KabutoTX Posted November 10, 2009 Share Posted November 10, 2009 Another GeForce KP here. Have 7900GS and tried NVenabler and EFI string. Both Kped. In 1024x768 right now working. Link to comment Share on other sites More sharing options...
laatmaarzien Posted November 10, 2009 Share Posted November 10, 2009 Seems like the 7xxx Series GEForce cards are the ones KP'ing. Wonder if we can restore a KEXT from 10.6.1... No idea where to start looking though. Link to comment Share on other sites More sharing options...
srg2k5 Posted November 10, 2009 Share Posted November 10, 2009 Why do I get a black screen on 10.6.2 boot ?This vanilla install worked fine on 10.6.1 ----- EDIT ----- I deleted the gfx strings from com.apple.boot.plist and I can now boot in VESA mode with 10.6.2 So I assume that my hex string is bad. I believe its something with the 8800GT. I have the exact same card. I was using an EFI string as well. Same exact error after updating from 10.6.1 to 10.6.2, black screen. Removed the EFI string works again. I tried creating a new string, same problem. As of this moment I have yet to find a fix but Im positive its something to do with the 8800GT 512mb EFI String. Link to comment Share on other sites More sharing options...
Bidule200 Posted November 10, 2009 Share Posted November 10, 2009 Good to know I'm not alone ! I'm now sure it's this HEX string. Did you try with another string like 8800GT 256MB ? Did you try an injector ? If you find a solution please tell me Link to comment Share on other sites More sharing options...
-aKy- Posted November 10, 2009 Share Posted November 10, 2009 Updated to 10.6.2 via Software Update. Everything working great so far, GA-EP35-DS3, GF8800GTX (via DSDT), sound still working (ALC889a). Had to delete SleepEnabler.kext from /E/E before updating, placed the udated version from Stellarola to /E/E after the update was finished. Everything is fine now. Link to comment Share on other sites More sharing options...
mwkchan Posted November 10, 2009 Share Posted November 10, 2009 GTS 250 Blank Screen too!!!! Link to comment Share on other sites More sharing options...
sbg Posted November 10, 2009 Share Posted November 10, 2009 Successful update. Only updated SleepEnabler to 10.6.2 version. GA-P35-DS3P,C2D E8500, nVidia 7600 GT, DSDT for GFX & Audio Link to comment Share on other sites More sharing options...
CrimsonAngel Posted November 10, 2009 Share Posted November 10, 2009 It says my volume dosent meet the requirements and im on 10.6.1 its not available to download for software update i had to get it from apples site. any ideas? Link to comment Share on other sites More sharing options...
mwkchan Posted November 10, 2009 Share Posted November 10, 2009 Seems only reported success are those with DSDT for GFX Link to comment Share on other sites More sharing options...
Bidule200 Posted November 10, 2009 Share Posted November 10, 2009 Seems only reported success are those with DSDT for GFX Since I don't understand anything about customizing the DSDT.aml, I've just compiled it with DSDT Patcher GUI, so that ethernet now works without kext and so that I don't get the CMOS reset on boot, but I don't know how to make the DSDT aware of my ALC889A and my 8800GT 512Mo I heard that it's possible but I don't understand anything by reading the tutorials. Any help for a DSDT noob ? Link to comment Share on other sites More sharing options...
breakingbad Posted November 10, 2009 Share Posted November 10, 2009 HI all. Can anyone here help a noob in Terminal commands? I updated my system without knowing that SleepEnabler would brick my system in 10.6.2 and now I can´t access my SL install. As I keep one Kalyway DVD here for emergency my only option for accessing my SL install is via Terminal in what I am a noob. I know almost nothing, so I ask... can anyone send me the line to type in Terminal to delete the SleepEnabler.kext ? Cheers. bb. Link to comment Share on other sites More sharing options...
TheGreatDeceiver Posted November 10, 2009 Share Posted November 10, 2009 made backup of kernel and extensions, updated and worked without a problem. no need to patch anything back. cool. now trying to figure out how to get gma950 64bit to work. just greeted with a black screen when I boot with 64bit. everything working 100% 32bit. Link to comment Share on other sites More sharing options...
