Noti Posted August 14, 2008 Share Posted August 14, 2008 Will it work with a ATI x1050 too? Link to comment Share on other sites More sharing options...
mac-fish Posted August 25, 2008 Share Posted August 25, 2008 this working for leo would be awesome... Link to comment Share on other sites More sharing options...
mac-fish Posted August 25, 2008 Share Posted August 25, 2008 ok, so now i installed 10.4.6, only to see if it works. so i've got the mobility x700 w/ 128mb ram and the id 5653 i've patched the kext with your script but i still get no QE/CI after reboot! kextload says that the kext is loaded sysprofiler too, but i don't get QE/CI! PLZ HELP! Link to comment Share on other sites More sharing options...
alex65 Posted September 4, 2008 Share Posted September 4, 2008 Look here http://forum.insanelymac.com/index.php?sho...mp;#entry570683 Link to comment Share on other sites More sharing options...
mac-fish Posted September 4, 2008 Share Posted September 4, 2008 Look here http://forum.insanelymac.com/index.php?sho...mp;#entry570683 yea, i have to say it works in leo too! but of course no qe/ci ... maybe it works if you install the framebuffer, then the atiradeon9700 from tiger, enter the right framebuffer in the IONDRV and then maybe we get qe/ci in leo? Link to comment Share on other sites More sharing options...
opusdei Posted September 11, 2008 Share Posted September 11, 2008 Got it: Radeon X600 (PCIE): Chipset Model: Radeon X600 (PCIE) Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x3e50 Revision ID: 0x0000 Displays: Display: Resolution: 1280 x 1024 @ 85 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Now I'll try to get QE to work somehow.. Link to comment Share on other sites More sharing options...
makurei86 Posted September 19, 2008 Share Posted September 19, 2008 Sorry, I'm a Mac noob. I tried all the guides here but still to no avail on making my ATI Radeon x700 256mb Device id : 5E4D My native resolution is 1440x900 or at least get it to 1280x768 or something higher than 1024x768. Whenever I install ATIScript.z0rz.v0.2.zip and Callisto. It would work until I try to change resolution which gives me a black screen. Hope you guys can help me. Thanks. I'm running iATKOS v2.0i Mac OS X 10.5.2. Specs Intel Pentium D 3.20 GHz Asus P5LD2 Deluxe Hitachi 750GB SATA II 2GB DDR2 Memory Link to comment Share on other sites More sharing options...
ghio Posted September 22, 2008 Share Posted September 22, 2008 <br />I need some help.<br />Would someone with non working ATI PCIe card try the following command:<br /><font face="Courier New">ioreg -b -x -l | grep pci1002,<br /></font><br />On my machine the output is:<br /><font face="Courier New"> | | | | | "compatible" = <"pci1462,78a","pci1002,5e4b","pciclass,030000"><br /> | | | | "compatible" = <"pci1462,78b","pci1002,5e6b","pciclass,038000"></font><br /><br />I am looking for a method to determine the ATI device ID in the command line. If this doesnt work any ideas?<br /><br />Regards,<br /><br />Gabor<br /><br /><br /><br /> hello, my device is "pci1179,ff02","pci1002,5653","pciclass,030000" what can i do to make it work ? thanks! Link to comment Share on other sites More sharing options...
pros Posted October 18, 2008 Share Posted October 18, 2008 Sorry, I'm a Mac noob. I tried all the guides here but still to no avail on making my ATI Radeon x700 256mb Device id : 5E4D My native resolution is 1440x900 or at least get it to 1280x768 or something higher than 1024x768. Whenever I install ATIScript.z0rz.v0.2.zip and Callisto. It would work until I try to change resolution which gives me a black screen. Hope you guys can help me. Thanks. I'm running iATKOS v2.0i Mac OS X 10.5.2. Specs Intel Pentium D 3.20 GHz Asus P5LD2 Deluxe Hitachi 750GB SATA II 2GB DDR2 Memory There's one more noob =) me! Help us please =) Link to comment Share on other sites More sharing options...
Stefano Posted October 29, 2008 Share Posted October 29, 2008 Hey all i've tryed a lot of ATIRadeon9700.kext builds... I've found a "working" but UNSTABLE solution for OS Leo 10.5.5, using 10.5 BETA i386 build There is a callisto patch for Acer 5020 LCD Panel dotclock bundled into. I hope some one can help to make it "stable" PS: may be you need to boot with "-s" and manually load the kext using: kextload -t ATIRadeon9700.kext Info: 10.5.5 Turion 64 ml34 using speedstepkernel from kabyl X700 128MB 0x1002 0x5653 with fixed dotclock on callisto download link: Download 10.5 beta patched ATIRadeon9700 for X700 Thank you Link to comment Share on other sites More sharing options...
loujob Posted November 2, 2008 Share Posted November 2, 2008 Any working solutions to atleast change the resolution in 10.5.5 with an x700 pro 256 MB Device ID 0x5e4b Link to comment Share on other sites More sharing options...
electroperc Posted November 8, 2008 Share Posted November 8, 2008 Any working solutions to atleast change the resolution in 10.5.5 with an x700 pro 256 MB Device ID 0x5e4b try my guide Link to comment Share on other sites More sharing options...
n_it_tech Posted November 15, 2008 Share Posted November 15, 2008 "I have x200 M" How dose it work? Please! Link to comment Share on other sites More sharing options...
