Jump to content

[SOLVED] Asus ROG laptops with Kepler cards not detecting DP-2 connected LCD display

asus gtx 770m G750

Best Answer AREOS, 20 March 2014 - 04:46 PM

Hi,
@AREOS: I have attached 2 ioreg files in the zip as my laptop acts slightly differently with the NVidia drivers.

When it starts from the vga monitor the internal lcd is not detected. Only the monitor. Thats the ioreg monitor only.
I can then go to displays>detect displays and then it finds the internal lcd also. Thats the ioreg monitor and lcd.

Before on the mac driver the monitor was always found first and then the lcd fired up a couple of seconds later before login.

Hope that helps...


OK is interesting, your eDP port is detected on Display-B, but this maybe caused by the wrong NVCAP info, I check the iMac 13,2 and 14,2 and this machines had only 3 ports A,B,C maybe is because they don't use the internal port as they use eDP too for the display, I have one EFI string to test, this will change the NVCAP to inject the iMacs, and also injects the correct connector type, and display cfg. In my testing I can actually boot with all this info injected and working, but only using Nvidia Web Drivers, I suspect this is caused by my internal connector is LVDS, and the apple drivers doesn't like it. So try this EFI string only using Nvidia Web drivers.

Please report back with IOReg saves to see if the info is injected correctly.

This is the EFI string, and good luck.
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
Go to the full post


  • Please log in to reply
163 replies to this topic

#141
gazzacbr

gazzacbr

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 109 posts

Hi,

@AREOS: well, now thats a coincidence. just last night i downloaded the combo update for 10.9.2 to give it a spin as i read somewhere a mention of graphics changes.

after installing, i patched the kernel, replaced some power kexts but also had to replace the NVDA kexts (what were the changes there?) and now its booting as before from vga only.

i will download the new nvidia drivers tomorrow to see if there is any improvement. 

 

UPDATE: trying on 10.9.2 with new NVidia web drivers did not help. still no booting without vga connected.

when it does start with the vga monitor there is still no multi-monitor support.

ah, checked the NVidia update and it was updated to 331.01.f02 (from f01), multi monitor support is there now.

so i can use NVidia drivers.

but still no booting without vga connected :(

 

still hoping...



#142
AREOS

AREOS

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 287 posts
  • Gender:Male
  • Location:Mexico City

Please share an IORegistry save file using this Nvidia Drivers, you should now have correctly named port 00, port 01, port 02, and port03. In recently tests I manage to inject more info to the Nvidia Drivers so now my card is detected as an EFI card (I say this cause the string "noEFI" is not there now) and this gives me the NVCAP change from <05 00 00 00 00 00 ff ff ff ff 00 00 00 00 00 0e 00 00 00 00> to <05 01 00 00 00 00 01 00 06 00 00 00 00 00 00 0f 00 00 00 00 00 00 00 00> for you could be useful cause this can give you the right config.

 

Good Luck



#143
gazzacbr

gazzacbr

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 109 posts

Hi,

@AREOS: I have attached 2 ioreg files in the zip as my laptop acts slightly differently with the NVidia drivers.

 

When it starts from the vga monitor the internal lcd is not detected. Only the monitor. Thats the ioreg monitor only.

I can then go to displays>detect displays and then it finds the internal lcd also. Thats the ioreg monitor and lcd.

 

Before on the mac driver the monitor was always found first and then the lcd fired up a couple of seconds later before login.

 

Hope that helps...

Attached Files



#144
AREOS

AREOS

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 287 posts
  • Gender:Male
  • Location:Mexico City

Best Answer

Hi,
@AREOS: I have attached 2 ioreg files in the zip as my laptop acts slightly differently with the NVidia drivers.

When it starts from the vga monitor the internal lcd is not detected. Only the monitor. Thats the ioreg monitor only.
I can then go to displays>detect displays and then it finds the internal lcd also. Thats the ioreg monitor and lcd.

Before on the mac driver the monitor was always found first and then the lcd fired up a couple of seconds later before login.

Hope that helps...


