flukeskywalker Posted July 21, 2008 Share Posted July 21, 2008 hi i have a toshiba equium a100-337. installed iatos latest version, and i am still having problems with wired lan, toshiba informs me that i have a intel pro / 1000pl gigabit lan which "should" be 0x109a8086, but if i run the sys info checker thingy - me -bob it tells me that i have intel 10/100 ve ethernet adaptor which is 0x10928086. i also have a 3945 wireless card, which is not recognised for obvious reasons! Should my OS "see" either of these devices? currently my primary eth0 is my usb realtek card, then it shows eth1 as firewire. can any confirm if a have a hope in hell of getting my wired ethernet to work? i have tried many things like adding codes to plists etc, but i have never had a built - in ethernet device showing? should i get this at some point? thanks in advance all! Link to comment Share on other sites More sharing options...
Ivcha Posted July 22, 2008 Share Posted July 22, 2008 I did it but with some problems. Problems were caused because i installed driver for intel wireless 3945agb card.Because the system view the card as Ethernet adapter in network setup not as a wireless card.So i removed iwi3495agb.kext and reinstalled the AppleIntel8255x.kext.Now it works great and i am writting this post from mac. Link to comment Share on other sites More sharing options...
hagie92 Posted July 22, 2008 Share Posted July 22, 2008 Look at iSaints post, its by far the best and worked wonders for me. I re-wired the Ethernet cables in my house so I have wired networking in my office, for the specific purpose of using iATKOS's 10.5.4 version of Leopard. I have a HP pavilion dv1738 and everything works besides WIFI (intel 3945abg) and Microvision webcam for what its worth, Hagie92 Link to comment Share on other sites More sharing options...
kizwan Posted July 23, 2008 Share Posted July 23, 2008 Hi, I have installed Kalyway 10.5.2 on Intel motherboard (don't know exactly the model) that have Intel Pro/100 VE network card. I just follow instruction from post #2 in this thread. It is working but I need to boot with "-f" flag. My hardware ids is 0x10948086 (vendor id=8086, device id=1094). This information maybe useful for those who still unsuccessful to get their network card (Intel Pro/100 VE) recognized. kizwan Link to comment Share on other sites More sharing options...
upuri Posted July 25, 2008 Share Posted July 25, 2008 Hi Joshua, Go to My Computer... Then right click and choose Properties. Then select Hardware Tab... Device Manager Collpase the tree and display the Network Adapaters, you should have one listed as Intel ® PRO/100 VE Network Connection right click on this entry and select properties then go to the 'Details Tab' you should have it listed by Device Instance Id it will display the following or something similar: PCI\VEN_8086&DEV_1031&SUBSYS_004E0E11&REV_42\4&139E449D&0&40F0 To get the Intel ® PRO/100 VE Network Adapter, working in Mac OS X. You will need the AppleIntel8255x.kext. which is posted in this forum at post #10. I have it zipped along with installation instructions. The AppleIntel8255x.kext allows me to use my Intel Pro/100 VE Network Adapter, which is running the 82557 Chipset. If it doesn't work for you, usual disclaimers apply! Don't Blame me for trying! Let me know your progress. hi caladan, i am using Intel core duo lapatop with 2 gb memory, 100 gb hard disk, & intel pro 100 network etnernet card My instance path is this PCI\VEN_8086&DEV_1092&SUBSYS_30A5103C&REV_01\4&C586016&0&40F0 can u help me getting connected as i am novice user. & my mac is recognising eternet but says cable is unplugged Link to comment Share on other sites More sharing options...
badman Posted July 26, 2008 Share Posted July 26, 2008 PL2303_1.2.1r2.dmg.zip sorry guys i have not much experience i install this file ,my intel pro/100ve working rightway Link to comment Share on other sites More sharing options...
raven332 Posted July 26, 2008 Share Posted July 26, 2008 i tried to upload that file and couldn't for someone else, howd u do it? im on ubuntu. Link to comment Share on other sites More sharing options...