Lostgame Posted November 19, 2008 Share Posted November 19, 2008 Anybody got luck with the x300 in Leopard? Very curious. Got x300 mobile here on a dell D610. Works perfect in 10.4.11. Link to comment Share on other sites More sharing options...
Shuky Posted December 1, 2008 Share Posted December 1, 2008 Hi, i have x700 Pro 128 Mb on my ideneb 10.5.5 and everything works but graphics card...can enybody suggest me what kext and what operations must be performed to x700 works?! My comp is x2 3600+,dfi nf4 ulltra II M2, 3 Gb DDRAM2,320 Seagate. I successfuly install kext for ethernet and it works. nForceLAN_0.62.3.kext <a href="http://forum.insanelymac.com/index.php?act=attach&type=post&id=37188" target="_blank">http://forum.insanelymac.com/index.php?act...st&id=37188</a> it works whit that url below http://forum.insanelymac.com/index.php?showtopic=63132 Link to comment Share on other sites More sharing options...
lunux Posted December 9, 2008 Share Posted December 9, 2008 WORKS on all old ATI RADEON X under 1000 also X200 xpress native resolution !!! please change your ID card in kext or visit my post http://forum.insanelymac.com/index.php?sho...33173&st=20 working kext for ATI radeon ID 5462 , if you use it please change before your card ID in Callisto, Atiradeon kext some problem for movie and coverflow. ATIQECIX600 http://rapidshare.de/files/41032030/ATIX600QECI.rar.html Link to comment Share on other sites More sharing options...
jam007 Posted December 28, 2008 Share Posted December 28, 2008 Hi all! Apparently QE/CI doesn't work as of today on Leo( 10.5.x) in ATI x850 and below. I've checked . You can change resolution and everything. If anybody finds a way of making it work you will a hero! Link to comment Share on other sites More sharing options...
Daniel G Posted January 23, 2009 Share Posted January 23, 2009 i wanna know if it's working for this card: ATI Radeon XPress 1100 0x59751002 Tnx, Daniel Link to comment Share on other sites More sharing options...
archond Posted January 27, 2009 Share Posted January 27, 2009 Hi! I am this noteboock: Asus F7SE-7S031C Processor & Cache Memory Intel® Core™2 Duo Processor T8300 : 2.4 GHz , 3MB On-Die L2 Cache. FSB: 800MHz Chipset_test Mobile Intel® PM965 Express Chipset +ICH8M Main Memory DDR2 667 MHz SDRAM, 3GB SDRAM Display 17" WXGA+/WUXGA Video Graphics & Memory ATI Mobility™ Radeon® HD 3470, External 256MB VRAM Hard Drive 2.5" 9.5mm SATA 250GB,5400rpm Optical Drive 5.25" , 12.7mm Combo: DVD Super Multi Double Layer: Card Reader 8-in-1 card reader: SD,MMC,MS,MS-Pro,xD,mini SD w/ adapter,MS-Duo,MS-Pro Duo via adapter Video Camera 1.3 Mega Pixel web camera Fax/Modem/LAN/WLAN Integrated Intel® High Definition Audio chip ( Azalia) compliant MDC fax/modem and 10/100/1000 Base T Built-in Bluetooth™ V2.0+EDR Intel® Wireless WiFi Link 4965AGN LED Status Indicator Power-on/Suspend Interface 1 x Express card 1 x Microphone-in jack 1 x Headphone-out jack (S/PDIF) 1 x VGA port/Mini D-sub 15-pin for external monitor 5 x USB 2.0 ports 1 x IEEE 1394 port 1 x RJ11 Modem jack for phone line 1 x RJ45 LAN Jack for LAN insert 1 x HDMI 1 x E-SATA I'm tried xxx 10.5.6 leo... and finali instaled ,on reboot this soft- freeze ,only with comand : cpus= 1 -f -v - legacy i'm enter in safe mode but not in normal mode! (mi english is not very good -excuse me for this!) Please help me in this problem what i am need to using !? Thank's! Link to comment Share on other sites More sharing options...
HaNkx86 Posted February 1, 2009 Share Posted February 1, 2009 Hey Guys, i'm running iDeneb 10.5.5 on my notebook. It works quite good but i wasn't able to get my Ati x700 Mobility working properly until now, i tried to modify the AtiRadeon9700.kext serveral times but never with success. It would be very kind if someone would post a working .kext so i can run it properly. In Advance HaNk... Link to comment Share on other sites More sharing options...