OK is interesting, your eDP port is detected on Display-B, but this maybe caused by the wrong NVCAP info, I check the iMac 13,2 and 14,2 and this machines had only 3 ports A,B,C maybe is because they don't use the internal port as they use eDP too for the display, I have one EFI string to test, this will change the NVCAP to inject the iMacs, and also injects the correct connector type, and display cfg. In my testing I can actually boot with all this info injected and working, but only using Nvidia Web Drivers, I suspect this is caused by my internal connector is LVDS, and the apple drivers doesn't like it. So try this EFI string only using Nvidia Web drivers.

Please report back with IOReg saves to see if the info is injected correctly.

This is the EFI string, and good luck.
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


#145
gazzacbr

gazzacbr

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 109 posts

@AREOS: you da man!!!! :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim:

 

well, i am typing from my 3D 120hz Asus screen with latest NVidia web driver, 331.01.01f02 and your efi string. System is 10.9.2

Card fully recognised and all working :)

I assume i have full accelleration as chess plays correctly and dashboard has wave effect.

FYI I have attached an ioreg of the system working now.

 

Hopefully this is a generic solution and puts Hacks another notch up for kepler and 3D 120Hz.

 

Nice one. Thanks for not giving up.

Attached Files



#146
TeoTheCool

TeoTheCool

    InsanelyMac Protégé

  • Members
  • Pip
  • 33 posts

Wow, this really is awesome!

 

@AREOS:

Do you think you can work your magic on my G55VW too?



#147
AREOS

AREOS

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 287 posts
  • Gender:Male
  • Location:Mexico City

@AREOS: you da man!!!! :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim:

 

well, i am typing from my 3D 120hz Asus screen with latest NVidia web driver, 331.01.01f02 and your efi string. System is 10.9.2

Card fully recognised and all working :)

I assume i have full accelleration as chess plays correctly and dashboard has wave effect.

FYI I have attached an ioreg of the system working now.

 

Hopefully this is a generic solution and puts Hacks another notch up for kepler and 3D 120Hz.

 

Nice one. Thanks for not giving up.

 

Great!!!, I was right after all, there are some test to get all working, I mean for understand a little bit more. Please boot using Apple Nvidia Drivers and if it works, share and IORegistry explorer save.

 

I have a lot more good stuff for the G750, CPU power Management full working, Audio with 2.1 sound using AppleHDA, Keyboard Backlight (thanks to EMlyDinEsH and his Elan Driver even Auto off feature works!!), Brightness backlight control for the display, so please PM me for further instructions.

 

Good Luck

 

Edit: Ohh I almost forget to tell you, please mark the thread as solved.

 

Wow, this really is awesome!

 

@AREOS:

Do you think you can work your magic on my G55VW too?

 

We can try, please share an IORegistry save file. Is your machine using 120Hz Display? 

 

Good Luck to all



#148
gazzacbr

gazzacbr

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 109 posts

Hi, ioreg attached was booting from nvidia drivers.
I am certainly interested in
Brightness backlight control for the display - this is top of the list, i use a brightness slider which give a strange grey glow when turned down
CPU power Management - how to check speedstep etc
Audio with 2.1 sound using AppleHDA - using voodoo now which is ok, i have all sound and mic, is this much better?
Keyboard Backlight - nice to have but i usually have it turned off even in windows

While the display was a problem I didnt really research these other minor problems.

 

I am marking this one as solved :D

new threads can be made for the other stuff.



#149
AREOS

AREOS

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 287 posts
  • Gender:Male
  • Location:Mexico City

Hi, ioreg attached was booting from nvidia drivers.
I am certainly interested in
Brightness backlight control for the display - this is top of the list, i use a brightness slider which give a strange grey glow when turned down
CPU power Management - how to check speedstep etc
Audio with 2.1 sound using AppleHDA - using voodoo now which is ok, i have all sound and mic, is this much better?
Keyboard Backlight - nice to have but i usually have it turned off even in windows
While the display was a problem I didnt really research these other minor problems.

I am marking this one as solved :D
new threads can be made for the other stuff.


