rajindia Posted July 9, 2007 Share Posted July 9, 2007 Get From Here http://forum.insanelymac.com/index.php?act...st&id=13054 Link to comment Share on other sites More sharing options...
jaycard Posted August 28, 2007 Share Posted August 28, 2007 OK people.. see if you can figure this one out. lol I have 3 dvd's Jas 10.4.8, Uphuck 10.4.9 1.3 rev 1.3 (4gig dvd), and a Uphuck 10.4.9 rev 1.4 (which is only a littl over 1.4 gigs) My system is a Pentium D805 CPU, Motherboard: Intel D945GCCRL with Intel video GMA950 & LAN Intel 10/100 pro ve I installed using the first 2 dvd's and could not get the built in network working. I tried all the above solutions and nothing. Device id for my lan is 1094 8086 by the way.. Finally out of last hope I reinstalled the system using the rev 1.4 DVD which again is about 1.4 gigs and I used a Belkin ethernet card i had lying around. It picked up a "built in" ethernet but actually the one which worked was the installed belkin pci ethernet card. I even disababled the lan in the bios and the mac os still works with the Belkin card. I installed with only the intel 10/100 drivers selected.. nothing else. But in the end the Belkin worked. weird uh? But its all part of the fun of experimenting with a new os i guess One last question.. Is it normal for the OSX to install in under 12 minutes? I know theres heat and comments about the Pentium D805 being slow or outdated.. But this thing is fast. Link to comment Share on other sites More sharing options...
liger max Posted August 31, 2007 Share Posted August 31, 2007 wow caladan1810 I gotta say you're a godsend genius I don't know how you did it but I did everything with the vendor, card id, repair permission and everything I found from the forum but I couldn't get my ethernet to work. ...But then I found your zip file and I drag everything to the folder and copy all the scripts that you have in that zip file.... And now, I'm online typing all these lines Thank you and thank you so much caladan1810. here's my ethernet card 411: Intel Pro /100 VE from sony laptop PCG-V505EX Card ID is: 103D Card Vendor ID: 8086 and Caladan1810 zip file works great for me. Thanks Link to comment Share on other sites More sharing options...
ega Posted September 23, 2007 Share Posted September 23, 2007 Thanks Caladan1810. It worked for me. I only added my card in the Info.plist JAS 10.4.8 Toshiba Satellite A100/999: Intel /100 VE (card id: 1092 vendor id: 8086) Link to comment Share on other sites More sharing options...
Andy Depi Posted September 30, 2007 Share Posted September 30, 2007 Please help me! My instance id PCI\VEN_8086&DEV_1064&SUBSYS_80F81043&REV_03\4&23C0B1C&0&40F0 I followed your guide to add the 0x10648086, and the Built-in Ethernet appears in the System Preferences but it is disabled. Only the Serial Port is selectable. What should I do? Link to comment Share on other sites More sharing options...
SpudDogg Posted December 14, 2007 Share Posted December 14, 2007 Thanks cloudy!!! Lucky for me, my device ID is the same as yours. Thanks again for the help! Link to comment Share on other sites More sharing options...
radzar Posted January 23, 2008 Share Posted January 23, 2008 Hi Everyone here is the AppleIntel8255x.kext you will need. I have it zipped along with installation instructions. The AppleIntel8255x.kext now allows me to use my Intel Pro/100 VE NIC which is running the 82557 Chipset. If it doesn't work for you usual disclaimers apply! Don't Blame me for trying! I do hope it helps. Thanks Brother it worked THANKS A LOT Link to comment Share on other sites More sharing options...
franksxf Posted February 1, 2008 Share Posted February 1, 2008 Hi Everyone here is the AppleIntel8255x.kext you will need. I have it zipped along with installation instructions. The AppleIntel8255x.kext now allows me to use my Intel Pro/100 VE NIC which is running the 82557 Chipset. If it doesn't work for you usual disclaimers apply! Don't Blame me for trying! I do hope it helps. Thanks man! you are the god for me today! After almost 2 years after this post, I still saved by you! Link to comment Share on other sites More sharing options...
Bill Best Posted February 8, 2008 Share Posted February 8, 2008 I tried this on my Gateway mx8734 using Leopard 10.5.1 and it didn't work. Link to comment Share on other sites More sharing options...
macfan45 Posted February 18, 2008 Share Posted February 18, 2008 Get From Here http://forum.insanelymac.com/index.php?act...st&id=13054 You are a Genious. I am running 10.5.1 via Kalaway install dvd on a Gateway GT5012 and it worked perfectly. The first kext and other method did not work for me at all. This one worked perfectly fine! Link to comment Share on other sites More sharing options...
odie Posted February 19, 2008 Share Posted February 19, 2008 Just wanted to add, it works in 10.5.2 with 915GUX. I was looking for it for months Thanks for sharing. There is one drawback, is does not complete work under 10.5.2 Server, you cannot start the Server services. Link to comment Share on other sites More sharing options...
