63 replies to this topic

[Babiloe]

First.
you must have an installer. download myhack and 10.8 installer for 8 gb usb. To get 10.8 installer you have a need for a working mac/working hackintosh.
with 10.8 dmg installer is copied into 8gb usb using disk utility. my hack installer then should installed to usb partition! not your friend mac partition!
put alanyn dsdt into it! and the u36sd kexts including nullcpumanagement.kext, AtherosL1c.kext  to /Extra/Extensions in usb. also alanyn smbios.plist into /Extra/Extensions
ssdt.aml is cpu dependent, and different. if 2410 you can use alanyn others please seek.

i am using mbr. so the hdd was formated using mbr as myhack usually do.

each partition on should be primary. for me i have  partition 1 XP, primary, partition 2: Win7, partition3: Mac partition 4: data.
You can partition using Hirens boot.

ok assume that you have install all others, like windows. i suggest that you install macdrive for windows. it is very helping for you changing dsdt, kexts. etc.

boot into installer usb, by press escape, and select usb drive for booting.
use cpus=1 -v -f PciRoot=1
finish it until finish. use generic or you can use /extra/extensions setting if myhack ask.

after install go to windows, put all kexts into /Extra/Extensions except audio kexts to /System/Library/Extension of the partition installed.
put dsdt, put smbios, put ssdt on partition installed.
move Geforce.kext and NV*.kext from /System/Library/Extensions into /Extra/Extensions/Removed

reboot

put usb back, to reboot, pick partition mac
and type
cpus=1 -v -f
finishing setup.

patching the AppleCPUintelManagement.kext....look post above...remove the NullCpuManagement.kext in /Extra/Extension
Add mountain SleepEnabler.kexts <maybe need maybe not>
run myfix on the partition mac for permission, and cache fix.

[King_Khan]

thanks i will try this after my exams. I have lion running in a virtual machine so ill try using that instead of an actual mac.

[sersel]

Thank you Babiloe and alianyn for your manuals, information and links! I've managed to install OS X 10.8 onto my U36SD-1A (i5-2410M, 8GB DDR3) within a few hours without a KP. I have now Windows 8 x64 and MacOS dual-boot with additional partitions of EFI (created by Windows) and Data on MBR hard drive.

The only problem I've met was Chameleon related. I tried to install it a few times using setup package (v2.1.2069). However, I was getting "boot0: test, boot0: error" messages trying to boot from Mac partition. I've managed to fix it with OSX installer's Terminal and Chameleon i386 binaries using this manual.

Almost everything is working now. Processor power management, graphics and displays, battery, input/output devices, audio, wireless and wired internet, card-reader.

However, some minor problems still exists:
- Webcam image is turned upside-down. In Windows it is fixed with ASUS-tuned driver. Is it required to install additional software like camtwist, or maybe a driver plist setting exists?
- USB 3.0 seems to operate under v2.0 speed using 3.0 devices. Root USB High-Speed bus driven by AppleUSBEHCI.kext is shown to support up to 480 Mb/sec speed. I'm using WD My Passport. I use DSDT from this post (is that okay?), and PXHCD.kext (not sure, whether this is required).
- Sleep generally works with "SleepEnabler Universal". However, sometimes mouse was too sleepy to get up on wakeup
- Display attach-detach actions are sometimes strange. For instance, not turning on laptop LCD when HDMI plugged of. Will test it a bit more. Maybe, that's another after-sleep syndrome
- Not tried Bluetooth. AzureWave's "Bluetooth USB Host Controller" exists in USB device tree. However, Bluetooth section of SystemInfo is empty, and no BT icons/controls. Haven't tried to turn it on from Windows and reboot yet.

Nevertheless, I'm pretty happy with the result!
I have tried Leo and Snow in the past, but with a lot more issues and less success.

[jujiyass]

Babiloe, on 08 December 2012 - 05:27 PM, said:

First.
you must have an installer. download myhack and 10.8 installer for 8 gb usb. To get 10.8 installer you have a need for a working mac/working hackintosh.
with 10.8 dmg installer is copied into 8gb usb using disk utility. my hack installer then should installed to usb partition! not your friend mac partition!
put alanyn dsdt into it! and the u36sd kexts including nullcpumanagement.kext, AtherosL1c.kext  to /Extra/Extensions in usb. also alanyn smbios.plist into /Extra/Extensions
ssdt.aml is cpu dependent, and different. if 2410 you can use alanyn others please seek.

i am using mbr. so the hdd was formated using mbr as myhack usually do.

each partition on should be primary. for me i have  partition 1 XP, primary, partition 2: Win7, partition3: Mac partition 4: data.
You can partition using Hirens boot.

ok assume that you have install all others, like windows. i suggest that you install macdrive for windows. it is very helping for you changing dsdt, kexts. etc.

boot into installer usb, by press escape, and select usb drive for booting.
use cpus=1 -v -f PciRoot=1
finish it until finish. use generic or you can use /extra/extensions setting if myhack ask.

after install go to windows, put all kexts into /Extra/Extensions except audio kexts to /System/Library/Extension of the partition installed.
put dsdt, put smbios, put ssdt on partition installed.
move Geforce.kext and NV*.kext from /System/Library/Extensions into /Extra/Extensions/Removed

reboot

put usb back, to reboot, pick partition mac
and type
cpus=1 -v -f
finishing setup.

patching the AppleCPUintelManagement.kext....look post above...remove the NullCpuManagement.kext in /Extra/Extension
Add mountain SleepEnabler.kexts <maybe need maybe not>
run myfix on the partition mac for permission, and cache fix.

Any chance you could wrap up all those kexts etc for us here?

regards
jujiyass