=-Devin-= Posted February 12, 2008 Share Posted February 12, 2008 -- 10.5.2 Update Installation Guide -- For Intel Core 2 Duo and Intel Chipset Motherboards + EFI IT IS RECOMMENDED YOU BACKUP IMPORTANT DATA, OR, IF POSIBLE, THE ENTIRE SYSTEM. THIS WAY, IF INSTALL FAILS, ALL THE DATA IS RECOVERABLE. FIRST: backup /System/Library/Extensions/ 1) Download the update here: << Download >> 2) Open Terminal 3) Run the following commands: sudo -s Type your password. Hit enter. Then type this and hit enter: while sleep 1; do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done ^ ^ YOU MUST DO THIS STEP ABOVE!!! You CANNOT just delete it afterward. It WILL BREAK the install, and require a new install or restore from backup. 4) Run the installer. --------------------------------- 5) When the installer finishes, DO NOT REBOOT! 6) In the Terminal window, hold the CONTROL key and press C. 7) Type in the following command: sudo nano /System/InstallAtStartup/scripts/1 8) Find the line with /System/Library/Extensions/Dont Steal Mac OS X.kext 9) Replace it with: For DSMOS users: /System/Library/Extensions/dsmos.kext For R3D3 Users: /System/Library/Extensions/r3d3.kext 10) Hold CONTROL and press the O key. Then hit enter. 11) Hold CONTROL and press the X Key. 12) Type exit and enter. Repeat untill "Proccess Completed" is shown. 13) Close Terminal. -- Before you reboot, move any KEXTS from the backups you made, back to the Extensions folder. This may include AppleACPIPlatform,kext and others, graphics, sound, etc. -- 14) REBOOT and cross your fingers! ======================================= More help is available. Just post here for support! Credit to Netkas for this wonderful fix. This guide is based off Netkas's guide, in which I made a bit easier to understand for new users to the Hackintosh world. I TAKE NO RESPONSIBILITY FOR THE OUTCOME. PLEASE DO AT OWN RISK. Some people report it didn't work for them. It won't work for everybody. ======================================= Does it work? If So, PLEASE PLEASE PLEASE Help the Community know what works out with this update. Use the HCL! http://wiki.osx86project.org/wiki/index.php/HCL_10.5.2 Every contribution helps! Thank you everybody! Link to comment Share on other sites More sharing options...
BrumBrum74 Posted February 12, 2008 Share Posted February 12, 2008 How do I know which one to use between DSMOS and R3D3? I´m running Kalyway 10.5.1 version now with vanilla and efi mbr. Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 Most likely DSMOS. I think R3D3 is AMD.... Link to comment Share on other sites More sharing options...
Joeandmat Posted February 12, 2008 Share Posted February 12, 2008 mine it's dsmos... now i try... bye! Link to comment Share on other sites More sharing options...
GameGuy360 Posted February 12, 2008 Share Posted February 12, 2008 This better work....I KNOW WHERE YOU LIVE!!!! Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 This better work....I KNOW WHERE YOU LIVE!!!! I'm on the phone with you, {removed}. Its gonna work. Don't WORRY! Link to comment Share on other sites More sharing options...
CaptainNemo Posted February 12, 2008 Share Posted February 12, 2008 Yeah! Works! BUT - 1st time boot failes, the spinning wheel turns rounds and rounds and rounds. So I rebootet, pressed "any key" and started with "-s" into the Single User Mode. I run "fsck -fy" in that mode, typed "exit" afterwards and was able to boot into the OS again. It's a bit slow, but that's because of the Single User Mode. After another reboot my Hackintosh was happy with it's new OS X 10.5.2! Thanx so much, =-Devin-= Link to comment Share on other sites More sharing options...
Nykwil Posted February 12, 2008 Share Posted February 12, 2008 is there a way for me to run this with the leopard disk boot into the install menu? mount it via diskutil and run the terminal command in the background? Link to comment Share on other sites More sharing options...
