Jump to content

Kernel Panics in 8F1111

maxxuss

By maxxuss,
in OSx86 10.4 (Tiger)

 Share
69 posts in this topic

Recommended Posts

bballkid590
bballkid590
Posted
Posted

well i tried installing and i still get the same kernel panic as in my pic above. so if anybody or maxxuss can help maybe have a patch that would be great. Thx

 

btw: here's my system specs

 

Dell 8400

P4 SSE3 3.4GHZ

1gb DDR2 Ram

DVD-ROm

Philips DVD+-RW

SATA HDD

Link to comment
Share on other sites
39thRonin
39thRonin
Posted
Posted
well i tried installing and i still get the same kernel panic as in my pic above. so if anybody or maxxuss can help maybe have a patch that would be great. Thx

 

btw: here's my system specs

 

Dell 8400

P4 SSE3 3.4GHZ

1gb DDR2 Ram

DVD-ROm

Philips DVD+-RW

SATA HDD

 

Whoa! You and I have the exact same box - same chip, same ram, SATA HDD, but different DVD (mine is a pioneer I moved from an old p3 as OSX didn't like the one dell sent originally). I guess I'll wait on burning another dvd eh?

 

Looks like you got a bit further along in the boot process than I did - my kernel panics right after the kexts are read - so roughly after about four or five lines are on the screen.

 

Is this with the kernel (test3 I think) that kday mentioned above?

Link to comment
Share on other sites
re-book
re-book
Posted
Posted

Since 8f1099 I can't boot my machine HP-dc7100 which has a TPM.

(915G / 3 Ghz Pentium / PAE / HT / SSE3)

Not native and not in VMWARE. It is the same with 8f1111.

The error is allways the same :

"Unable to find driver for platform: "ACPI"

With 8f1099 I tried a lot, the last thing I did test was the Maxxuss ppf 1.1 a.

With the bootloader patch the boot behavior changed to what former was known as "PAE-Error", reloading the boot-menu ( happens with all kernels).

With 8f1111 I just applied the oah-files and removed the extensions-folder and the file extensions.mkext. I tried a lot in the bios - disabling / enabling acpi and internal ports, devices, drives e.c.t.:

What am i missing.

 

Thank you for your help

 

 

<Boot messages for Maxxuss (boot -v with 8f1111)>:

_____________________________________________

 

hi mem tramps at 0xffe00000

PAE enabled

standart timeslicing quantum is 10000 us

vm_page_bootstrap: 254877 free pages

mig_table_max_displ = 71

CPU identification: Intel® Pentium® 4 CPU 3.00GHz

CPU features: FPU VME .....PAE...SSE3

HTT:1 core per package; 2 logical cpus per package

CPU extended features XD EM64T

Enabling XMM register save/restore and SSE/SSE2 opcodes

[RTCLOCK] frequency 2990000000 (2992357340)

panic(cpi 0 caller 0x003998EEF) Uable to find driver for this platform: "ACPI".

 

Debugger called: <panic>

Backtrace, Format -Frame: Return Address (4 potential args on stack)

0x131e3e04 : 0x128b42 (0x3b8e68 0x131e3e28 0x130c68 0x0)

0x131e3e44 : 0x398eef (0x3dbc30 0x1b617a0 0x131e3e74 0x1b67fc0)

0x131e3e64 : 0x37cd26 (0x1b4bc00 0x1b4bc80 0x1 0x3ad7eb)

0x131e3ec4 : 0x37e5a5 (0x1b4bc80 0x1b4bc00 0x1b67fc0 0x1b64580)

0x131e3f44 : 0x37de15 (0x1b4bc80 0x1b45080 0x8 0xffffffff)

0x131e3f94 : 0x37f56a (0x1b4bc80 0x0 0x1b616c0 0x0)

0x131e3fd4 : 0x196465 (0x1b616c0 0x0 0x1b59168 0x133b78) Backtrace terminated-invlid frame pointer 0x0

 