badman Posted July 26, 2008 Share Posted July 26, 2008 its for leopard Link to comment Share on other sites More sharing options...
mahesh_gar Posted July 29, 2008 Share Posted July 29, 2008 Any solution for intel 82566DC-2 Gigabit Network onboard Card. Link to comment Share on other sites More sharing options...
bkia7 Posted July 29, 2008 Share Posted July 29, 2008 downloaded AppleIntel8255x.kext.zip, placed it in System/Library/Extensions followed cloudy's guide CONFIRMED WORKING!!! thanks so much... Link to comment Share on other sites More sharing options...
zaeem Posted August 11, 2008 Share Posted August 11, 2008 hey guys, i have installed the ethernet and it says internal ethernet in the utility. How do i do the settings?? Link to comment Share on other sites More sharing options...
sakakaki Posted August 15, 2008 Share Posted August 15, 2008 Hello, guys my first post hope this would help some of you First of all my the ethernet on my board is vendor 8086 and device 27dc that some of you may have. I tried to installed the AppleIntel8255x.kext and all the ways posible posted by other users, nothing worked. So I decided to do it my way and guess what it worked. After searching most of the major Ethernet card brands found that my local Office max had a cheap card that work $19.99 + tax a D-link model DGE-530T only trouble found that had to re-installed Kalyway OSX Leopard 10.5.2 and had to installed AZALIA sound drivers found in this forum Curently my system is running Kalyway OSX LEO 10.5.2 (Need to have DVD in to boot) Windows XP PRO SP1 Windows Vista Ultimate OEM and every thing works great. my system is a HP Pavilion Media Center TV m7357c Desktop PC HardwareBase processor PentiumD 920 (P) DC 2.8 GHz 800 MHz front side bus Socket 775 Chipset Intel 945P Motherboard Manufacturer: Asus Motherboard Name: P5LP-LE HP/Compaq motherboard name: Lithium-UL8E Memory Component Attributes Memory Installed1.5 GB (3 x 512 MB)Maximum allowed4 GB* (4 x 1 GB) *Actual available memory may be lessSpeed supportedPC2-3200 MB/secType240 pin, DDR2 SDRAMDIMM slotsFourOpen DIMM slotsOneHard drive 300 GB SATA 7200 rpm 16X DVD(+/-)R/RW RAM (+/-)R DL LightScribe drive DVD ROM Maximum speed: 16XModem PCI K56flex data/fax modemVideo Graphics GeForce 6200SE 64 MB DDR memory I/O Ports: VGA, Composite, S-Video Television TV tuner card with FM tuner Sound/Audio Integrated High Definition audio Realtek ALC 882 chipset (had to use AZALIA drivers after new ethernet card) Supports up to 8 audio channels Dolby Pro Logic II compatible Dolby 5.1Network (LAN) Integrated 10/100 Base-T networking interface ( DEV 27DC )Memory card reader Supports the following cards: Compact Flash I Compact Flash II SmartMedia Memory Stick Memory Stick Pro MultiMediaCard Secure Digital (SD) Micro Drive XD Picture Card (xd = extreme digital) External I/O ports I/O ports on the front panelPort type Quantity 9-in-1 (4 slot)One1394OneUSBTwoHeadphoneOneMicrophoneOneAudio L-ROneS-video inOneComposite video inOneI/O ports on the back panelPort type Quantity PS2 (keyboard, mouse)Two (one each)ParallelOne USBFour 1394One LANOne Audio (side speaker out, rear speaker out, center speaker out, line-in, line-out, microphone)One eachExpansion slots (available) Slot type Quantity PCIThree (One available)PCI Express x16One (None available)DIMM SlotsFour (One available)Drive bays (available) Bay type Quantity 5.25" externalTwo (None available)3.5" internalOne (None available)Personal Media DriveOne (One available) Link to comment Share on other sites More sharing options...