mintimperial Posted March 5, 2008 Share Posted March 5, 2008 Got this working on my Dell Dimension 5150C by editing the info.plist file and then running the terminal commands and repairing permissions, but after installing a couple of updates via the apple software update this seems to have stopped working. The additional text is still in the info.plist file, so i ran the terminal commands again, but to no avail. Can anyone give me info on how to reset it to the original so i can redo everything, or give me another fix. Anyone eklse have this happen? The Ethernet just shows up as not connected now. TIA Link to comment Share on other sites More sharing options...
time ed Posted March 7, 2008 Share Posted March 7, 2008 Got mine working on Asus P5LP-LE with Intel82562v (Ekron) onboard NIC. I added device ID 0x27dc8086 to <string> line below <key>IOPCIMatch</key> in Info.plist in /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/AppleIntel8255x.kext/Contents You will also have to move or rename AppleIntel8254XEthernet.kext in /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/ Delete Extensions.mkext, rebuilt cache, repair permissions, reboot. Link to comment Share on other sites More sharing options...
Painkiller Posted March 8, 2008 Share Posted March 8, 2008 Hello does anybody know, why my intel pro/100 VE onboard of my DELL 4600i doesnt get regonized from time to time? I have 10.5.2 running ( without QE..) and now and then it comes the line during boot up, that the content of this chip us unknown . Does someone experienced this too? I have to reboot until it gets it. Annoying... Link to comment Share on other sites More sharing options...
time ed Posted March 12, 2008 Share Posted March 12, 2008 Here is a list of device ID's + ICH that will work: INTEL_8255X_ETHERNET_DEVICE(0x1030, 0), INTEL_8255X_ETHERNET_DEVICE(0x1031, 3), INTEL_8255X_ETHERNET_DEVICE(0x1032, 3), INTEL_8255X_ETHERNET_DEVICE(0x1033, 3), INTEL_8255X_ETHERNET_DEVICE(0x1034, 3), INTEL_8255X_ETHERNET_DEVICE(0x1038, 3), INTEL_8255X_ETHERNET_DEVICE(0x1039, 4), INTEL_8255X_ETHERNET_DEVICE(0x103A, 4), INTEL_8255X_ETHERNET_DEVICE(0x103B, 4), INTEL_8255X_ETHERNET_DEVICE(0x103C, 4), INTEL_8255X_ETHERNET_DEVICE(0x103D, 4), INTEL_8255X_ETHERNET_DEVICE(0x103E, 4), INTEL_8255X_ETHERNET_DEVICE(0x1050, 5), INTEL_8255X_ETHERNET_DEVICE(0x1051, 5), INTEL_8255X_ETHERNET_DEVICE(0x1052, 5), INTEL_8255X_ETHERNET_DEVICE(0x1053, 5), INTEL_8255X_ETHERNET_DEVICE(0x1054, 5), INTEL_8255X_ETHERNET_DEVICE(0x1055, 5), INTEL_8255X_ETHERNET_DEVICE(0x1056, 5), INTEL_8255X_ETHERNET_DEVICE(0x1057, 5), INTEL_8255X_ETHERNET_DEVICE(0x1059, 0), INTEL_8255X_ETHERNET_DEVICE(0x1064, 6), INTEL_8255X_ETHERNET_DEVICE(0x1065, 6), INTEL_8255X_ETHERNET_DEVICE(0x1066, 6), INTEL_8255X_ETHERNET_DEVICE(0x1067, 6), INTEL_8255X_ETHERNET_DEVICE(0x1068, 6), INTEL_8255X_ETHERNET_DEVICE(0x1069, 6), INTEL_8255X_ETHERNET_DEVICE(0x106A, 6), INTEL_8255X_ETHERNET_DEVICE(0x106B, 6), INTEL_8255X_ETHERNET_DEVICE(0x1091, 7), INTEL_8255X_ETHERNET_DEVICE(0x1092, 7), INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), INTEL_8255X_ETHERNET_DEVICE(0x2459, 2), INTEL_8255X_ETHERNET_DEVICE(0x245D, 2), INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7), If you have ICH8 or later controller, you're probably out of luck for this fix. e.g.: 82566DC is supposed to have 82562v PHY, but the only controller mentioned in the architecture doc is 82577. After you add your devID to IOPCIMatch string in 8255x Info.plist, you will have to REMOVE or RENAME AppleIntel8254XEthernet.kext to avoid using -f boot flag or other problems. Remember permissions and cache. Link to comment Share on other sites More sharing options...
badseedjr Posted March 13, 2008 Share Posted March 13, 2008 Thanks for all the tutorials first of all... I have a new issue. I got the IONetworkingFamily and AppleIntel kexts loaded. Under system preferences/network, I see ethernet listed now. My problem is that it won't pull an address. It says that the "status of your network card can not be determined. Under system profiler, nothign shows up indicating that the card is detected. Any ideas? Link to comment Share on other sites More sharing options...
time ed Posted March 14, 2008 Share Posted March 14, 2008 What is device ID of your NIC? Look at System Profiler >Software >Extensions. Which networking kext's are loaded? Link to comment Share on other sites More sharing options...