Kernel version:

Darwin Kernel Version 8.3.1: Wed Nov 2 21:12:54 PST 2005; root:xnu-792.7.56.obj~6/RELEASE_I386

 

ethernet MAC address: 00:00:00:00:00:00

ip address: 0.0.0.0

Waiting for remote debugger connection.

kdp_poll: no debugger device

 

</ end bootmessage>

Link to comment
Share on other sites
quixos
quixos
Posted
Posted

cpuid 3b patch working great maxxus. xbench down 20% but certainly doesn't seem any slower here in userguiland. thanks. :(

 

issues with 8F1099 AC97 kext sound stuttering, and quicktime artifacts. might not be of interest to you, but information. :)

 

Asrock 915gl p4 3.0 Northwood

too many smilies? i don't think so! :)

Link to comment
Share on other sites
GrandMasta
GrandMasta
Posted
Posted

Well after some google searching.. I have found that setting vmware to use my iso to boot from is Causing my SAM Multimedia Errors. Mounting the iso using Daemon tools then setting VMware to use the daemon drive to boot from has gotten me into the Installer. Woohoo

Link to comment
Share on other sites
FancyNatra
FancyNatra
Posted
Posted

with test2 and test3 i can not install it natively just in vmware.

finally with test3b i can install it natively, but after install when i tried to boot in osx i got the same kernel panic above...(EIP 0x00192a93)

 

Asus P4800SE, 3GHz (Northwood), SSE2, noNX,ATA,1Gb Ram.

Link to comment
Share on other sites
VooD
VooD
Posted
Posted

I still got the same error with test3 kernel :(

 

crashtest35rj.th.jpg

 

I865, P4 northwood, Radeon 9600

 

Edit: oops, I didnt notice Maxxuss updated to test3b. I´ll give a try asap. (sorry, but I didnt found this new thread til now)

Link to comment
Share on other sites
VooD
VooD
Posted
Posted
with test2 and test3 i can not install it natively just in vmware.

finally with test3b i can install it natively, but after install when i tried to boot in osx i got the same kernel panic above...(EIP 0x00192a93)

 

Asus P4800SE, 3GHz (Northwood), SSE2, noNX,ATA,1Gb Ram.

 

When you replace mach_kernel in the iso you are only replacing the kernel used in the installation process.

Once installed you´ll have to replace again the kernel in your hard disk either using transmac or a working osx system.

Link to comment
Share on other sites
rizzopro
rizzopro
Posted
Posted

Hi All...

I just creratded a new ISO using Maxxuss's patches including the new test3

that was announced on his website, I couldnt change the permissions simply

beacuse I dont know how..But..I was able to install it on my Dell 4700 and

when I tired to boot from the HD it rebooted itself. I know Im close..if anybody has a way to change those permissions in laymens terms, I think that might do it.

Thanks!

 

I also tried booting into single user mode (-s) but it reboot itself before I could do anything.

Link to comment
Share on other sites
itmancan
itmancan
Posted
Posted

Hi, Great Work First of All MAXXUSS.

 

using 10.4.1 now,, tryin to do a fresh install of 10.4.3 8f1111 ,

No more kernel panic after using mach_kernel.cpuid , but i now get a waiting for root device error.? how can i solve this

 

osx 10.4.1 + 10.4.3 userland on 40gb ATA100 on nf4 IDE controller.

A64 X2 3800

DFi LP nForce4 Ultra D

Sapphire X800XL PCi-E Ven1002Dev554D

Lan works PCI Card Realtek 8139

sound works onboard AL860 or somthink ,edited kext

ati kext loads, no Quartz :)

Link to comment
Share on other sites
FancyNatra
FancyNatra
Posted
Posted
When you replace mach_kernel in the iso you are only replacing the kernel used in the installation process.

Once installed you´ll have to replace again the kernel in your hard disk either using transmac or a working osx system.

