Jump to content

AMD and Retail Snow Leopard 10.6.5 --> 10.6.8 Final[GUIDE]

Mohamed Khairy

By Mohamed Khairy,
in AMD CPUs

 Share
1,350 posts in this topic

Recommended Posts

indio99
indio99
Posted
Posted

Hi, sorry for my english =(

 

I installed my hackcintosh following your guide, and you are help me very

much

 

The system work perfectly, with geforce 9400 DVI, but I am want to work with the integrated graphics, a geforce 8200

 

"• NVIDIA® GeForce 8200 (MCP78S) Series single chipset " and this is my motherboard http://www.msi.com/index.php?func=proddesc...mp;maincat_no=1

 

but I do not found any info of this, I think, that do not work in this integrated graphics with QE and CI

 

If you can tell me some info, I have very thanks for you

 

Thanks

 

Best regards

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
Hi, sorry for my english =(

 

I installed my hackcintosh following your guide, and you are help me very

much

 

The system work perfectly, with geforce 9400 DVI, but I am want to work with the integrated graphics, a geforce 8200

 

"• NVIDIA® GeForce 8200 (MCP78S) Series single chipset " and this is my motherboard http://www.msi.com/index.php?func=proddesc...mp;maincat_no=1

 

but I do not found any info of this, I think, that do not work in this integrated graphics with QE and CI

 

 

 

 

Thanks

 

Best regards

 

iam not sure about igfx but you can try this injector with adding graphicsenbler on boot plist

If you can tell me some info, I have very thanks for you

Link to comment
Share on other sites
indio99
indio99
Posted
Posted
iam not sure about igfx but you can try this injector with adding graphicsenbler on boot plist

If you can tell me some info, I have very thanks for you

 

Hi

 

I probed with this injector and with ATY_init, with graphicsenabler in boot.plist, but i have a crack, and the system are auto-reboot

 

I removed the string of boot.plist with the two injectors, and the system, start well, but in vesa mode

 

Too, I added my id device into NVinject info.plist, to this:

in IOPCImatch key I replace the default string for 0x0849

i don´t know if this are correct, but the result are same. With the graphicsenabler in boot.plist, the system is continued auto-reboot

 

Thanks

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
Hi

 

I probed with this injector and with ATY_init, with graphicsenabler in boot.plist, but i have a crack, and the system are auto-reboot

 

I removed the string of boot.plist with the two injectors, and the system, start well, but in vesa mode

 

Too, I added my id device into NVinject info.plist, to this:

in IOPCImatch key I replace the default string for 0x0849

i don´t know if this are correct, but the result are same. With the graphicsenabler in boot.plist, the system is continued auto-reboot

 

Thanks

 

what is your card id it must contain 0x00000000

Link to comment
Share on other sites
indio99
indio99
Posted
Posted

Hi

 

I can´t take a snap shot because I haven´t got QE and CI, when I press cmd+shift+3 don´t make nothing

 

The result of system info are same to lspci

 

Ven ID 10de; Vendor nVidia Corporation; Dev ID 0849; Device C77 [GeForce 8200]; Class Display controller; Subclass VGA compatible controller

 

but in the Kexts seccion, I see that C77 [GeForce 8200] Device are work in three kexts, Geforce.kext, AppleUpstreamUserClient.Kext and IONDRVSupport.kext

 

I found this info

 

Display Devices
---------------
	  Card name: NVIDIA GeForce 8200
   Manufacturer: NVIDIA
	  Chip type: GeForce 8200
	   DAC type: Integrated RAMDAC
	 Device Key: Enum\PCI\VEN_10DE&DEV_0849&SUBSYS_08491849&REV_A2
 Display Memory: 1696 MB
  Dedicated Memory: 496 MB
  Shared Memory: 1199 MB
   Current Mode: 1366 x 768 (32 bit) (60Hz)
   Monitor Name: Generic PnP Monitor
  Monitor Model: LL 3190T
	 Monitor Id: FUS07A3
	Native Mode: 1366 x 768(p) (59.790Hz)
	Output Type: HD15
	Driver Name: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver File Version: 8.16.0011.9107 (English)
 Driver Version: 8.16.11.9107
	DDI Version: 10
   Driver Model: WDDM 1.1
 Driver Attributes: Final Retail
  Driver Date/Size: 9/27/2009 15:12:22, 7614056 bytes
	WHQL Logo'd: Yes
WHQL Date Stamp: 
 Device Identifier: {D7B71E3E-4B09-11CF-6A58-42281DC2C535}
	  Vendor ID: 0x10DE
	  Device ID: 0x0849
	  SubSys ID: 0x08491849
	Revision ID: 0x00A2

 