badseedjr Posted March 14, 2008 Share Posted March 14, 2008 What is device ID of your NIC? Look at System Profiler >Software >Extensions. Which networking kext's are loaded? My device ID is 1092 The AppleIntel8255x.kext is loaded as is IONetworkingFamily. Nothing else that I can see as a networking kext. Link to comment Share on other sites More sharing options...
time ed Posted March 14, 2008 Share Posted March 14, 2008 My device ID is 1092The AppleIntel8255x.kext is loaded as is IONetworkingFamily. Nothing else that I can see as a networking kext. Did you remove or rename 8254XEthernet kext? In Sys Prefs >Network >Advanced, can you set any of the NIC properties manually? Any errors in system.log? What about after a restart? Link to comment Share on other sites More sharing options...
badseedjr Posted March 14, 2008 Share Posted March 14, 2008 Did you remove or rename 8254XEthernet kext?In Sys Prefs >Network >Advanced, can you set any of the NIC properties manually?Any errors in system.log? What about after a restart?I did remove the 8254 kext. I can change settings to the ethernet manually, but no matter what settings I set, they always revert back to what they were before. Where is system.log located? (new to OS X)I did remove the 8254 kext. I can change settings to the ethernet manually, but no matter what settings I set, they always revert back to what they were before. Where is system.log located? (new to OS X)It is working now. I changed the settings from auto to manual, then back to auto. I also added the DNS server address and it worked. Not sure which corrected it, but it is good now. Thanks all. Link to comment Share on other sites More sharing options...
MrZeroo00 Posted March 25, 2008 Share Posted March 25, 2008 I have a problem, here is what DPCIManager reports: So I have added 0x10928086 to line IOPCIMatch in Info.plist in /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/AppleIntel8255x.kext/Contents then I've moved AppleIntel8254XEthernet.kext, rebuilded Extensions's cache and repaired permissions, I've rebooted, but I can't get the LAN card working, here is what I get in system.log: 3/25/08 11:43:51 PM kernel Intel82557: Self test reports invalid ROM contents 3/25/08 11:43:51 PM kernel Intel82557: Self test reports internal register failure 3/25/08 11:43:51 PM kernel Intel82557: Self test reports serial subsystem failure 3/25/08 11:43:51 PM kernel Intel82557: Self test failed 3/25/08 11:43:51 PM kernel dsmos: Initializing... 3/25/08 11:43:51 PM kernel dsmos: Hook and decryption contexts set! 3/25/08 11:43:51 PM kernel dsmos: Starting... 3/25/08 11:43:51 PM kernel Intel82557: Self test reports invalid ROM contents 3/25/08 11:43:51 PM kernel Intel82557: Self test reports internal register failure 3/25/08 11:43:51 PM kernel Intel82557: Self test reports serial subsystem failure 3/25/08 11:43:51 PM kernel Intel82557: Self test failed 3/25/08 11:43:51 PM kernel Intel82557: Self test reports invalid ROM contents 3/25/08 11:43:51 PM kernel Intel82557: Self test reports internal register failure 3/25/08 11:43:51 PM kernel Intel82557: Self test reports serial subsystem failure 3/25/08 11:43:51 PM kernel Intel82557: Self test failed So please, help me! PS: Sorry for the English... I speak French. Edit: Resolved, I've downloaded this package, installed it, deleted AppleIntel8255x.kext in /System/Library/Extensions/IONetworkingFamily.kext, deleted the Extensions.mkext, repaired permissions, rebooted, and prayed, it's finally working. Thnak you . Link to comment Share on other sites More sharing options...
time ed Posted March 26, 2008 Share Posted March 26, 2008 That kext adds 0x27dc8086 to IOPCIMatch Link to comment Share on other sites More sharing options...
MrZeroo00 Posted March 26, 2008 Share Posted March 26, 2008 No, I've added 0x10928086 to IOPCIMatch in the kext, even if, it doesn't work. Link to comment Share on other sites More sharing options...
Denja Posted March 30, 2008 Share Posted March 30, 2008 Any solution for intel 82566DC-2 Gigabit Network onboard Card. Link to comment Share on other sites More sharing options...
goonygugle Posted April 3, 2008 Share Posted April 3, 2008 Got mine working on Asus P5LP-LE with Intel82562v (Ekron) onboard NIC. I added device ID (0x27dc8086) to line IOPCIMatch in Info.plist in /System/Library /IONetworkingFamily.kext/Contents/Plugins/AppleIntel8255x.kext/Contents You will also have to move or rename AppleIntel8254XEthernet.kext in /System/Library/Extensions/IONetworkingFamily.kext/Contents/Plugins/ Delete Extensions.mkext, rebuilt cache, repair permissions, reboot. i have the same mobo as you use in your build and installed iatkos everything works exept my lan,i tried this method but when i remove AppleIntel8254XEthernet.kext and reboot it gets stuck on the apple screen,i then have to boot in safe and put the file back in the folder,i also tried to rename it and had the same results,and suggestions? Link to comment Share on other sites More sharing options...
Recommended Posts