Fireblade Posted February 4, 2009 Share Posted February 4, 2009 Hey Members, is there anything new about coming along with the ATI Radeon X700 (x5653)? QE/CI work great on 10.4.11. But changing the resolution doesnt. I've installed the koverg patch 0.2. So, QE and CI work. I've tried to change the resolution by editing the com.apple.boot.list but this also didn't work. Than I tried to enter it in the Darwin Boot-Selector also without success. I can't change the resolution in the System Preferences and using the Tool SwitchResX also didn't work. I've tried also the Callisto driver. There I can change the resolution, but than I've got flickering horizontal lines. I've read all the 45 sites off this topic. It seems, there is no solution, to get a resolution off 1280x800, isnt it? Thanks for your advice in advance! Link to comment Share on other sites More sharing options...
stressi Posted February 18, 2009 Share Posted February 18, 2009 Fireblade, I have the same situation =( can someone help us? Link to comment Share on other sites More sharing options...
alex65 Posted March 20, 2009 Share Posted March 20, 2009 Hey Members, is there anything new about coming along with the ATI Radeon X700 (x5653)? QE/CI work great on 10.4.11. But changing the resolution doesnt. I've installed the koverg patch 0.2. So, QE and CI work. I've tried to change the resolution by editing the com.apple.boot.list but this also didn't work. Than I tried to enter it in the Darwin Boot-Selector also without success. I can't change the resolution in the System Preferences and using the Tool SwitchResX also didn't work. I've tried also the Callisto driver. There I can change the resolution, but than I've got flickering horizontal lines. I've read all the 45 sites off this topic. It seems, there is no solution, to get a resolution off 1280x800, isnt it? Thanks for your advice in advance! If you are still interested, PM me an e-mail and i will send you patched callisto 06, for changing resolution and 9700.kext to reconnect FrameBuffer Link to comment Share on other sites More sharing options...
Jabb3r Posted March 24, 2009 Share Posted March 24, 2009 Hi there. I just decided to try your patch because I couldn't get OpenGL working right, but now i can't get CI or QE either. I previously followed flashGX's guide and did get to the same stage as himself when a OpenGL app was ran anyway (transparency on top bar etc) My card is an X600 and device id was 3150 as stated, but nothin seems to work since followin your instructions, but I had a think and one of the steps in flashGX's guide was..... 5. The next step is to navigate to /System/Library/Extensions/ . Inside there, right click on the kext: ATIRadeonX1000GLDriver.Bundle and click Show Package Contents. Go into the contents folder then the MacOS folder and there will be a file called ATIRadeonX1000GLDriver. Copy this to your desktop. Once on your desktop, Rename the file to this EXACTLY. ATIRadeon9700GLDriver. Then copy the file and navigate back to /System/Library/Extensions/. This time right click on ATIRadeon9700GLDriver.Bundle and go Show package contents. Move through the contents folder to the MacOS folder and paste the file there. It will ask for a password and make sure you replace the file!!!! I didn't really know why I had to do that, but I did it anyway. My question is do you think that step could effect how your patch works on my sytem at all? I've also got his callisto kexts installed which work great also, but would any of that cause conflicts? Heres the guide http://www.insanelymac.com/forum/index.php...=129619&hl= Thanks Link to comment Share on other sites More sharing options...
samsunlu55 Posted April 14, 2009 Share Posted April 14, 2009 We have to setup 2 components: 1. 2D Driver (ATIRadeon9700.kext) 1.1) Update the Info.plist XML file with your hardware ID 3D Driver (ATIRadeon9700GA.plugin) 1.2) Update the Info.plist XML file exchange IONVDRVFrameBuffer with CallistoFB 2. LCD panel ModeLine for 1280x800 (Callisto 006 Patched) Install Callisto 006 patched in the easy way like other extensions. How to patch yourself Callisto 006 binaries: 2.A) You need to know the RIGHT Modeline of your Flat LCD panel (you can read it on Linux Xorg log output, easy and clear) May be (dot clock frequency): 71250 71500 71510 2. Find Callisto 006 already patched binary at addres 0x490E 2.C) Perform some numeric operations: 71250 Decimal to HEX = 0x00XXYYZZ Reverse the BYTES: ZZYYXX00 Write it from address 0x490E 2.D) Ready now you have the patched Callisto binary copy it into MacOSX Extensions folder clear cache and reboot Tip: if you read always 71250 on callisto dump at boot do not warry this is not updated. Warning: look at callisto 006 binary at address 0x490E you must find some like 71xxx decimal value, if you didn't find this you are using wrong binary I found this on the Web! This is exactly the solution for ATI X700 ( 5653 ) M26 users with a Laptop! I need 1280x800 Resolution! How we can apply this Patch to the Callisto B6 Binary! I dont know about Hex editors :-(( Please help us noobs! Link to comment Share on other sites More sharing options...
Recommended Posts