Oh I know you are booting using Nvidia Web Drivers, but I need an IOReg using Apple Official Nvidia Drivers, if you are using Clover just enter in Options on Boot menu you will see the NVDA_drv=1 option type enter on it and delete it, type enter again and select return, it will get you back to the boot screen. Select your Mac partition and boot. Take the IOReg and after reboot the Nvidia web driver will load again automatically.

We need a new thread about getting all working on the G750. In your IOReg saves I see you aren't using CPU Power management and with Voodoo you don't get the subwoofer working either.

Good luck

#150
Pahcixam

Pahcixam

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts

Hi,

 

@AREOS: Sometimes ago, you help me with my Alienware M17XR4 to try to make the screen work. I'm in the same situation now. I have a 120HZ screen and a GTX680M. With 10.9.1 I can boot with a VGA screen attached and get full acceleration on external screen and nothing on internal one. With 10.9.2 nothing work. I try VGA, HDMI and internal without success with both drivers (Apple and Web). I boot up removing all NVDA*.kext (not web) and without nvda_drv=1 in order to get to the desktop and make a ioreg dump.

 

For now DMOS is a bit a mess because it's hard to work on it without screen ^^.

 

I hope you can make magic for me.

 

Thanks a lot.

Attached Files



#151
gazzacbr

gazzacbr

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 109 posts

Oh I know you are booting using Nvidia Web Drivers, but I need an IOReg using Apple Official Nvidia Drivers, if you are using Clover just enter in Options on Boot menu you will see the NVDA_drv=1 option type enter on it and delete it, type enter again and select return, it will get you back to the boot screen. Select your Mac partition and boot. Take the IOReg and after reboot the Nvidia web driver will load again automatically.

We need a new thread about getting all working on the G750. In your IOReg saves I see you aren't using CPU Power management and with Voodoo you don't get the subwoofer working either.

Good luck

Hi,

IOReg with Apple drivers will be the same as before?

With Apple drivers and efi string laptop still does not boot from the lcd only and now it actually does not boot with the Apple drivers and a monitor attached.

Its only booting with nvidia drivers and your efi string.

 

Where to start a new thread for the G750?



#152
yisl04

yisl04

    InsanelyMac Protégé

  • Members
  • Pip
  • 29 posts

Great!!!, I was right after all, there are some test to get all working, I mean for understand a little bit more. Please boot using Apple Nvidia Drivers and if it works, share and IORegistry explorer save.

 

I have a lot more good stuff for the G750, CPU power Management full working, Audio with 2.1 sound using AppleHDA, Keyboard Backlight (thanks to EMlyDinEsH and his Elan Driver even Auto off feature works!!), Brightness backlight control for the display, so please PM me for further instructions.

 

Good Luck

 

Edit: Ohh I almost forget to tell you, please mark the thread as solved.

 

 

We can try, please share an IORegistry save file. Is your machine using 120Hz Display? 

 

Good Luck to all

Hello, my laptop is G55VW-DH71 and the display is not 3D. The graphics card is GTX 660M 2G. I want to make the EFI string by gfxutil, but the EFI string doesn't work, I need your help.

The information of my graphics card is below:

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x27d
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	VGA
		supported: VGA         
	ConnectorType:	VGA
	ConnectorNumber: 1 (0x00000001)
	_ConnectorLocation: 1 (0x00000001)
LVDS-0 connected 1920x1080+0+0 (0x27f) normal (normal left inverted right x axis y axis) 344mm x 194mm
	Identifier: 0x27e
	Timestamp:  23226
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       0
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	EDID:
		00ffffffffffff0030e4d90200000000
		00140104902213780a15d59e59509826
		0e505400000001010101010101010101
		0101010101017e3680b070381f403020
		350058c210000018542480b070381f40
		3020350058c210000018000000fe004d
		43364a4e813135365746310a00000000
		000041319e0000000002010a20200030
	SignalFormat:	LVDS
		supported: LVDS        
	ConnectorType:	Panel
	ConnectorNumber: 0 (0x00000000)
	_ConnectorLocation: 0 (0x00000000)
  1920x1080 (0x27f)  139.5MHz -HSync -VSync *current +preferred
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   66.6KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   59.9Hz
  1920x1080 (0x280)   93.0MHz -HSync -VSync
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   44.4KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   39.9Hz
DP-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x281
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)
HDMI-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x282
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	HDMI
	ConnectorNumber: 2 (0x00000002)
	_ConnectorLocation: 2 (0x00000002)
DP-1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x283
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	DisplayPort
		supported: DisplayPort 
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)