Penguin786 Posted September 1, 2008 Share Posted September 1, 2008 Hi Everyone here is the AppleIntel8255x.kext you will need. I have it zipped along with installation instructions. The AppleIntel8255x.kext now allows me to use my Intel Pro/100 VE NIC which is running the 82557 Chipset. If it doesn't work for you usual disclaimers apply! Don't Blame me for trying! I do hope it helps. I have Intel chipset 945G/GZ and i am having problem Intel PRO/100 V make it work in Mac OS x86 10.5.4 on my gateway machine i fallowed all your intruction but when i ran the last command which is .. sudo kextload -v /System/Library/Extensions/AppleIntel8255x.kext I go error. here is cut and paste of error.. i also ran last command with -t this is also include here. zee-razis-gt5040:~ zee$ sudo kextload -v /System/Library/Extensions/AppleIntel8255x.kext can't add kernel extension /System/Library/Extensions/AppleIntel8255x.kext (not a bundle) (run kextload on this kext with -t for diagnostic output) So i ran last command with -t here is the out put ... zee-razis-gt5040:~ zee$ sudo kextload -v -t /System/Library/Extensions/AppleIntel8255x.kext kextload: kext /System/Library/Extensions/Apple02Audio.kext is not valid kextload: kext /System/Library/Extensions/AppleBlower.kext is not valid kextload: kext /System/Library/Extensions/AppleCore99NVRAM.kext is not valid kextload: kext /System/Library/Extensions/AppleCPUThermo.kext is not valid kextload: kext /System/Library/Extensions/AppleDallasDriver.kext is not valid kextload: kext /System/Library/Extensions/AppleFCU.kext is not valid kextload: kext /System/Library/Extensions/AppleFlashNVRAM.kext is not valid kextload: kext /System/Library/Extensions/AppleI2SModemFamily.kext is not valid kextload: kext /System/Library/Extensions/AppleK2SATA.kext is not valid kextload: kext /System/Library/Extensions/AppleK2SATARoot.kext is not valid kextload: kext /System/Library/Extensions/AppleKauaiATA.kext is not valid kextload: kext /System/Library/Extensions/AppleKiwiATA.kext is not valid kextload: kext /System/Library/Extensions/AppleKiwiRoot.kext is not valid kextload: kext /System/Library/Extensions/AppleLM87.kext is not valid kextload: kext /System/Library/Extensions/AppleMacRiscPCI.kext is not valid kextload: kext /System/Library/Extensions/AppleMPIC.kext is not valid kextload: kext /System/Library/Extensions/AppleOnboardAudio.kext is not valid kextload: kext /System/Library/Extensions/ApplePMU.kext is not valid kextload: kext /System/Library/Extensions/AppleSMU.kext is not valid kextload: kext /System/Library/Extensions/AppleSPU.kext is not valid kextload: kext /System/Library/Extensions/AppleVIA.kext is not valid kextload: kext /System/Library/Extensions/AppleVSP.kext is not valid kextload: kext /System/Library/Extensions/ATTOExpressPCIPlus.kext is not valid kextload: kext /System/Library/Extensions/AudioDeviceTreeUpdater.kext is not valid kextload: kext /System/Library/Extensions/CM4040.kext is not valid kextload: kext /System/Library/Extensions/CMD646Root.kext is not valid kextload: kext /System/Library/Extensions/CRYPTOCardPCCard.kext is not valid kextload: kext /System/Library/Extensions/IOADBFamily.kext is not valid kextload: kext /System/Library/Extensions/IOI2CControllerPMU.kext is not valid kextload: kext /System/Library/Extensions/IOI2CControllerPPC.kext is not valid kextload: kext /System/Library/Extensions/IOI2CControllerSMU.kext is not valid kextload: kext /System/Library/Extensions/IOI2CDeviceFCU.kext is not valid kextload: kext /System/Library/Extensions/IOI2CFamily.kext is not valid kextload: kext /System/Library/Extensions/KeyLargoATA.kext is not valid kextload: kext /System/Library/Extensions/LSIUltra320.kext is not valid kextload: kext /System/Library/Extensions/MegaRAID.kext is not valid kextload: kext /System/Library/Extensions/SCR24X_Apple_Driver.kext is not valid kextload: kext /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleGMACEthernet.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleRS574Serial.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleSCCSerial.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleVerizonSupport.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleVerizonSupportKicker.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/InternalUSBModem.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/MotorolaSM56K.kext is not valid can't add kernel extension /System/Library/Extensions/AppleIntel8255x.kext (not a bundle) (run kextload on this kext with -t for diagnostic output) kextload: resolving dependencies for kernel extensions with validation and authentication failures zee-razis-gt5040:~ zee$ Your early response will be helpful Thanks Zee ziarazi@sbcglobal.net Error.txt Link to comment Share on other sites More sharing options...