 

 

i didn't know that. thx!! :)

Link to comment
Share on other sites
VooD
VooD
Posted
Posted (edited)

8F1111 working :)

No more kernel panics.

 

Here´s my complete cpu info:

24wb.th.png

 

But the system seems a bit inestable:

 

- If you click Preferences button in Network panel the application crashes, and if you try to get a report the reporter itself crashes.

- Itunes shows error -50 after the license screen.

- The sounds stutters all the time (sound-silence-sound-silence....)

- Safari still not as fast as in first osx86 version

- Graphical glitches still present

- Also the system believes I have a dual cpu system and I haven´t, It´s just a 2.6 HT northwood @ 3.2. Previously never reported both HT virtual proccesors as real cpus, they were showed in the activity monitor, but system info reported them as a single cpu.

12qo.th.png

 

On the other hand, applications loads blazing fast (not 100% sure If the ide driver wasnt working for me in previous versions). Also OpenGL seems to work better (snes9x now works, and quake3 x86 loads til the key request screen). Btw Altivec emulation seems to be working...or at least Altivec Fractal Demo works fine (but slow...0.5 gflops on my p4 3.2, whereas on a g4 450 scores 1.5 gflops)

 

I´ll test a bit more and see if I can find any other problem.

Edited by VooD
Link to comment
Share on other sites
Sudar
Sudar
Posted
Posted
a lot of powerpc software does not work: ms office, stuffit expander etc.

I say if you have "near-to-dev" system and CPU with or w/o NX the 8f1111 build is the best for you.

If you have some problems with system or apps please post also your hardware and the reports of kernel panics and whatever apps say. It's for maxxuss and folks who can fix such issues.

Like ppl do in this branch:

http://www.win2osx.net/forum/showthread.php?t=1870&page=28

Link to comment
Share on other sites
xtraa
xtraa
Posted
Posted (edited)

Just a note for those who have trouble with installing:

 

If you get a SAM Multimedia error looking like the post from GrandMasta (see ^^) it is most likely caused

by a bad medium error. In other words, your DVD is f***ed up. So try to burn it again on another DVD. I would

suggest to take a DVD-RW.

 

If your hardware supports SSE3, NX and PAE, you can do an UPGRADE. This is nice, because it will keep

all your settings and programs, and you do not have to apply any post fixes (e.g. PS2, IOATA). Just click on

update and costumize during install.

 

I recomment to do the complete patching and converting in OSX.

 

That means:

 

1. open the terminal and type sudo -s, then login

 

2. let's convert the dmg to an iso by typing

 

hdiutil convert /Users/TYPE_YOURNAME_HERE/Desktop/macosx_10.4.3_8f1111_for_dtk_userdvd.dmg -format UDTO -o /Users/Tekno/Desktop/macosx_10.4.3_8f1111_for_dtk_userdvd.iso

 

3. now we will mount the macosx_10.4.3_8f1111_for_dtk_userdvd.iso.cdr as a writable DVD, so that we can

copy over the patches. Do this by typing

 

hdiutil attach -readwrite /Users/TYPE_YOURNAME_HERE/Desktop/macosx_10.4.3_8f1111_for_dtk_userdvd.iso.cdr

 

4. Apply the patches and instructions, that you will find here in the WIKI and

 

5. burn it with diskutil located in your OSX Application>Tools folder.

 

Then you should be done. :(

 

I know this has been written somewhere before, but I think this could be helpful to post twice, just for people

who are still searching for it :D

Edited by xtraa
Link to comment
Share on other sites
re-book
re-book
Posted
Posted
Just a note that Maxxuss' original patches worked on my HP 7100 (someone posted about it a few up). I did the install via VMWare and then booted natively after, though. 520 Pentium.

Hi,

 

did you report about this configuration:

 

MSI 945G Neo-F, Pentium-D 830, 2GB memory

Working 100% (video, sound, ethernet)

 

or about a HP dc-7100 with a original mainboard form HP (i915G with TPM) ?

Can you send me your bios settings please ?

 

Thankx

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...