Alan Garza Posted July 19, 2008 Share Posted July 19, 2008 Works fine here! HP DV9347cl Intel C2D Nvidia 9600go (I install a modified kext to have dual screen) SATA Thanks to Turk team!! Link to comment Share on other sites More sharing options...
saskmac Posted July 19, 2008 Share Posted July 19, 2008 Have downloaded and burned the iso. Upon entering Disk Utility, it can't see my second set of SATA channels (that is where the drive is that i usually install OS X, with Vista on the drive on the first SATA channel). I assume that I could just switch the cabling in my computer to change that problem (first making sure I don't hoop Vista by doing so). Link to comment Share on other sites More sharing options...
GingerTea Posted July 19, 2008 Share Posted July 19, 2008 MD5: http://iatkos.wikidot.com/md5 6ed6282a521fe0ffdcbe028e6e43da0e Link to comment Share on other sites More sharing options...
LaserSteve Posted July 19, 2008 Share Posted July 19, 2008 Anybody know if this will allow my Atheros 5007 mini pci card to work? I've just downloaded Kalyway's 10.5.2 version and installed it, but Atheros is not playing ball. Everything else works native, including my SATA drives. I can't get this one from the demon though as i'm not a member and it's not open to pubic atm If anyone is prepared to invite me it would be nice..pm me if you can. btw, i do seed.. my laptop is permanently connected to the internet on a 10Mb connection Thanks Steve Link to comment Share on other sites More sharing options...
resiroth Posted July 19, 2008 Share Posted July 19, 2008 I had the same problem as saskmac. It will only see the vista drive, not the free SATA drive. kalyway 10.5.2 works great until it says when I try to combo update I don't meet the requirements. Link to comment Share on other sites More sharing options...
m.carroll Posted July 19, 2008 Share Posted July 19, 2008 install works fine, but fails to load AppleACPIPort driver on boot. I'm on a Asus P5k-Deluxe WiFi/AP, Q6600, 4GB RAM, nVidia 9800GTX. Any suggestions? Link to comment Share on other sites More sharing options...
vbetts Posted July 19, 2008 Share Posted July 19, 2008 I just got a cheap Pentium D system I wish to run this on, here's the specs. Intel Pentium D 3.0Ghz ASRock 4CoreDual North VIA PT880 Pro/PT880 Ultra South VIA VT8237S ddr400/ddr2667(Can only use 1 though) sound Realtek ALC888 network VIA PHY VT6103 Radeon X1800XT 1 gb ddr400 Is this the right release for this system? I plan on using it for somewhat of a media computer. Link to comment Share on other sites More sharing options...
Guilherme Carvalho Posted July 19, 2008 Share Posted July 19, 2008 is there anyway that i can override this ACPI stuff... i use a Phillips 13NB8504 notebook, and all the versions till kalliway 10.5.1 it was rebooting all the time, and on the 10.5.2 it had a kernell panic :-( Link to comment Share on other sites More sharing options...
pressure Posted July 19, 2008 Share Posted July 19, 2008 were is kalyway? Kalyway releases are rock stable!! Link to comment Share on other sites More sharing options...
tinush Posted July 19, 2008 Share Posted July 19, 2008 install works fine, but fails to load AppleACPIPort driver on boot. I'm on a Asus P5k-Deluxe WiFi/AP, Q6600, 4GB RAM, nVidia 9800GTX. Any suggestions? had the same problem, select under system the sata option worked for me, had the same problem updating from iatkos v2 to 10.5.3 (used the appleachiport.kext and the ioachifamily.kext from kelyway to update) T Link to comment Share on other sites More sharing options...
amdahlj Posted July 19, 2008 Share Posted July 19, 2008 It took a lot of messing around (it always does) to get everything up and running, but so far this is the best install of OSx86 I have gotten on my hackintosh so far. EFI v8, vanilla kernel, wireless/audio detected immediately... the only issue was getting my graphics card recognized. Once I added the appropriate EFI strings for my GS7900, everything was working perfectly. Link to comment Share on other sites More sharing options...
Espionage724 Posted July 19, 2008 Share Posted July 19, 2008 I just installed this on my laptop. It actually detects my ethernet (I think, it shows up in the network thing but idk if it works) and it detects a bluetooth modem (I don't have bluetooth but I do have a modem). When installing it seemed like it hung at the very beginning of install but it didn't. Link to comment Share on other sites More sharing options...
acecool9 Posted July 19, 2008 Share Posted July 19, 2008 this disk is amazing. it took 2 day to download but the wait is well worth it. Link to comment Share on other sites More sharing options...
m.carroll Posted July 20, 2008 Share Posted July 20, 2008 had the same problem, select under system the sata optionworked for me, had the same problem updating from iatkos v2 to 10.5.3 (used the appleachiport.kext and the ioachifamily.kext from kelyway to update) T sweet, i'll have to try that. *sits through bootup* Link to comment Share on other sites More sharing options...
frefrefrer Posted July 20, 2008 Share Posted July 20, 2008 pefect for me Link to comment Share on other sites More sharing options...
