Jump to content
2,188 posts in this topic

Recommended Posts

If I put the FakeSMC and IntelCPU kexts into SLE, then both load without that error:

kextstat -l | egrep -v "com.apple"
   21    1 0xffffff7f8265f000 0xd000     0xd000     org.netkas.FakeSMC (3.5.0) A63F6CAD-05B3-335C-8084-9D034A5E7F83 <11 7 5 4 3>

 

   22    0 0xffffff7f8266c000 0x6000     0x6000     org.slice.IntelCPUMonitor (1.2.0) 306E344D-630E-39CC-B0E7-A0F51C3E8461 <21 7 5 4 3>
 
In Clover I put CPU Type =0x0a05 and FakeCPUID as 0x0506E4 otherwise I can't boot - does this cause any issue ?
 

Attached is a new DarwinDumper with both in SLE

 

Also in post 404, I put a screen shot of AIDA64 sensor, which kext does this chipset belong to ?

 

Thanks !

Slice, do you have any idea why I still can't see CPU sensors even though both FakeSMC and IntelCPU are loaded ?

 

Thanks !

Link to comment
Share on other sites

Slice, do you have any idea why I still can't see CPU sensors even though both FakeSMC and IntelCPU are loaded ?

 

Thanks !

Must works.

0      0    kernel: (kernel) IntelCPUMonitor: [Warning] Unsupported Intel processor found ID=0x55, kext will not load

This is old version of IntelCPUmonitor.kext.

New version does support processor model 0x55.

Link to comment
Share on other sites

Must works.

0      0    kernel: (kernel) IntelCPUMonitor: [Warning] Unsupported Intel processor found ID=0x55, kext will not load

This is old version of IntelCPUmonitor.kext.

New version does support processor model 0x55.

I have tried "HWSensors3v51.dmg" and "Release350.zip".

 

Both are ver 1.2.0. Is this the latest ? If not where can I get the latest ?

Link to comment
Share on other sites

Thanks Slice ! That's working now & I can see CPU temp & speed info.

 

For the motherboard sensors, which kext should I use ? I posted my AIDA64 in post 404

 

And can you please link the latest kext for NVIDIA GTX1080ti stats ?

 

Thanks !

From your AIDA report I see LM78 chip for which we have no kexts.

Fjr Nvidia Pascal test, please, this debug version. There is expected many messages in system.log.

Later I will make release version.

GeforceSensor.kext_2.zip

Link to comment
Share on other sites

From your AIDA report I see LM78 chip for which we have no kexts.

Fjr Nvidia Pascal test, please, this debug version. There is expected many messages in system.log.

Later I will make release version.

attachicon.gifGeforceSensor.kext_2.zip

Thanks Slice !

 

The GeforceSensor works, but I only see the temp GPU0 Proximity. Is this all the info that can be shown ?

 

Oh that's a pity there is no LM78 kext, hopefully someone will make one

Link to comment
Share on other sites

Thanks Slice !

 

The GeforceSensor works, but I only see the temp GPU0 Proximity. Is this all the info that can be shown ?

 

Oh that's a pity there is no LM78 kext, hopefully someone will make one

I study Linux kernel-4.14 for these questions. Still found nothing.

Link to comment
Share on other sites

Attached is the data sheet

 

Thanks

Thanks,

this chip differs from 6776. The kext must be rewritten.

HD 7790

Picos-Mac-Pro:radeon pico$ ./RadeonDump1 -n 6b0,c0300014

Found a device of class RadeonPCI: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEGP@1/IOPP/GFX1@0/RadeonPCI

it matched on name "ATY_GPU"

0xc0300014: 0x       0

So this is other family

Test follow

./RadeonDump1 -r 714,7f4

 

 ./RadeonDump1 -n 6b0,c0300e0c

  • Like 1
Link to comment
Share on other sites

Sir recently use seen ur post regarding injecting Machine Id for AGPM.

Sir Ive Injected AGPM For my AMD Radeon HD 7650M via FakeSMC.

Sir I've used MBP 9,2 Board id for CPU and MBP 8,3 board id for GPU PM, sir is it good way for getting PM !

Sir should v Inject SMC key according to CPU Model !

 

The reason m curious is coz in 

MBP 9,2 SMC Key is 2.2f44 and MBP 10,1 SMC Key is 2.6f57 

 

N both have same CPU i.e i5 3210M, so which one should i use ?

 

My Model has SMC Key 2.3f36

 

Sir its very imp  as I've seen some Performance improvement after i played around SMC keys, but i needed ur opinion  :)

 

Sir was the diff between RehabMan FakeSMC(k) n Ur Version of FameSMC !  

 

Edit: Found appropriate thread from Slice Sir :)

Link to comment
Share on other sites

Slice sir can i get uninstall .cmd for HWSensor.pkg :(


There is influence of Machine ID on GPUPM.

But there is no influence of SMC Rev on performance.

Sir wen i change SMC Rev to 2.2f44 i see CPU(i5 3210M) performance 

for example CPU Utilisation,Frequency and Temperature  increases or decrease drastically. Ive noticed it sir :)  

Link to comment
Share on other sites

I wish to announce HWSensors3 revision 75 is available now at sourceforge.net. The link is in my signature.

It includes:

FakeSMC 3.5.0

IntelCPUMonitor supporting CPU up to Kabylake 2.

AmdCPUMonitor

ACPIMonitor for custom monitoring

RadeonMonitor  supporting HD5xxx, 6xxx, 7xxx, R7 2xx, RX4xx, RX5xx and similar

GeforceSensors supporting cards up to Pascal. It has monitoring Core, Shader and Memory clocks.

SuperIO chip monitoring including Fintek, ITE, Winbond, Nuvoton and SMC LPC chips. 

VoodooBatterySMC to show laptop battery voltage and current amperage dynamically.

HWMonitorSMC application to show all these values

as well iStatPro widget

  • Like 12
Link to comment
Share on other sites

Slice, you're the man!

 

I can now read my Radeon RX580 NITRO+ 8GB OC GPU temperatures. I had a little trouble working out where to put the kext's (I put them all in /L/E and changed the permissions and ownership etc.

 

I used the ITEIT87x.kext as I have an old Gigabyte GA-Z77M-D3H-MVP MB and i7-3700 CPU.

 

Will this also work with the HWMonitor app?

 

Cheers, Jim

Link to comment
Share on other sites

@Slice

When i see this in windows sensors dump

 

Hardware monitor AMD ADL GPU
Voltage 0 0.00 Volts [0x1] (GPU)
Power 0 14.99 W (GPU)
Temperature 0 38 degC (100 degF) [0x26] (GPU)
Fan 0 1097 RPM [0x449] (GPU)
Clock Speed 0 634.44 MHz [0x27A] (Graphics)

Clock Speed 1 1750.00 MHz [0x27A] (Memory)

 

and i know you know how to read temp i have to ask you for radeon at least fan speed. Please. :)

Link to comment
Share on other sites

@Slice

When i see this in windows sensors dump

 

Hardware monitor AMD ADL GPU
Voltage 0 0.00 Volts [0x1] (GPU)
Power 0 14.99 W (GPU)
Temperature 0 38 degC (100 degF) [0x26] (GPU)
Fan 0 1097 RPM [0x449] (GPU)
Clock Speed 0 634.44 MHz [0x27A] (Graphics)

Clock Speed 1 1750.00 MHz [0x27A] (Memory)

 

and i know you know how to read temp i have to ask you for radeon at least fan speed. Please. :)

Look please in WIndows if Clock Speed ever changed or there are constants.

Link to comment
Share on other sites

You should see CPU temperature. Skylake-X is supported.

Give me your report by DarwinDumper (no BIOS, no HTML).

 

For motherboard sensors and fans you should choose what chip installed on you motherboard

if NUVOTON -> W386x.kext

if ITE -> IT87x.kext

if Fintek -> F718x.kext

You may know by own eyes or by AIDA64 report.

And the last one is GeforceSensor.kext from my previous post.

 

was searching for this. maybe it would be good to put this in a readme.text in the SuperIO folder...

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...