88 replies to this topic

[Chrysaor]

spanakorizo, on Nov 17 2008, 04:33 PM, said:

there is an intersting article here about sleep/hibernate modes in real macs
mine was in mode0 , i set it to mode3 but i see no difference
both works... should i notice something?

edit: i forgot the link  
http://www.macworld..../sleepmode.html

You wouldn't see any difference between 0 and 3 unless there is a power failure. 0 suspends to ram, 3 suspends to ram AND disk, if power fails it boots from sleepimage.

[spanakorizo]

11/17/08 3:18:32 PM kernel AppleIntelCPUPowerManagement: initialization complete
DSDT loaded
now some questions..
i blv that i have deepsleep (hibernate mac mode)
for example i tried this widget :http://deepsleep.free.fr/
and it sleeps normal (10 seconds the fans are on and then everything is quite)
when it wakes up should i see any progress bar ? (like system is restarting .. ..)
cause i see nothing, the hd loads and after 10-15 seconds i am able to continue osx as it was before

important:
at pcefi9 boot i can see :
Sleepimage has garbage
hibernate failed

garbage???  

so what do i do now?


and finally... wtf should i care about deepsleep in a desktop pc?

[stellarola]

Netkas,

Heads up. USB ports on front panel aren't waking up for some people like myself.

Anyone else experiencing this?

Thanks,

-Stell

[ontoid]

Yep me
As i see in profiler there are 2 kinds of USB ports
Some controlled by AppleUSBEHCI and others by AppleUSBUHCI
Only ports controlled by AppleUSBUHCI doesnt wake up.
Those ports are staying unpowered, mayby it could be fixed via dsdt patcher?

[quinielascom]

Quote

11/17/08 3:18:32 PM kernel AppleIntelCPUPowerManagement: initialization complete

It is important ? What is the principal function of this ?

I did the upgrade to PC EFI V9 (before have Chameleon 1.0.11 now says 1.0.12) after copy the original AppleIntelCPUPowerManagement.kext to /System/Library/Extensions ... reboot and this load fine, but i not see any difference.

[macita]

stellarola, on Nov 18 2008, 01:02 AM, said:

Netkas,

Heads up. USB ports on front panel aren't waking up for some people like myself.

Anyone else experiencing this?

Thanks,

-Stell

Hey Stella,

try to check BIOS setup i had the same in my asus then i enabled hand ehci (some like that...i dont rememb..) and it wrked!

[MacNutty]

I installed it too. Not viewing much difference.

[W.oo.dy]

Hey people, a little help here...
I've changed manually the boot file in usr|standalone|i386 with the EFI9 boot file, everything is working here, just like the old efi8 boot file... my method is right?
I can't remember how to install the pcefi, long time using the efi8 and i forget how to make it...

[stellarola]

macita, on Nov 18 2008, 04:14 AM, said:

Hey Stella,

try to check BIOS setup i had the same in my asus then i enabled hand ehci (some like that...i dont rememb..) and it wrked!

EHCI ports are fine, UHCI ports will not wake up. So my usb audio devices won't play nicely. I believe these are devices that run in USB 2.0 only.

-Stell

[pippo choi]

Please, where is the download link?

[ac3bcn]

Hi, this is my report.
If go to Deep Sleep (hibernate mode 3), then wake up normally , but when I shut down the system I get a Kernel Panic an AppleHDA audio.
Reboot works fine after go to hibernate, but shut down not.

I'm using DSDT.aml  override(WinXP Option) and Vanilla ACPIPlatform 1.2.1 and OpenHaltRestart.kext
If I use DSDT.aml (Darwin option) at wake up lost USB Keyboard.

[spanakorizo]

ac3bcn, on Nov 18 2008, 11:59 AM, said:

I'm using DSDT.aml  override(WinXP Option)

when it asks you which system to overide you must choose XP?
cause i choosed OSX, if i choose XP it will copy my settings from there? (that are correct)
or it will destroy the XP partition?
i just wonder why pcefi says hibernate error at boot

[ac3bcn]

spanakorizo, on Nov 18 2008, 02:08 PM, said:

when it asks you which system to overide you must choose XP?
cause i choosed OSX, if i choose XP it will copy my settings from there? (that are correct)
or it will destroy the XP partition?
i just wonder why pcefi says hibernate error at boot

Here`s the link with this recomendation

http://forum.insanel...o...683&st=211#

Post 212

Thats worked for, may not work for you.

[spanakorizo]

thanks i'll try now xp or vista emulation and i'll post back

edit: both xp&vista =same results
dsdt loading succesfully+intelcpupowermamagement
but efi9 complains at boot about hibernate failure ...
maybe someting in my bios?
i have everything off except "execute disable bit:enable"
plug&play system:enable
memory remap:disable
acpi/apic:enabled
s3 only
ahci disks

look, those are for the cpu, as i said all are disabled ,execpt execute disable bit:enabled (this is not mine setup pic..found in google)

[Bob Ajob]

macita, on Nov 18 2008, 03:14 AM, said:

Hey Stella,

try to check BIOS setup i had the same in my asus then i enabled hand ehci (some like that...i dont rememb..) and it wrked!

I think the BIOS item you are referencing is called 'EHCI Handoff' - not sure if your DFI Lanparty board has a similar option in BIOS?

Intel mention it in section 5.1 of the following link on page 121 -
Click here for link to Intel PDF

also this message seems relevant -
USB EHCI Handoff Boot delay issue

I vaguely remember that there may be better USB driver kexts out there or you can add your specific chipset device IDs to an info.plist or something?

[macita]

Bob Ajob, on Nov 18 2008, 05:11 PM, said:

I think the BIOS item you are referencing is called 'EHCI Handoff' - not sure if your DFI Lanparty board has a similar option in BIOS?

Intel mention it in section 5.1 of the following link on page 121 -
Click here for link to Intel PDF

also this message seems relevant -
USB EHCI Handoff Boot delay issue

I vaguely remember that there may be better USB driver kexts out there or you can add your specific chipset device IDs to an info.plist or something?

YES IT IS!!!!

in my ASUS P5W DH Deluxe BIOS 2704 can be switched ENABLED or DISABLED

i had same probs then stella, i went in to BIOS and i switch it ENABLE and TAH DAH!!! all is working....

[dakkie]

Guys i have some problem with signature..
 IMG_0092.JPG   51.03K   139 downloads

check attached screen with my problem. anybody know how to solve it. i'm running Acer Aspire laptop is it any different for all those features like DSDT and Deep Sleep stuff ??

PCEFIv9 loads successful but what about rest of included feature ? what should be done to make it works ??

please let me know

greetings

[macita]

for a moment..at boot press F8

then use this flag

-nowake

[Trauma!]

Hy all,

I've succed to boot Snow Leopard with this new version off EFI. Thanks for all Netkas.

But i'm having real troubles with AppleAHCIPort.kext. Evry time it loads i have a kernel panic. Any ideas??

I also got problems with my GFX, at the momment neither EfiString or NVKush are working!!

Thanks.

[ac3bcn]

Finally all is working fine.
I,ve installed boot(PCEFIv9) with Chameleon for HD installer(replacing the boot file)
I use DSDT.aml file, choosed 0Darwin while compiling with -newHPET option.
Set Hibernate mode to 3
$ sudo pmset -a hibernatemode 3
I'm using AppleACPIPlatform version 1.0.3 in my /Extra/Extensions

No more AppleHDAudio kernel panic in Shutdown after wakeup.
USB OK after wakeup.

Now I´ll try differents options, like AppleACPIplatform 1.2.1 and Hibernate mode 3.