Penguin786 Posted September 2, 2008 Share Posted September 2, 2008 I have Intel chipset 945G/GZ and i am having problem Intel PRO/100 V make it work in Mac OS x86 10.5.4 on my gateway machine i fallowed all your intruction but when i ran the last command which is .. sudo kextload -v /System/Library/Extensions/AppleIntel8255x.kext I go error. here is cut and paste of error.. i also ran last command with -t this is also include here. zee-razis-gt5040:~ zee$ sudo kextload -v /System/Library/Extensions/AppleIntel8255x.kext can't add kernel extension /System/Library/Extensions/AppleIntel8255x.kext (not a bundle) (run kextload on this kext with -t for diagnostic output) So i ran last command with -t here is the out put ... zee-razis-gt5040:~ zee$ sudo kextload -v -t /System/Library/Extensions/AppleIntel8255x.kext kextload: kext /System/Library/Extensions/Apple02Audio.kext is not valid kextload: kext /System/Library/Extensions/AppleBlower.kext is not valid kextload: kext /System/Library/Extensions/AppleCore99NVRAM.kext is not valid kextload: kext /System/Library/Extensions/AppleCPUThermo.kext is not valid kextload: kext /System/Library/Extensions/AppleDallasDriver.kext is not valid kextload: kext /System/Library/Extensions/AppleFCU.kext is not valid kextload: kext /System/Library/Extensions/AppleFlashNVRAM.kext is not valid kextload: kext /System/Library/Extensions/AppleI2SModemFamily.kext is not valid kextload: kext /System/Library/Extensions/AppleK2SATA.kext is not valid kextload: kext /System/Library/Extensions/AppleK2SATARoot.kext is not valid kextload: kext /System/Library/Extensions/AppleKauaiATA.kext is not valid kextload: kext /System/Library/Extensions/AppleKiwiATA.kext is not valid kextload: kext /System/Library/Extensions/AppleKiwiRoot.kext is not valid kextload: kext /System/Library/Extensions/AppleLM87.kext is not valid kextload: kext /System/Library/Extensions/AppleMacRiscPCI.kext is not valid kextload: kext /System/Library/Extensions/AppleMPIC.kext is not valid kextload: kext /System/Library/Extensions/AppleOnboardAudio.kext is not valid kextload: kext /System/Library/Extensions/ApplePMU.kext is not valid kextload: kext /System/Library/Extensions/AppleSMU.kext is not valid kextload: kext /System/Library/Extensions/AppleSPU.kext is not valid kextload: kext /System/Library/Extensions/AppleVIA.kext is not valid kextload: kext /System/Library/Extensions/AppleVSP.kext is not valid kextload: kext /System/Library/Extensions/ATTOExpressPCIPlus.kext is not valid kextload: kext /System/Library/Extensions/AudioDeviceTreeUpdater.kext is not valid kextload: kext /System/Library/Extensions/CM4040.kext is not valid kextload: kext /System/Library/Extensions/CMD646Root.kext is not valid kextload: kext /System/Library/Extensions/CRYPTOCardPCCard.kext is not valid kextload: kext /System/Library/Extensions/IOADBFamily.kext is not valid kextload: kext /System/Library/Extensions/IOI2CControllerPMU.kext is not valid kextload: kext /System/Library/Extensions/IOI2CControllerPPC.kext is not valid kextload: kext /System/Library/Extensions/IOI2CControllerSMU.kext is not valid kextload: kext /System/Library/Extensions/IOI2CDeviceFCU.kext is not valid kextload: kext /System/Library/Extensions/IOI2CFamily.kext is not valid kextload: kext /System/Library/Extensions/KeyLargoATA.kext is not valid kextload: kext /System/Library/Extensions/LSIUltra320.kext is not valid kextload: kext /System/Library/Extensions/MegaRAID.kext is not valid kextload: kext /System/Library/Extensions/SCR24X_Apple_Driver.kext is not valid kextload: kext /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleGMACEthernet.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleRS574Serial.