docfunk Posted August 21, 2008 Share Posted August 21, 2008 did a fresh install all went ok and faster then kalyway 10.5.2.. now running 9.4.0 Modbin. it fixed my usb and firewire and system profiler problem and its booting up faster then it was will test on a older amd ss2 system later this weekend. Link to comment Share on other sites More sharing options...
H.I.T Posted August 21, 2008 Share Posted August 21, 2008 @DickDuff : thx u sm ! Link to comment Share on other sites More sharing options...
sepulchre Posted August 21, 2008 Share Posted August 21, 2008 sepulchre, you have been a great help! Also, I'm not sure if you figured out how to get the other things on your board working. I'm using NVKush drivers instead of NVinject ones and I have no problem restarting/shutting down. Hope that helps! No problem fella, I was only re-iterating what I leanrt here from other good folk Can you tell me where you got the NVKush driver from, what gfx car your using and how you went about installing them i.e. did you remove the NVinject drivers first (if you isntalled them) cheers! Link to comment Share on other sites More sharing options...
dralionux Posted August 22, 2008 Share Posted August 22, 2008 This is a very good release, I had no problem installing iDeneb v1 on a Dell Inspiron 530s CPU: Intel Pentium Dual Core e2180 2.0 GHz Memory: 2 GB DDR2 800 Audio: ALC888 working Wireless: Asus WL-138G_v2 PCI working (Broadcom kext) SATA HDD & DVD Graphics: ATI 2400 Pro PCIE : only 1024x768 resolution, no CI/QE Kernel 9.2.0 Speedstep Many thanks to Layne (Punk92) and all the OSx86 developers Link to comment Share on other sites More sharing options...
CrazyELF Posted August 23, 2008 Share Posted August 23, 2008 osx Ideneb 10.5.4 Installed great however my Netgear GA311 lan card wont install? the chip set is Rtl8169s-32 and the ideneb 10.5.4 Installer have nic drivers for this card what's the deal?? did i do something wrong? Need Help thanks durring boot with -v I get the following extension "com.apple.iokit.IONetworkingFamily" cannot be found can't determine Immediate dependencies for extension com.appleRTL169Ethernet couldn't alloc class "AppleRTL8169Ethernet. Link to comment Share on other sites More sharing options...
dmitry89rus Posted August 23, 2008 Share Posted August 23, 2008 hi to all ! i have configuration in my signature checkboxes what do I choose? Link to comment Share on other sites More sharing options...
wildchild Posted August 23, 2008 Share Posted August 23, 2008 Just did a second clean install and boy am I happy. Right off the bat, everything works perfectly. 7600GT 256MB had to be patched with NVKush separately to avoid power off and reboot issues. But network and sound (Azailia) = 100% working perfectly. Also, I used the Vanilla kernel included. So happy! BTW, does anyone know how I can skin it back to the standard OS X logos and wallpapers? No offense iDeneb, but I would prefer the authentic look of the regular OS. Thanks again! Link to comment Share on other sites More sharing options...
The Milstead Posted August 23, 2008 Share Posted August 23, 2008 This may be a ridiculous question, but can I install this on top of my Kalyway 10.5.2 AMD installation, or will all my applications and settings be wiped out anyway? Link to comment Share on other sites More sharing options...
wildchild Posted August 24, 2008 Share Posted August 24, 2008 so, every time I try to update any software, I get a weird error that says "<Baseinstaller><Baseinstaller><Carbonlib><>" or something to that effect. Any suggestions? Link to comment Share on other sites More sharing options...
sssrs Posted August 24, 2008 Share Posted August 24, 2008 BOOT ERROR on Acer Aspire One Link to comment Share on other sites More sharing options...
Roberttoja Posted August 24, 2008 Share Posted August 24, 2008 Hi, I have an Atheros AR5007EG Wireless Network adapter. It didn`t work with Kalyway neither with iAtkos. Will it work with this iDeneb realese? If yes, what should I do to make it work? Link to comment Share on other sites More sharing options...
r03n_d Posted August 24, 2008 Share Posted August 24, 2008 my mouse and keyboard aren't working during installation, so i can't install.. Link to comment Share on other sites More sharing options...
