146 replies to this topic

[snobrd4life]

hey i tryed this package in 10.4.8 and everything was awesome! it loaded right up and i had QE/CI but when i tried loading it in 10.4.6, all i got was resolution changing ability.... any help?

thanks

[sliverriver]

hey there

i have a geforce fx go 5650
is this supported too ?

and on which installation has the patch to be done ? 10.4.6, 10.4.7 ? 10.4.8 with 8.4.1 kernel ?
didn`t get that.


thanks for the hints

cu

[tokra128]

Prasys - where is the 5600 support ?

[rwjohnst]

WIll this work with a 10.4.1 install.....
I tried it...and the system never gets past the mac booting screen....It chugs and chuggs on the hard drive....
can't even get it to safeboot....

I noticed that geforce developer kexts are in the 10.4.1 deadmoo extensions directory....could I just modify those to get the exsisting ones to work?
also I have to remove all of the intel drivers as well....

useing an emachines
intel d845gvsr
celeron d with sse3
512MB

[seanbperiod]

rwjohnst, on Jan 8 2007, 03:10 PM, said:

WIll this work with a 10.4.1 install.....
I tried it...and the system never gets past the mac booting screen....It chugs and chuggs on the hard drive....
can't even get it to safeboot....

I noticed that geforce developer kexts are in the 10.4.1 deadmoo extensions directory....could I just modify those to get the exsisting ones to work?
also I have to remove all of the intel drivers as well....

useing an emachines
intel d845gvsr
celeron d with sse3
512MB

search and you will find your answer

[tronica]

I'm running 10.4.7, and installed this driver. and restarted and I can change resolution now, however i don't have CI or QE, do i need to edit something. Thanks

[nody]

Prazys would it it be to much to ask to make work with nVIDIA GeForce FX Go5700?? I need it badly, since i can´t make it work with the 10.4.8 with Titan or Natit, i´m really fresh meat when it comes to OsX  , as oyu can see on my forum info,

Edited by nody, 11 January 2007 - 08:02 PM.

[nody]

First of all, sorry bout the double post. But i´ve been lookin around and found the LaptopDisplay treath from np_ , and since you know how to... is it possible that my probs come from using a laptop?? I have a Acer Aspire 1714SMi, with the nVidia Card, and all my test´s with Titan or Natit resulted in a black and, then white, screen for Titan, with ( i supose so...) Os running in the background, and Nattit a totally black screen in the same conditions. My question is... Would some how youre installer consider this? Or dumb me should stick to windows??  

just for the info:

Chipset Model: NVIDIA GeForce FX Go5700
  Type: Display
  Bus: PCI
  VRAM (Total): 128 MB
  Vendor: nVIDIA (0x10de)
  Device ID: 0x0348
  Revision ID: 0x00a1
  Displays:
Display:
  Resolution: 1280 x 1024 @ 60 Hz
  Depth: 32-bit Color
  Core Image: Not Supported
  Main Display: Yes
  Mirror: Off
  Online: Yes
  Quartz Extreme: Not Supported

Edited by nody, 11 January 2007 - 11:06 PM.

[DiaboliK]

@ nody have you tried adding your device id (which is: 0x034810de) to nvdaresman.kext, geforce.kext and the appropriate nvdanhalXX.kext?
thats after an install of titan/natit but before a restart.

[nody]

DiaboliK, on Jan 12 2007, 12:33 AM, said:

@ nody have you tried adding your device id (which is: 0x034810de) to nvdaresman.kext, geforce.kext and the appropriate nvdanhalXX.kext?
thats after an install of titan/natit but before a restart.

That´s all i´ve done, put my ID on Geforce, nvdaresman, and on nvdanhal kext´s. the nvdanhal i did de nvdanhal40, and also 30 & 40 @ the same time, still got my black & white, and with Natit my Totallyyy Black screen. Should i go for the 10 & 20 to?? I´m really lost when comes to Mac and modding kext. Never done nothing of the kind with it.
Also Dense in *http://forum.insanelymac.com/index.php?showtopic=35422&st=80* post#89 says you do not change GeForce.kext or it will crashes you´re system, so since there´s no really how to for everybody it´s getting very confusing and frustating, and also seeing all the sucess on other´s makes us poor fiew sad sad sad.ehehehehehehe.

Edited by nody, 12 January 2007 - 02:41 PM.

[DiaboliK]

to get my 7600gt and 7600gs working all i editied was geforce.kext so.... beleive who you want to believe.

did you refer to this?

Quote

Touching IONDRVSupport is what is causing the crash.

read twice edit once

Edited by DiaboliK, 13 January 2007 - 06:27 AM.