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleSCCSerial.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleVerizonSupport.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleVerizonSupportKicker.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/InternalUSBModem.kext is not valid kextload: kext /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/MotorolaSM56K.kext is not valid can't add kernel extension /System/Library/Extensions/AppleIntel8255x.kext (not a bundle) (run kextload on this kext with -t for diagnostic output) kextload: resolving dependencies for kernel extensions with validation and authentication failures zee-razis-gt5040:~ zee$ Your early response will be helpful. you can also see attach file.Hi Everyone here is the AppleIntel8255x.kext you will need. I have it zipped along with installation instructions. The AppleIntel8255x.kext now allows me to use my Intel Pro/100 VE NIC which is running the 82557 Chipset. If it doesn't work for you usual disclaimers apply! Don't Blame me for trying! I do hope it helps. Thanks Zee ziarazi@sbcglobal.net Error.txt Link to comment Share on other sites More sharing options...
Guero209 Posted September 2, 2008 Share Posted September 2, 2008 CrArC, I finally got my Leopard installation up and running... to where it was before I bricked it at least. I ended up having to manually install video drivers for my card, in order to get any sort of video on the machine. I went through the hellish process again of trying to set up my network card, and finally got it to work. Check this out: I downloaded the same network driver as I had before, and manually added my network device id to the aforementioned info.plist (IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8255x.kext/Contents/), rebuilt extensions cache and rebooted with -f ... no luck. What finally did it for me was removing (I guess it was older/defective/idk) the AppleIntel8255x.kext residing in /System/Library/Extensions. I didn't even have to reboot-- OS X alterted me that it had discovered a new network interface, added it to the list and gave me an address. Horray! Thanks for your help..turns out that minor detail was preventing any of it from working. OMG THANK YOU!!! I tried EVERYTHING in this thread and nothing worked... so after reading your post before i went to bed, i tried what you said; AND IT WORKED! ty ty ty ty! Link to comment Share on other sites More sharing options...
illsaide Posted September 5, 2008 Share Posted September 5, 2008 Hi Everyone here is the AppleIntel8255x.kext you will need. I have it zipped along with installation instructions. The AppleIntel8255x.kext now allows me to use my Intel Pro/100 VE NIC which is running the 82557 Chipset. If it doesn't work for you usual disclaimers apply! Don't Blame me for trying! I do hope it helps. i've try this, and no error report, all going normal but why my ethernet doesn't detected yet? plz help thx, sorry my bad english. Link to comment Share on other sites More sharing options...
ZeeJM Posted September 15, 2008 Share Posted September 15, 2008 I discovered two things when testing and using the Intel Pro/100 VE in my HP running JaS 10.5.4 1) I had to put the modified kext in the /System/Library/Extensions folder. If I simply modified the info.plist for the AppleIntel8255x.kext that lives deep down in the IONetworkingFamily.kext package I couldn't get the kext to load properly. 2) My machine has an NVidia graphics chipset. I ran into a conflict using titan and natit in conjunction with a loaaded AppleIntel8255x.kext that would cause instabilitiy. My solution was to use NVKush instead. Link to comment Share on other sites More sharing options...