BryX Posted July 20, 2008 Share Posted July 20, 2008 Hi, I've been trying to get this installation working on my Inspiron 9400, when I try to use a primary partition the disk utility won't erase it and therefore I can't install the os. However, when I use a logical partition the os will install, but I can't seem to get it to boot. I have Vista installed on another partition obviously as a primary partition which stays as the active partition after the installation, I also have both the small 50 mb (active) and the 5/6 gb(Logical) bakcup dell partitions. What should I do?,,, I did have kayway 10.5.1 installtion on my drive at some point a long time ago but have gotten rid of it since. Link to comment Share on other sites More sharing options...
MICHAELSD Posted July 20, 2008 Share Posted July 20, 2008 "Improved SATA support." Did anyone notice this on systems that weren't able to install OS X before? I'll try iATKOs 4 and see if I can finally get Leopard running... Link to comment Share on other sites More sharing options...
tdtran1025 Posted July 20, 2008 Share Posted July 20, 2008 I installed it last night. Hmmm, it's a mixed feeling. First off, it's the only only yet of its kind taking you straight to 10.5.4. But secondly, it's carried over from the old version all (or lack of new) the archaic kexts for some of the most commonly available internal components such as network card and sound. I have a motherboard that is almost 100% compliant with vanilla kernel that it works right out of the box. But with iATKOS (no matter what version), network and sound are dead. I have always liked iATKOS approach in scaling down to support just Intel only. However; the choices are so limited in selecting components during install stil baffles me since those don't take up much room or effort. It could be a very, very nice release if support for various network cards is updated. Nevertheless, it is still a good release and one of its kind, for now. Great work! Link to comment Share on other sites More sharing options...
3Dman Posted July 20, 2008 Share Posted July 20, 2008 Very good release special thanks to Uphuck and all the team. Link to comment Share on other sites More sharing options...
pasmac Posted July 20, 2008 Share Posted July 20, 2008 Improved sata support .... well not for me since V1r2 whinch worked great, Version 2 and now Version 4 DVD don't boot.. DVD abort at .. I/O error SAM multimedia ........ iATKOS Version 1 r2 worked for me so good no problem at boot so ever.... What could be wrong with my Hardware?????? What iAKTOS V1r2 had to boot and why V4 doesn't??? My Specs are pretty up to date for an abort on a DVD since V1r2 Idea anyone.. Thanks.. HP dv9700t CPU Type Mobile DualCore Intel Core 2 Duo T9300, 2681 MHz Motherboard Chipset Intel Crestline-PM PM965 System Memory 3072 MB (DDR2-667 DDR2 SDRAM) Disk Drive FUJITSU MHY2250BH (250 GB, 5400 RPM, SATA) Disk Drive Hitachi HTS542525K9SA00 (250 GB, 5400 RPM, SATA) Video Adapter NVIDIA GeForce 8600M GS (512 MB) IDE Controller Intel® ICH8M Ultra ATA Storage Controllers - 2850 IDE Controller Intel® ICH8M-E/M SATA AHCI Controller Optical Drive CM0342J PYI929Y SCSI CdRom Device Optical Drive TSSTcorp CDDVDW TS-L632N Link to comment Share on other sites More sharing options...
resiroth Posted July 20, 2008 Share Posted July 20, 2008 OMG! No really holy {censored}! It would only install on one of my hard drives but EVERYTHING IS PERFECT. I had to patch alc885 audio but that is not hard when you have internet access. Very stable and Reboot works fine. I never sleep but I'll test that too soon. I never got 10.5.4 working before this so thank you very much. Link to comment Share on other sites More sharing options...
ekeaze Posted July 20, 2008 Share Posted July 20, 2008 Thank you very much... Works perfect on my Q6700 , Asus Blitz Extreme... only shut down dont work propperly... Is there some option on start instalation for it? Link to comment Share on other sites More sharing options...
Araikus Posted July 20, 2008 Share Posted July 20, 2008 Great Job Guys, well done, installs perfectly on word go... no patching req. I Have one question however... I cant get Quartz Extreme Working... Which means no WOW for me... Any advice? I run A dell d830 with Nvidia Quadro nvs140 512mb Link to comment Share on other sites More sharing options...
krrr Posted July 20, 2008 Share Posted July 20, 2008 This worked for my Custom Desktop . Hurray, Thanks a million to UpHuck and rest of the team for iATKOS v4i Link to comment Share on other sites More sharing options...
tinush Posted July 20, 2008 Share Posted July 20, 2008 Great Job Guys, well done, installs perfectly on word go... no patching req. I Have one question however... I cant get Quartz Extreme Working... Which means no WOW for me... Any advice? I run A dell d830 with Nvidia Quadro nvs140 512mb take a look at the nvinject.kext >show package content copy the info.plist to desktop and open with textedit and look for the <integer>60000</integer> line (60000 must be zero like <integer>0</integer> copy the modded info.plist back in the nvinject.kect and repair permissions reboot T Link to comment Share on other sites More sharing options...
Recommended Posts