[nody]

DiaboliK, on Jan 13 2007, 06:24 AM, said:

to get my 7600gt and 7600gs working all i editied was geforce.kext so.... beleive who you want to believe.

did you refer to this?
read twice edit once

I´ve never touch that, and at the moment i´m back to 10.4.7, got a bit tired of formating the all chibanga. And i´m usin macnvidia kext, i don´t know how to use lines of command at -s startup to put every thing back, if something guet´s wrong again. So as you may imagine after about 20 formats i´m just a litle big tired.

just crying my self a litle see if some good soul will make me a ready install package   , or to say the least give a complete how to that i could follow trough to get it done   .

wishing never did no arm... i guess...

[nody]

Sorry for the long post everyone

Ok Mr Diabolik since my last post i´ve not be able to rest my mind, i´m not the kind to quit, but if it´s not askin to much i´d like to ask you for some assistance and correct me if i´m wrong on my line of thinkin:

To get Natit.kext to work (lets see if i have all in the right place...)

First i have to correct my ID from <dict>
<key>name</key>
<string>GeForce FX Go5700</string>
</dict>
<key>0x034C</key>
<dict>
to :<dict>
<key>name</key>
<string>GeForce FX Go5700</string>
</dict>
<key>0x0348</key>
<dict>

Then Get GeForce.kext and change-
                     <key>IOPCIMatch</key>
<string>0x000010de&amp;0x0000ffff</string>

to:
                     <key>IOPCIMatch</key>
<string>0x034810de&amp;0x0000ffff</string>

Then get NVDAResman.kext, and NVDANV30Hal.kext and put everything on Extensions. I say NVDANV30Hal.kext since it got´s :

0x034010de&amp;0xfff0ffff and i´guessin here, but that´s the reference to my card. Do i live it like that, or should i change that reference to match my card ID?

After all this, i get openglframework fron the intel package from apple and place it in the right place. Do nothing to IONDRVSupport.


And now -  NVDANV10Hal.kext,NVDANV20Hal.kext and NVDANV40Hal.kext i remove from the extensions folder.

After that is the part that i need some help:

in terminal i do    sudo chown -Rf root:wheel GeForce* NVDA* Natit*
                         sudo chmod -Rf 755 GeForce* NVDA* Natit*
                         diskutil repairPermissions /
And Reboot.

Now Time to make some questions:

-Should i go also sudo  chow and sudo chmod to NVDANV30HAL, or no??
-Can i test this with 8.4.1 kernel or will natit only work with 8.8.1??

-If something should go wrong what to do on reboot F8 -s ??

Is it     rm -r /System/Library/Extensions.kextcache
          rm -r /System/Library/Extensions.mkext
          kextcache -k /System/Library/Extensions/ ????


and should i rm Natit.kext also?? and if so before the Extensions.kextcache isn´t it??

My last question is if all this is correct and in the correct order, if something goes wrong how will my machine load Os if doesn´t have any kext to my display??

Edited by nody, 13 January 2007 - 08:49 PM.

[El Matador]

Man!! I Couldn´t get this working!! I have a Leadtek agp fx 5200 (id 0322, vendor 10de), and i tried "pure" titan install, your installer, the 11mb installer of the another guy in this forum, and the only thing i get is resolution changing. I have jas amd intel 10.4.8 with jas ppf, and kernel 8.8.1. Do anyone know what i can do?

[drho2004]

i have a 5200 that came with wit a HP Media Center PC m370n that i was given. device 0x0322 . i tried the installer, it gives me all the resolutions--im running 1600x1200@60hz on my samsung SyncMaster 204B---but no QE/CI...im running Jas 10.4.6, i tried the re-seed 10.4.8 but it was no boot. anything i can try??   i have another hackitosh and it does have QW/CI enabled (GMA900) and it ROCKS! now if i can onlyt get this one.... :-P

[Corona]

To all those getting res changing and not QE/CI, have you checked AGPGart? I haven't got my new card to try this yet, but from what I've seen you can't use AGPGart with Natit/Titan, so for acceleration to work try moving AGPGart.kext out of extensions folder.

Corona

[Jorrel]

is this Installer applicable on version 10.4.6?  

[MacAndor]

Hi guy's I have an Nvidia 6100 Go and it does not work, somebody help me!!!

Please!!!

thx

[GaaraX]

Worked like a charm with my GeForce 5200 FX under OSX 10.4.8 JAS DVD , Thank you Prasys

[alarustic]

I installed this patch but now my machine won't boot even in safe mode.   Is there anything I can do to rescue my install and then how do I get this driver working?

Thanks for any help.