Azimutz Posted September 26, 2008 Share Posted September 26, 2008 Well..i'm new in the house and this is my first post..let's see.. After reading all this thread and testing this on Kalyway 10.5.2 and iDeneb/JaS 10.5.4 i must say that you don't need to select the intel pro/100 ve driver at the time of installing the system.It's installing and activating by default..you only need to add the device id.If you select the driver at install,there will be another AppleIntel8255x.kext in the sistem and,that's why the patch does not work.Check the the /System/Library/Extensions for a AppleIntel8255x.kext and erase it.The one you need is in /System/Library/Extensions/IONetworkingFamily.kext. Some times when i reboot from windows or another partition,i have "cable unpluged",but untill today allways comes back after rebooting with -v or -v -f... :censored2: Case closed!..i think.. Thanks for all the help Link to comment Share on other sites More sharing options...
Benjan Posted September 30, 2008 Share Posted September 30, 2008 So did anybody got intel 82567lm work? Link to comment Share on other sites More sharing options...
air15 Posted September 30, 2008 Share Posted September 30, 2008 Hi¡ I just use the solutions of ASIO: For the ethernet, just edit /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8255x.kext/Contents/info.plist by adding 0x27dc8086 under IOPCIMatch. And /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel82845.kext (or something similar) must be removed to get AppleIntel8255x.kext loaded. Later delete Extensions.mkext from /System/Library. Run Disk Utility, repair & Re-boot. And ETHERNET Works!! THX in advanced. I Use Kallyway 10.5.2 on a MoBo Intel 945GTP Link to comment Share on other sites More sharing options...
D-Mist Posted October 2, 2008 Share Posted October 2, 2008 Thanks caladan for this awesome job. I just downloaded your kext for installation into my friend's toshiba laptop. I will get back to you about the result but I have a strong believe that it will work. Thanks again man. It is for because of people like u that we are still using OS X86. Thanks once again. Link to comment Share on other sites More sharing options...
Mamun Bangladesh Posted October 12, 2008 Share Posted October 12, 2008 Hi Everyone here is the AppleIntel8255x.kext you will need. I have it zipped along with installation instructions. The AppleIntel8255x.kext now allows me to use my Intel Pro/100 VE NIC which is running the 82557 Chipset. If it doesn't work for you usual disclaimers apply! Don't Blame me for trying! I do hope it helps. After 2 weeks in hell finaly my network card works, Thanks man, really thanks, u save my life. Link to comment Share on other sites More sharing options...
RaZer0r Posted November 4, 2008 Share Posted November 4, 2008 Whoohoow I got this card working using: My vendor and nic ID ( 1092 and 8086) I added those in the kext plist, and changed the first 0xffff0fff to 0xffffffff ^^ Now it says connected and such instead of saying "Cable Disconnected" All the time. (using osx86 10.5.4 (updating to 10.5.5 right now to check if that works too) ) EDIT: Well it seems i shouldn't have done the update to 10.5.5 as it gives me a kernel error on my HPET's Kernel panic all the way so I'll just keep it to the 10.5.4 version i'm running right now Link to comment Share on other sites More sharing options...
Chovija! Posted November 5, 2008 Share Posted November 5, 2008 Download this kext:http://forum.insanelymac.com/index.php?act...st&id=23631 Do this: 1. Extract the files. Open Terminal. 2. sudo -s 3. cd /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/ 4. mv AppleIntel8254XEthernet.kext 8254X.orig 5. rm -Rv AppleIntel8255x.kext 6. cd back to extracted files 7. chown -R root:wheel AppleIntel8255x.kext 8. chmod -R 755 AppleIntel8255x.kext 9. cp -R AppleIntel8255x.kext /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/ 10. open Network Panel in System Preferences. The NIC should be there. If not: 11. cd /System/Library/ 12. rm -Rv Extensions.mkext 13. diskutil repairPermissions / 14. reboot That should do it....NIC should be in the Network panel when the desktop returns. Many Thanks "time ed". This Worked Perfect for mi Desktop HP dx2300 , with iDeneb v 1.3. 10.5.5. Same LAN ICH7 - 27dc8086 Chovija.! Link to comment Share on other sites More sharing options...
suds Posted December 17, 2008 Share Posted December 17, 2008 I installed kext and it worked. Thanks man. Link to comment Share on other sites More sharing options...
Recommended Posts