I probe with 0x08491849 in the NVInject info.plist and the result are same, when I enable GraphicsEnabler in boot.plist the system not have a panic, directly auto-reboot

 

Too, I found in some webs this SubSys´s ID 0x82F21043 and 0xCB8410DE, but I don´t know if I probe with this or not

 

Perhaps this is impossible to solved

 

Thanks

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
Hi

 

I can´t take a snap shot because I haven´t got QE and CI, when I press cmd+shift+3 don´t make nothing

 

The result of system info are same to lspci

 

Ven ID 10de; Vendor nVidia Corporation; Dev ID 0849; Device C77 [GeForce 8200]; Class Display controller; Subclass VGA compatible controller

 

but in the Kexts seccion, I see that C77 [GeForce 8200] Device are work in three kexts, Geforce.kext, AppleUpstreamUserClient.Kext and IONDRVSupport.kext

 

I found this info

 

Display Devices
---------------
	  Card name: NVIDIA GeForce 8200
   Manufacturer: NVIDIA
	  Chip type: GeForce 8200
	   DAC type: Integrated RAMDAC
	 Device Key: Enum\PCI\VEN_10DE&DEV_0849&SUBSYS_08491849&REV_A2
 Display Memory: 1696 MB
  Dedicated Memory: 496 MB
  Shared Memory: 1199 MB
   Current Mode: 1366 x 768 (32 bit) (60Hz)
   Monitor Name: Generic PnP Monitor
  Monitor Model: LL 3190T
	 Monitor Id: FUS07A3
	Native Mode: 1366 x 768(p) (59.790Hz)
	Output Type: HD15
	Driver Name: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver File Version: 8.16.0011.9107 (English)
 Driver Version: 8.16.11.9107
	DDI Version: 10
   Driver Model: WDDM 1.1
 Driver Attributes: Final Retail
  Driver Date/Size: 9/27/2009 15:12:22, 7614056 bytes
	WHQL Logo'd: Yes
WHQL Date Stamp: 
 Device Identifier: {D7B71E3E-4B09-11CF-6A58-42281DC2C535}
	  Vendor ID: 0x10DE
	  Device ID: 0x0849
	  SubSys ID: 0x08491849
	Revision ID: 0x00A2

 

I probe with 0x08491849 in the NVInject info.plist and the result are same, when I enable GraphicsEnabler in boot.plist the system not have a panic, directly auto-reboot

 

Too, I found in some webs this SubSys´s ID 0x82F21043 and 0xCB8410DE, but I don´t know if I probe with this or not

 

Perhaps this is impossible to solved

 

Thanks

 

0x084910de

 

add this

 

 

 

and make sure that graphicsenbler yes is on boot plist

 

and please

 

write all your hardware i need to test nforce kext for SB :rolleyes:

Link to comment
Share on other sites
indio99
indio99
Posted
Posted
0x084910de

 

add this

 

 

 

and make sure that graphicsenbler yes is on boot plist

 

and please

 

write all your hardware i need to test nforce kext for SB :)

 

my hardware from infosystem are Here

 

at this time, I not probed 0x084910de in the NVInject info.plist, when I make, I respond with this results.

 

One thing, with all injectors removed, if I put yes GraphicsEnabler in Boot.plist, too, the system auto-reboot, not have a panic

 

Thanks

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
my hardware from infosystem are Here

 

at this time, I not probed 0x084910de in the NVInject info.plist, when I make, I respond with this results.

 

One thing, with all injectors removed, if I put yes GraphicsEnabler in Boot.plist, too, the system auto-reboot, not have a panic

 

Thanks

 

for reboot

use -v

when reboot accour

or record screen with camera

 

and some thing to say

Not supported :

- Graphic controllers integrated to chipset don't work (except 9400)

- Some NVS 140 & 570 (might be fixed later)

- VAIO internal screen

Link to comment
Share on other sites
MacieKK
MacieKK
Posted
Posted
ok problem is from firewire disable it

 

There isn't any way to disable firewire in my notebook bios... :blink:

I googled this problem and there are lots of people who have the same problem as me...

But i have one question.

 

Is it possible to disable firewire kext or is it possible to omit the firewire in installation ?

:P

 

EDIT

 

I found my firewire card model: Ricoh 1394 OHCI

Link to comment
Share on other sites
Mohamed Khairy
Mohamed Khairy
Posted
  • Author
Posted
There isn't any way to disable firewire in my notebook bios... :P

I googled this problem and there are lots of people who have the same problem as me...

But i have one question.

 

Is it possible to disable firewire kext or is it possible to omit the firewire in installation ?

:D

 

EDIT

 

I found my firewire card model: Ricoh 1394 OHCI

 

try use iatkos s3 v2

or you can setup retail by remove HDD laptop and connect it to presetuped mac and install on it

 

then remove kexts

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...