and the plist file for gfxutil is below:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key>
	<dict>
		<key>@0,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@0,connector-type</key>
		<data>
		AgAAAA==
		</data>
		<key>@0,device_type</key>
		<string>display</string>
		<key>@0,name</key>
		<string>NVDA,Display-A</string>
		<key>@1,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@1,connector-type</key>
		<data>
		EAAAAA==
		</data>
		<key>@1,device_type</key>
		<string>display</string>
		<key>@1,name</key>
		<string>NVDA,Display-B</string>
		<key>NVCAP</key>
		<data>
		BQAAAAAAAwAMAAAAAAAADwAAAAA=
		</data>
		<key>NVPM</key>
		<data>
		AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==
		</data>
		<key>VRAM,totalsize</key>
		<data>
		AAAAgA==
		</data>
		<key>device_type</key>
		<string>NVDA,Parent</string>
		<key>model</key>
		<string>NVIDIA GeForce GTX 660M</string>
		<key>name</key>
		<string>display</string>
		<key>rom-revision</key>
		<string>NVIDIA GeForce GTX 660M</string>
	</dict>
</dict>
</plist>

So I don't where is wrong, maybe the connector-type or NVCAP, I set @0,connector-type 0x02000000(LVDS) and @1,connector-type 0x10000000(VGA). Please help me, thank you in advance.



#153
beton3009

beton3009

    InsanelyMac Protégé

  • Members
  • Pip
  • 29 posts

what about g75vx with gtx 670 mx brothers/.?????



#154
beton3009

beton3009

    InsanelyMac Protégé

  • Members
  • Pip
  • 29 posts

need help mr areos i don't wont to sel my laptop and i'm stuck at this card status HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP HELP



#155
beton3009

beton3009

    InsanelyMac Protégé

  • Members
  • Pip
  • 29 posts

is this card so dificult ?

 



#156
AREOS

AREOS

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 287 posts
  • Gender:Male
  • Location:Mexico City

Hi,

 

@AREOS: Sometimes ago, you help me with my Alienware M17XR4 to try to make the screen work. I'm in the same situation now. I have a 120HZ screen and a GTX680M. With 10.9.1 I can boot with a VGA screen attached and get full acceleration on external screen and nothing on internal one. With 10.9.2 nothing work. I try VGA, HDMI and internal without success with both drivers (Apple and Web). I boot up removing all NVDA*.kext (not web) and without nvda_drv=1 in order to get to the desktop and make a ioreg dump.

 

For now DMOS is a bit a mess because it's hard to work on it without screen ^^.

 

I hope you can make magic for me.

 

Thanks a lot.

 

Your IOreg is corrupted try one more time using IORegistry Explorer V2, if you got an IOReg save from when you use 10.9.1 it will be great cause I can see what are your ports. Remember Asus Usually gets detected as port02 and Alienware as port 09.

 

 

 

 

Hello, my laptop is G55VW-DH71 and the display is not 3D. The graphics card is GTX 660M 2G. I want to make the EFI string by gfxutil, but the EFI string doesn't work, I need your help.