Bidule200 Posted November 10, 2009 Share Posted November 10, 2009 can anyone send me the line to type in Terminal to delete the SleepEnabler.kext ? rm -R /Volumes/Macintosh\ HD/Extra/Extensions/SleepEnabler.kext (replace Macintosh\ HD by the name of the partition where /Extra is installed) Link to comment Share on other sites More sharing options...
Dancemaniac Posted November 10, 2009 Share Posted November 10, 2009 Install and working perfectly in hp pavilion dv 2025la, i don´t have kernel panics. Link to comment Share on other sites More sharing options...
KabutoTX Posted November 10, 2009 Share Posted November 10, 2009 I have my GeForce 7900GS back up with NVinject 0.2.2. Link to comment Share on other sites More sharing options...
GFOnyX Posted November 10, 2009 Share Posted November 10, 2009 Official: Atom not supported in 10.6.2. Link to comment Share on other sites More sharing options...
ariadri Posted November 10, 2009 Share Posted November 10, 2009 I have my GeForce 7900GS back up with NVinject 0.2.2. confirmed working thanks KabutoTX the only thing I've noticed is a stutter It was very smooth on 10.6.1 Link to comment Share on other sites More sharing options...
mafieud41 Posted November 10, 2009 Share Posted November 10, 2009 update succesfull with rebelefi.... no modify my kext !!! all is good... Link to comment Share on other sites More sharing options...
donkey Posted November 10, 2009 Share Posted November 10, 2009 10.6.2 update completed. Removed AppleHDA after update to prevent KP. Link to comment Share on other sites More sharing options...
386 Posted November 10, 2009 Share Posted November 10, 2009 core i5 on p55 works great on vanilla kernel in 32-bit and 64-bit, but a 64-bit realtek r1000 kext needs to be compiled/ported for x86_64 mode to be money on these current p55 boards. Link to comment Share on other sites More sharing options...
Goron Posted November 10, 2009 Share Posted November 10, 2009 core i5 on p55 works great on vanilla kernel in 32-bit and 64-bit, but a 64-bit realtek r1000 kext needs to be compiled/ported for x86_64 mode to be money on these current p55 boards. So, u say 10.6.2 brings vanilla flavour to i5 users? Would be quiet nice, as i plan to upgrade Which hardware do u use??? Link to comment Share on other sites More sharing options...
Dreamwatcher Posted November 10, 2009 Share Posted November 10, 2009 does anyone run ati radeon hd4670 ? i use 10.6.2 update and netkas's boot , display out black screean (dvi/hdmi/vga). Link to comment Share on other sites More sharing options...
shaanky98 Posted November 10, 2009 Share Posted November 10, 2009 Seems like the 7xxx Series GEForce cards are the ones KP'ing. Wonder if we can restore a KEXT from 10.6.1... No idea where to start looking though. I had the same I am using 7300gt but managed to get it to work after adding the following to extra folder. NVInject - An Nvidia graphic injector *x64 only Natit - Graphic injector KEXT with editable paramaters. You get get these from Stella's blog http://stellarola.tumblr.com/post/165429070/prepare-yourself Link to comment Share on other sites More sharing options...
kitmac Posted November 10, 2009 Share Posted November 10, 2009 also getting a BLACK screen on boot..... using 9800 GT with or without efi strings same result using DVI-HDMI TV reports loss of signal............. ol' Nvenabler didnt work......... switching dvi ports didnt work either anybody have any suggestions.......... ??? I know we went through this with 10.5.2 and the last major graphics update Link to comment Share on other sites More sharing options...
frtommy Posted November 10, 2009 Share Posted November 10, 2009 Hi to all. I update my Hackbook. Acer Extensa 5220 from 10.6.1 to 10.6.2 I download the update from Apple site. I don't update from software update. I update the system, and overwrite the NullCPU kext with the new from Netkas. I don't have sleppenabler. I reboot, and after, when I choose my partition with chameleon 2RC3 and Pcefi 10.5 , after 3 second, my notebook reboot. I can't acces to desktop. The only way to run SL is from my HD USB installation with 10.6.1. Can you help me? With the repeat reboot after i choose SL 10.6.2 in Chameleon. Thank you very very much to all. Sorry for my english errors. Bye bye. Link to comment Share on other sites More sharing options...
Recommended Posts