Hangten Posted July 25, 2011 Share Posted July 25, 2011 Update went fine for the most part. As usual replacing my AppleHDA.kext and all is normal. HD4850 needs only: LegacyATI4800Controller.kext, <key>GraphicsEnabler</key> <string>Yes</string> Chameleon RC5 752 Lion+Snow.pkg SL on separate drive boots fine Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1722029 Share on other sites More sharing options...
smartie77 Posted July 25, 2011 Share Posted July 25, 2011 i only have one kernel "mach_kernel " and i never edit the boot.plist i have one i build and i always use the samefunny i used all versions of lion with no problems (only had problem with ati kexts but was fixed with no problems) and now i update from GM to 10.7.2 and i get stuck in boot... i now removed now all my kexts (just leaved fakesmc.kext) , i even removed ati kexts and i still have the same problem... in the last line i get stuck doenst open the graphic interface maybe is something related to ati? you could test.. move all ATI*.kext from /S/L/E to another folder, then you will boot into a 1024x768 2d desktop. inside osx then use pacifist to extract the ati kexts from Appstore builds (System/Installation/packages ) , dig through them "essentialbasesystem.pkg" and the other packs. Extract the kexts and put them back into /S/L/E : using the 7.2.9 drivers instead of the 7.4.9 drivers from that beta combo update. If you boot with the old kexts again into QE/CI then yes the new ati drivers are to blame. Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1722141 Share on other sites More sharing options...
xpertvision Posted July 25, 2011 Share Posted July 25, 2011 you could test.. move all ATI*.kext from /S/L/E to another folder, then you will boot into a 1024x768 2d desktop. inside osx then use pacifist to extract the ati kexts from Appstore builds (System/Installation/packages ) , dig through them "essentialbasesystem.pkg" and the other packs. Extract the kexts and put them back into /S/L/E : using the 7.2.9 drivers instead of the 7.4.9 drivers from that beta combo update. If you boot with the old kexts again into QE/CI then yes the new ati drivers are to blame. only works if i delete all ati* kexts and remove the graphic enabler from chameleon using clean ati kexts from 10.7.0 .DMG + ati exotic 1.7.0 fix doenst work anymore on 10.7.2 update Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1722491 Share on other sites More sharing options...
sparkythewondersquid Posted July 25, 2011 Share Posted July 25, 2011 I installed this it seems fine don't really see a difference but I was curios Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1722739 Share on other sites More sharing options...
vboyz Posted July 26, 2011 Share Posted July 26, 2011 Can someone with a developer account that downloaded the DMG post eh SHA1 string for the download? open terminal and type: openssl sha1 /full/path/to/dmg Thanks Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1722894 Share on other sites More sharing options...
RN95 Posted July 26, 2011 Share Posted July 26, 2011 Well !, Update went smoothly om Dell M1530 with the exception of AppleHDA replacement. However, it is disappointing that they still haven't fixed FaceTIME. , which work on 10.6.8. AirDrop is another dark area. Cheers Can someone with a developer account that downloaded the DMG post eh SHA1 string for the download? open terminal and type: openssl sha1 /full/path/to/dmg Thanks for all its worth I have: 84c1a87c7a3cec3e1408f1a7eb6e49bbd2f7497e Cheers Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1723132 Share on other sites More sharing options...
HCE Posted July 26, 2011 Share Posted July 26, 2011 Well !, Update went smoothly om Dell M1530 with the exception of AppleHDA replacement. However, it is disappointing that they still haven't fixed FaceTIME. , which work on 10.6.8. Cheers FaceTime is fixed. The problem for hackintoshes is somewhere in the chameleon bootloader. Use chameleon build 755 and you will see that FaceTime will activate and operate normally. Then you can replace chameleon with newer versions, FaceTime will continue to work. But if you happen to deactivate it, you have to go back to build 755 to make it work again. See more details here: http://www.insanelymac.com/forum/index.php...61423&st=20 Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1723165 Share on other sites More sharing options...
RN95 Posted July 26, 2011 Share Posted July 26, 2011 FaceTime is fixed. The problem for hackintoshes is somewhere in the chameleon bootloader. Use chameleon build 755 and you will see that FaceTime will activate and operate normally. Then you can replace chameleon with newer versions, FaceTime will continue to work. But if you happen to deactivate it, you have to go back to build 755 to make it work again. See more details here: http://www.insanelymac.com/forum/index.php...61423&st=20 @HCE, Many thanks for that. I'll have a go . Cheers mate @HCE, Many thanks for that. I'll have a go . Cheers mate Yep! 755 worked (Dell M1530). The strange thing was that many real Mac users had the Problem after upgrading to LION. (?) Cheers Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1723264 Share on other sites More sharing options...
Hangten Posted July 26, 2011 Share Posted July 26, 2011 Anyword on Airdrop? anyone My logic is telling me it requires a dual band wifi with a compatible chip to apple hardware. This might allow two file shares to work in tandem = Airdrop. Tried modified smbios.plist and no effect. Even on clean install with new smbios.plist at first boot with all login network filled in.(apple ID) Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1723313 Share on other sites More sharing options...
vboyz Posted July 27, 2011 Share Posted July 27, 2011 Well !, Update went smoothly om Dell M1530 with the exception of AppleHDA replacement. However, it is disappointing that they still haven't fixed FaceTIME. , which work on 10.6.8. AirDrop is another dark area. Cheers for all its worth I have: 84c1a87c7a3cec3e1408f1a7eb6e49bbd2f7497e Cheers Thanks man, the download I got from Inet has same string...I trust you to download from Apple directly EDIT: Updated and now bonjour broken on my Realtek 8168D ethernet whereas it worked before the update. I can connect to Samba share drive but no longer the case . Gotta dig around. Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1723672 Share on other sites More sharing options...
rednous Posted July 27, 2011 Share Posted July 27, 2011 So far, so good with the 10.7.2 dev version Just had to patch AppleRTC and to use the older AppleHDA. Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1724134 Share on other sites More sharing options...
mitch_de Posted July 28, 2011 Author Share Posted July 28, 2011 AppleRTC patch? CAn you tell a bit more about that - THANKS I ask because since 10.7 i get sometimes (not every boot) an CMOS reset (BIOS values deleted) even with the normal dsdt RTC & CO fixes, which worked at 10.4/10.5/10.6. Perhaps you made some patches which does avaiod this also for me? Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1724483 Share on other sites More sharing options...
rednous Posted July 28, 2011 Share Posted July 28, 2011 AppleRTC patch? CAn you tell a bit more about that - THANKSI ask because since 10.7 i get sometimes (not every boot) an CMOS reset (BIOS values deleted) even with the normal dsdt RTC & CO fixes, which worked at 10.4/10.5/10.6. Perhaps you made some patches which does avaiod this also for me? mitch_de, sure and this is what I did when I installed 10.7 & the 10.7.2 dev version yesterday. I used this terminal command to patch the AppleRTC.kext (user rayap posted it here): sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|; s|\x75\x3d\x8b\x75\x08|\xeb\x3d\x8b\x75\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC Also Im attaching my current Lion DSDT for reference (only the HDEF section is different from my Snow Leopard's DSDT section, ALC888 onboard) --> DSDT.zip Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1724519 Share on other sites More sharing options...
efimac Posted July 29, 2011 Share Posted July 29, 2011 Thanks man, the download I got from Inet has same string...I trust you to download from Apple directly EDIT: Updated and now bonjour broken on my Realtek 8168D ethernet whereas it worked before the update. I can connect to Samba share drive but no longer the case . Gotta dig around. Same problem here. Can't connect to SMB share anymore as registered user Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1725387 Share on other sites More sharing options...
mitch_de Posted July 29, 2011 Author Share Posted July 29, 2011 THANKS to rednous for the AppleRTC.kext patch ! Now CMOS-BIOS won't be "formatted" at shutdown anymore. Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1725536 Share on other sites More sharing options...
rednous Posted August 1, 2011 Share Posted August 1, 2011 THANKS to rednous for the AppleRTC.kext patch !Now CMOS-BIOS won't be "formatted" at shutdown anymore. hehe, mitch, I was only a messenger Im glad I was of help to you and the rest with the CMOS reset problem Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1727491 Share on other sites More sharing options...
RN95 Posted August 2, 2011 Share Posted August 2, 2011 mitch_de, sure and this is what I did when I installed 10.7 & the 10.7.2 dev version yesterday.I used this terminal command to patch the AppleRTC.kext (user rayap posted it ..../AppleRTC.kext/Contents/MacOS/AppleRT[/code] Humm.. Not sure how this could have worked as you have missed the 'C' in ..../AppleRTC.kext/Contents/MacOS/AppleRT<-- Maybe you want to edit your post, Cheers Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1727850 Share on other sites More sharing options...
rednous Posted August 2, 2011 Share Posted August 2, 2011 Humm.. Not sure how this could have worked as you have missed the 'C' in ..../AppleRTC.kext/Contents/MacOS/AppleRT<-- Maybe you want to edit your post, Cheers Thanx for your notice. It was a typo & now it's corrected Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1727854 Share on other sites More sharing options...
mitch_de Posted August 2, 2011 Author Share Posted August 2, 2011 Yep, .C is missed but thats so clear that i seen it. Here with C at the end sudo perl -pi -e 's|\x75\x30\x44\x89\xf8|\xeb\x30\x44\x89\xf8|; s|\x75\x3d\x8b\x75\x08|\xeb\x3d\x8b\x75\x08|' /System/Library/Extensions/AppleRTC.kext/Contents/MacOS/AppleRTC (DOES patch the AppleRTC GM/511 to avoid CMOS problems (BIOS settings get overwritten with unpatched LION GM+511+10.7.2 dev RTC even you modded RTC in dsdt already (since 10.5 / 1.6 most people have that) Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1727856 Share on other sites More sharing options...
MasterDesaster Posted August 5, 2011 Share Posted August 5, 2011 Does sleepenabler.kext work for you? I'm using this 1.7 sleepenabler and it doesn't work. Has anybody a fixed version for 10.7.2? Or where can I get the correct pmVersion value? Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1730057 Share on other sites More sharing options...
RN95 Posted August 5, 2011 Share Posted August 5, 2011 Does sleepenabler.kext work for you? I'm using this 1.7 sleepenabler and it doesn't work. Has anybody a fixed version for 10.7.2? Or where can I get the correct pmVersion value? Hi, Use Terminal command: $ sudo pmset -a hibernatemode 0 and delete: /private/var/vm/sleepimage You're good as long as the battery is live. Hope this helps Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1730139 Share on other sites More sharing options...
MasterDesaster Posted August 8, 2011 Share Posted August 8, 2011 Use Terminal command: $ sudo pmset -a hibernatemode 0 and delete: /private/var/vm/sleepimage You're good as long as the battery is live. RAM sleep is great. But I have another problem: There is a kernel panic on startup. Console displays to use pmVersion=0 to "solve" the panic. But I don't want to disable sleepenabler. What is the correct version number for 10.7.2? In SL 10.6.7 I used pmVersion=23. Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1731480 Share on other sites More sharing options...
MasterDesaster Posted August 17, 2011 Share Posted August 17, 2011 What is the correct version number for 10.7.2? In SL 10.6.7 I used pmVersion=23. btw.. it is.. pmVersion=102 Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1736072 Share on other sites More sharing options...
Guest the tourist Posted August 17, 2011 Share Posted August 17, 2011 No probs, everything works, but the boot is really slow. Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1736231 Share on other sites More sharing options...
DrFate09 Posted August 17, 2011 Share Posted August 17, 2011 Does sleepenabler.kext work for you? I'm using this 1.7 sleepenabler and it doesn't work. Has anybody a fixed version for 10.7.2? I just found a working SleepEnabler for 10.7.1. No KP and it put my Mac to sleep manually. http://translate.googleusercontent.com/ ... DIEFQM9mvw DL: http://x86osx.com/bbs/c_data/pds_commen ... r.kext.zip Link to comment https://www.insanelymac.com/forum/topic/263338-new-lion-combo-update-out-dev-1072/page/2/#findComment-1736242 Share on other sites More sharing options...
Recommended Posts