The information of my graphics card is below:

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
VGA-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x27d
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	VGA
		supported: VGA         
	ConnectorType:	VGA
	ConnectorNumber: 1 (0x00000001)
	_ConnectorLocation: 1 (0x00000001)
LVDS-0 connected 1920x1080+0+0 (0x27f) normal (normal left inverted right x axis y axis) 344mm x 194mm
	Identifier: 0x27e
	Timestamp:  23226
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       0
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	EDID:
		00ffffffffffff0030e4d90200000000
		00140104902213780a15d59e59509826
		0e505400000001010101010101010101
		0101010101017e3680b070381f403020
		350058c210000018542480b070381f40
		3020350058c210000018000000fe004d
		43364a4e813135365746310a00000000
		000041319e0000000002010a20200030
	SignalFormat:	LVDS
		supported: LVDS        
	ConnectorType:	Panel
	ConnectorNumber: 0 (0x00000000)
	_ConnectorLocation: 0 (0x00000000)
  1920x1080 (0x27f)  139.5MHz -HSync -VSync *current +preferred
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   66.6KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   59.9Hz
  1920x1080 (0x280)   93.0MHz -HSync -VSync
        h: width  1920 start 1968 end 2000 total 2096 skew    0 clock   44.4KHz
        v: height 1080 start 1083 end 1088 total 1111           clock   39.9Hz
DP-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x281
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)
HDMI-0 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x282
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	TMDS
		supported: TMDS        
	ConnectorType:	HDMI
	ConnectorNumber: 2 (0x00000002)
	_ConnectorLocation: 2 (0x00000002)
DP-1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x283
	Timestamp:  23226
	Subpixel:   unknown
	Clones:    
	CRTCs:      0 1 2 3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	SignalFormat:	DisplayPort
		supported: DisplayPort 
	ConnectorType:	DisplayPort
	ConnectorNumber: 3 (0x00000003)
	_ConnectorLocation: 3 (0x00000003)

and the plist file for gfxutil is below:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)</key>
	<dict>
		<key>@0,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@0,connector-type</key>
		<data>
		AgAAAA==
		</data>
		<key>@0,device_type</key>
		<string>display</string>
		<key>@0,name</key>
		<string>NVDA,Display-A</string>
		<key>@1,compatible</key>
		<string>NVDA,NVMac</string>
		<key>@1,connector-type</key>
		<data>
		EAAAAA==
		</data>
		<key>@1,device_type</key>
		<string>display</string>
		<key>@1,name</key>
		<string>NVDA,Display-B</string>
		<key>NVCAP</key>
		<data>
		BQAAAAAAAwAMAAAAAAAADwAAAAA=
		</data>
		<key>NVPM</key>
		<data>
		AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==
		</data>
		<key>VRAM,totalsize</key>
		<data>
		AAAAgA==
		</data>
		<key>device_type</key>
		<string>NVDA,Parent</string>
		<key>model</key>
		<string>NVIDIA GeForce GTX 660M</string>
		<key>name</key>
		<string>display</string>
		<key>rom-revision</key>
		<string>NVIDIA GeForce GTX 660M</string>
	</dict>
</dict>
</plist>

So I don't where is wrong, maybe the connector-type or NVCAP, I set @0,connector-type 0x02000000(LVDS) and @1,connector-type 0x10000000(VGA). Please help me, thank you in advance.

 

 

what about g75vx with gtx 670 mx brothers/.?????

 

 

For G55 and G75 users see this, your issue is related to something else http://www.insanelym...king/?p=2007745.

 

Good Luck



#157
Pahcixam

Pahcixam

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts

Your IOreg is corrupted try one more time using IORegistry Explorer V2, if you got an IOReg save from when you use 10.9.1 it will be great cause I can see what are your ports. Remember Asus Usually gets detected as port02 and Alienware as port 09.

 

Hi.

 

Thanks you for taking some time for us. I make a fresh installation of 10.9.1 and make a save with IO Registry Explorer v2.1. I hope this time it'll be correct.

 

You can find it in attachement.

Attached Files



#158
Pahcixam

Pahcixam

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts
Hi.

A little up for Areos. Did you find any solution for me since last week ?

Thank you for your help.

#159
gazzacbr

gazzacbr

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 109 posts

@Pahcixam: maybe better to start a new thread as this one is solved and you dont even have the same laptop...



#160
Rikoshet

Rikoshet

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 123 posts

Hi guys!

How about power management of graphic card? Does it work for you? ANy guide?

Thanks!







Also tagged with one or more of these keywords: asus, gtx, 770m, G750

  Topic Stats Last Post Info

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy