstat.rtf what happens to sleep? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714240 Share on other sites More sharing options...
colordeficiency Posted July 13, 2011 Share Posted July 13, 2011 auto sleep works and can me awaken by pressing spacebar... when i sleep it or press the power button... it seems like it goes to sleep... but i cannot wake it... by power button or any other means Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714252 Share on other sites More sharing options...
Squidderlee Posted July 13, 2011 Share Posted July 13, 2011 auto sleep works and can me awaken by pressing spacebar... when i sleep it or press the power button... it seems like it goes to sleep... but i cannot wake it... by power button or any other means Exactly the same problem I have been trying to get an answer for... Black screen no wake up. Does your hard drive sleep too? Mine does not,,, or not immediately if it does Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714254 Share on other sites More sharing options...
MaLd0n Posted July 13, 2011 Author Share Posted July 13, 2011 auto sleep works and can me awaken by pressing spacebar... when i sleep it or press the power button... it seems like it goes to sleep... but i cannot wake it... by power button or any other means S3 enabled? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714256 Share on other sites More sharing options...
colordeficiency Posted July 13, 2011 Share Posted July 13, 2011 S3 enabled? you mean in the BIOS? what should i look out for? HPET 64bit enabled... Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714265 Share on other sites More sharing options...
Squidderlee Posted July 14, 2011 Share Posted July 14, 2011 S3 enabled? Fir me, yes.. have also tried it with S1 previously on snow Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714292 Share on other sites More sharing options...
MaLd0n Posted July 14, 2011 Author Share Posted July 14, 2011 the solution is out there appears briefly Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714370 Share on other sites More sharing options...
seanmcgpa Posted July 14, 2011 Share Posted July 14, 2011 MaLd0n, Hey thanks! After a few days of struggle, I finally for Lion (GM) up and running on my Asus P8Z68-V Pro (0601 Bios) using your guide with i7-2600k, 16GB memory. No sound, and I had to use hnak's AppleIntelE1000e Ethernet kext to get the Intel onboard ethernet working, but everything else seems fine. Very fast! (EDIT : Got sound working by using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to install ALC892 for non DSDT systems - works fine! Digital audio AND Analog audio) I have tried the DSDT Auto-Patcher, but of course there is nothing for this board. Does anyone have a working DSDT.aml for this board and bios? Anyway, thanks again! Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714452 Share on other sites More sharing options...
sultangetin Posted July 14, 2011 Share Posted July 14, 2011 as i have posted now i m having the Lion GM working fully, but the only problem i m facing now is about sharing the internet connection through LAN or Ethernet and file with windows computers, i didnt try about another mac coz i dont have. can anybody confirm that they are having this problem or the Internet and File sharing with windows computers are working fine??? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714529 Share on other sites More sharing options...
blackoutfolo2 Posted July 14, 2011 Share Posted July 14, 2011 I successful install DP4 lion on my computer thanks to MaLd0n. Unfortunately I can't get sound through the HDMI port of my graphics card through the kext voodoohda. I used an ATI 5770 and because of that I paid an Asus Nvidia ENGT440 ( http://www.techpowerup.com/reviews/ASUS/GeForce_GT_440/ ) after seeing on another forum that the guys had sound with the GT440. The guys had nothing to do except install voodooha.kext. I d'ont understand why I haven't sound with my gt440.I have tried all the versions of Voodoohda and I am so hopelessly . Any help will be appreciate.I don't want to buy another card again. nvidia_gt440_dump.rtf Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714771 Share on other sites More sharing options...
MaLd0n Posted July 14, 2011 Author Share Posted July 14, 2011 MaLd0n,I have tried the DSDT Auto-Patcher, but of course there is nothing for this board. Does anyone have a working DSDT.aml for this board and bios? Anyway, thanks again! send me files http://www.insanelymac.com/forum/index.php...st&id=81816 Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714774 Share on other sites More sharing options...
colordeficiency Posted July 14, 2011 Share Posted July 14, 2011 the solution is out thereappears briefly can you direct me to somewhere to start? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714801 Share on other sites More sharing options...
sirbow2 Posted July 15, 2011 Share Posted July 15, 2011 MaLd0n, I have tried the DSDT Auto-Patcher, but of course there is nothing for this board. Does anyone have a working DSDT.aml for this board and bios? Anyway, thanks again! post your DSDT and he will(most likely ) mod it, give it to you, and eventually add it to the app Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714817 Share on other sites More sharing options...
seanmcgpa Posted July 15, 2011 Share Posted July 15, 2011 MaLd0n, Thanks for your help with this. I'm attaching the "send_me.zip" file you asked for. The board is a new Asus P8Z68-V Pro. 0601 Bios. 16 GB memory. nVidia GTX 285. I have an i7-2600k, no overclock (yet). I used your guide and was able to get Lion up and running, but of course no Speed Step. And the GTX 285 is running horribly slow (Warcraft 60 fps in Snow Leopard 10.6.8, 7 fps in Lion). Thank you, IMK! He reminded me to change my SMBIOS from 12,1 to 3,1 ... now back to 60 fps! Thanks! To get ethernet and sound working, I had to use Tonymac's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to install ALC892 kexts and Intel ethernet kexts. Maybe the DSDT will help? Thank YOU!! send_me.zip Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714874 Share on other sites More sharing options...
MaLd0n Posted July 15, 2011 Author Share Posted July 15, 2011 The board is a new Asus P8Z68-V Pro. 0601 Bios. 16 GB memory. nVidia GTX 285. I have an i7-2600k, no overclock (yet). dsdt.seanmcgpa.zip UHCI? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714882 Share on other sites More sharing options...
seanmcgpa Posted July 15, 2011 Share Posted July 15, 2011 dsdt.seanmcgpa.zipUHCI? ATM I am using an Apple USB full keyboard and a bluetooth controller to radio to my Apple Magic Mouse : Apple Bluetooth Software Version: 2.5.0f17 Hardware Settings: Address: 00-19-15-4e-7c-49 Manufacturer: Broadcom Name: New Den Firmware Version: 14 (16718) Bluetooth Power: On Discoverable: Yes Vendor ID: 0 Product ID: 0x7fff HCI Version: 3 (0x3) HCI Revision: 16718 (0x414e) LMP Version: 3 (0x3) LMP Subversion: 17166 (0x430e) Device Type (Major): Computer Device Type (Complete): Mac Desktop Composite Class Of Device: 3801348 (0x3a0104) Device Class (Major): 1 (0x1) Device Class (Minor): 1 (0x1) Service Class: 464 (0x1d0) Peer to Peer Supported: No Services: Bluetooth File Transfer: Folder other devices can browse: ~/Public Requires Authentication: Yes State: Enabled Bluetooth File Exchange: Folder for accepted items: ~/Downloads Requires Authentication: No When other items are accepted: Ask When PIM items are accepted: Ask When receiving items: Prompt for each file State: Enabled Devices (Paired, Favorites, etc): seanmcgpa’s mouse: Address: 60-fb-42-fa-b8-66 Type: Mouse Firmware Version: 0x84 Services: Apple Wireless Mouse Paired: Yes Favorite: No Connected: Yes Manufacturer: Apple (0x3, 0x31c) Vendor ID: 0x5ac Product ID: 0x30d EDR Supported: No eSCO Supported: No Incoming Serial Ports: Bluetooth-PDA-Sync: RFCOMM Channel: 3 Requires Authentication: No Outgoing Serial Ports: Bluetooth-Modem: Address: RFCOMM Channel: 0 Requires Authentication: No USB High-Speed Bus: Host Controller Location: Built-in USB Host Controller Driver: AppleUSBEHCI PCI Device ID: 0x1c26 PCI Revision ID: 0x0005 PCI Vendor ID: 0x8086 Bus Number: 0x1d Hub: Product ID: 0x0024 Vendor ID: 0x8087 (Intel Corporation) Version: 0.00 Speed: Up to 480 Mb/sec Location ID: 0x1d100000 / 2 Current Available (mA): 500 Current Required (mA): 0 BCM92045B3 ROM: Product ID: 0x105e Vendor ID: 0x047d (Kensington) Version: 1.00 Serial Number: 0019154E7C49 Speed: Up to 12 Mb/sec Manufacturer: Broadcom Corp Location ID: 0x1d120000 / 5 Current Available (mA): 500 Current Required (mA): 100 Keyboard Hub: Product ID: 0x1006 Vendor ID: 0x05ac (Apple Inc.) Version: 95.15 Serial Number: 0 Speed: Up to 480 Mb/sec Manufacturer: Apple, Inc. Location ID: 0x1d110000 / 4 Current Available (mA): 500 Current Required (mA): 300 USB/PS2 Mouse: Product ID: 0xaa01 Vendor ID: 0x05b4 (LG Semicon Co., Ltd.) Version: 0.00 Speed: Up to 1.5 Mb/sec Manufacturer: Chander Electroics Corp. Location ID: 0x1d113000 / 7 Current Available (mA): 100 Current Required (mA): 100 Apple Keyboard: Product ID: 0x0220 Vendor ID: 0x05ac (Apple Inc.) Version: 0.69 Speed: Up to 1.5 Mb/sec Manufacturer: Apple, Inc Location ID: 0x1d112000 / 6 Current Available (mA): 100 Current Required (mA): 20 Vendor-Specific Device: Product ID: 0x3000 Vendor ID: 0x0cf3 (Atheros Communications, Inc.) Version: 2.00 Speed: Up to 12 Mb/sec Location ID: 0x1d170000 / 3 Current Available (mA): 500 Current Required (mA): Unknown (Device has not been configured) Is that what you needed? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714898 Share on other sites More sharing options...
MaLd0n Posted July 15, 2011 Author Share Posted July 15, 2011 Host Controller Location: Built-in USB Host Controller Driver: AppleUSBEHCI PCI Device ID: 0x1c26 PCI Revision ID: 0x0005 PCI Vendor ID: 0x8086 Bus Number: 0x1d in DSDT the device is EHCI dont rename to UHCI unnecessary Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714903 Share on other sites More sharing options...
D-an-W Posted July 15, 2011 Share Posted July 15, 2011 Good morning MaLd0n, you are everywhere! Thanks for the guide, was easy to follow. Do you still recommend the CMOS reset fix posted here when used with a DSDT created by your tool? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714915 Share on other sites More sharing options...
ddduckman Posted July 15, 2011 Share Posted July 15, 2011 Maldon i tried your guide but i'm stuck at Local apic error, do you have a solution for patching mach_kernel or chameleon to boot successfully with (pavilion DV6 core i5)??? Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1714958 Share on other sites More sharing options...
MaLd0n Posted July 15, 2011 Author Share Posted July 15, 2011 Do you still recommend the CMOS reset fix posted here when used with a DSDT created by your tool? Yes Maldon i tried your guide but i'm stuck at Local apic error, do you have a solution for patching mach_kernel or chameleon to boot successfully with (pavilion DV6 core i5)??? look it http://www.insanelymac.com/forum/index.php...=262176&hl= Link to comment https://www.insanelymac.com/forum/topic/256729-lion-installation-via-usb-stick-using-chameleon/page/30/#findComment-1715091 Share on other sites More sharing options...
Recommended Posts