Cris900 Posted August 24, 2008 Share Posted August 24, 2008 external usb or noteook? Link to comment Share on other sites More sharing options...
bisdak4920 Posted August 24, 2008 Share Posted August 24, 2008 This is extremely good excellent release. Works like a charm on my ACER Aspire WXMi 5562 without modifying anything, Lan works, wireless works, software updates works. Specs: Intel core duo 1.66 mhz, ati mobility x1600, 160gig hd 7200 rpm, broadcom 169d lan, intel wireless. The only downside is the is the video which is not giving me my max resolution of 1280 x 800. Cheers! Link to comment Share on other sites More sharing options...
venerzky Posted August 24, 2008 Share Posted August 24, 2008 For me iDeneb is one of the best OSX86 i ever install on my Compaq Presario C767TU laptop.. But my biggest problem now is i can't see/access my optical drive. Optical Drive: TSSTcorp CDDVDW TS-L632H, DVD writer dual layer Anyone can help me about this? Thanks, funny thing is i used my optical drive to install iDeneb,, but after the installation its not detectable anymore.. my optical drive is now recognized. i made a reinstallation and instal the drivers chipset.. wuhu!! way to go iDeneb!! Link to comment Share on other sites More sharing options...
wildchild Posted August 24, 2008 Share Posted August 24, 2008 my mouse and keyboard aren't working during installation, so i can't install.. Try disabling legacy support in your computer's bios before you start the install process. This might work since it's worked to help get certain ports working on my comp. Again, this will only help if your mouse keyboard is usb powered. Link to comment Share on other sites More sharing options...
venerzky Posted August 24, 2008 Share Posted August 24, 2008 Hi,I have an Atheros AR5007EG Wireless Network adapter. It didn`t work with Kalyway neither with iAtkos. Will it work with this iDeneb realese? If yes, what should I do to make it work? well its not working w/ iDeneb.. i also have that kind of wifi adapter.. what i did is i bought a cheap wifi usb adapter compatible w/ mac os x86.. My problem now is my built-in audio,, its a Conexant HD-Audio SmartAudio 221.. and also the built-in Webcam. Other than this, all are working good. My laptop is a Compaq Presario C767TU.. Link to comment Share on other sites More sharing options...
wildchild Posted August 25, 2008 Share Posted August 25, 2008 well its not working w/ iDeneb.. i also have that kind of wifi adapter.. what i did is i bought a cheap wifi usb adapter compatible w/ mac os x86.. My problem now is my built-in audio,, its a Conexant HD-Audio SmartAudio 221.. and also the built-in Webcam. Other than this, all are working good. My laptop is a Compaq Presario C767TU.. Did you try Azalia? Link to comment Share on other sites More sharing options...
seanmcgpa Posted August 25, 2008 Share Posted August 25, 2008 I have an older Dell 9300 with Pentium-M (SSE2). I would love to get iDeneb working on this machine ... does anyone know what I need to do to get it working? Are there special flags or kernels I need to try to boot the installer as SSE2? Thanks! Link to comment Share on other sites More sharing options...
ibuyak Posted August 25, 2008 Share Posted August 25, 2008 All fine! BUT, not allow DVD-RW drive on IDE controller Tested on: Intel 915P, intel 945P, Intel 965G Link to comment Share on other sites More sharing options...
titooo1 Posted August 25, 2008 Share Posted August 25, 2008 iDeneb 10.5.4 is really great. Excellent I must say (and don't know why there is so much hate to do release when punk giave thansk to everybody...) But for some reason, I can get my sound working when I had it on Kalyway 10.5.2.... HERE can find the kexts I used and worked out of the box in Kalyway. Someone could help please? Link to comment Share on other sites More sharing options...
dotjuice Posted August 25, 2008 Share Posted August 25, 2008 This is the best version I've tried so far. Started with Kalyway 10.5.2, iATKOS 10.5.4 and JAS 10.5.4 Download it now this worked brilliantly on my Intel system. (Specs below) Link to comment Share on other sites More sharing options...
venerzky Posted August 25, 2008 Share Posted August 25, 2008 Did you try Azalia? yup.. its working good for the internal speakers,, but the built-in audio is still not working.. Link to comment Share on other sites More sharing options...
Kdubz Posted August 25, 2008 Share Posted August 25, 2008 I was wondering if anyone could help me out; I'm trying to install this DVD but when I try to load the DVD, it just won't load. You know how you see the cursor rotate? Well, it'll rotate maybe twice...then it'll just stop and the dvd won't load. Could it possibly be a bad iso? Let me know your thoughts, I'm anxious to get this working. Link to comment Share on other sites More sharing options...
venerzky Posted August 25, 2008 Share Posted August 25, 2008 maybe a bad installer.. burn the iso on the slowest mode.. Link to comment Share on other sites More sharing options...
Recommended Posts