New2OSx Posted February 12, 2008 Share Posted February 12, 2008 How do I know which one to use between DSMOS and R3D3? I´m running Kalyway 10.5.1 version now with vanilla and efi mbr. boot yr system with -v and check if there is a line with dsmos .... then you are using Dsmos. I thought when You install EFI you did copy dsmos, smbios, ... to yr system, or may be you just done by what ever guide told!!!! Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 is there a way for me to run this with the leopard disk boot into the install menu? mount it via diskutil and run the terminal command in the background? I don't understand the 1st question. Im sorry. Could you rephrase it? As for the second, yes. Mount it, and run terminal and the commands, but do then when your told. Most are before you start the install. Link to comment Share on other sites More sharing options...
CaptainNemo Posted February 12, 2008 Share Posted February 12, 2008 Well my way to check was pretty simple (not sure if this is a really good solution ) - Open up the terminal, type /Sys<TAB>/Lib<TAB>/Ext<TAB>/ds<TAB> If this shows /System/Library/Extensions/dsmos.kext you should use the dsmos.kext replacement Be warned! I'm not sure if there are system which have both files! (Kalyway 10.5.1 has dsmos.kext ONLY). Link to comment Share on other sites More sharing options...
adrian mak Posted February 12, 2008 Share Posted February 12, 2008 EFI_MBR a must on existing 10.5.1 installation ? mine is kalyaway dvd installation and hdd is formatted in MBR type Link to comment Share on other sites More sharing options...
Nykwil Posted February 12, 2008 Share Posted February 12, 2008 I don't understand the 1st question. Im sorry. Could you rephrase it?As for the second, yes. Mount it, and run terminal and the commands, but do then when your told. Most are before you start the install. i tried running netkas' instructions on his site but apparently i did something wrong and got a kernel panic. had to reboot. now all i get are kernel panics. should i just reinstall Leopard? Is there anyway i can recover? long story short i booted up into terminal via my leopard disk...thought maybe if i ran the brazilmac's postpatch.sh it would delete the AppleIntelCPUPowerManagement.kext i think im boned =( Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 EFI_MBR a must on existing 10.5.1 installation ?mine is kalyaway dvd installation and hdd is formatted in MBR type It should have EFI if you installed it. Link to comment Share on other sites More sharing options...
alexthevoice Posted February 12, 2008 Share Posted February 12, 2008 Success on a Notebook Toshiba Satellite A200-24H but my touchpad and my keyboard don't works! Solutions? Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 i tried running netkas' instructions on his site but apparently i did something wrong and got a kernel panic.had to reboot. now all i get are kernel panics.should i just reinstall Leopard? Is there anyway i can recover?long story short i booted up into terminal via my leopard disk...thought maybe if i ran the brazilmac's postpatch.sh it would delete the AppleIntelCPUPowerManagement.kexti think im boned =(Sounds like you might need a reinstall if you dont have a backup in TM. Sorry mate.Success on a Notebook Toshiba Satellite A200-24H but my touchpad and my keyboard don't works!Solutions?Sorry, not that I know. I use a desktop. Link to comment Share on other sites More sharing options...
MjP99 Posted February 12, 2008 Share Posted February 12, 2008 Success! Thank you. I had to reboot twice, but it worked after that. Under HARDWARE in ABOUT THIS MAC, it now says "error getting this information" All else appears to work ok... kalyway guid EFI M Link to comment Share on other sites More sharing options...
CaptainNemo Posted February 12, 2008 Share Posted February 12, 2008 Success!Thank you. I had to reboot twice, but it worked after that. Under HARDWARE in ABOUT THIS MAC, it now says "error getting this information" All else appears to work ok... kalyway guid EFI M Same here. I can't show my memory (4x 512MB DDR2-533MHz RAM). But everything else looks Ok. I can show informationa about a lot other details. Oh - and btw. when I launch the software-update now, I get this: I will NOT try that I'm sure it will roast my installation... Link to comment Share on other sites More sharing options...
daskog Posted February 12, 2008 Share Posted February 12, 2008 -- 10.5.2 Update Installation Guide --For Intel Core 2 Duo and Intel Chipset Motherboards + EFI 1) Download the update here: << Download >> 2) Open Terminal 3) Run the following commands: sudo -s Type your password. Hit enter. Then type: while sleep 1; do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done 4) Run the installer. --------------------------------- 5) When the installer finishes, DO NOT REBOOT! 6) In the Terminal window, hold the CONTROL key and press C. 7) Type in the following command: sudo nano /System/InstallAtStartup/scripts/1 8) Find the line with /System/Library/Extensions/Dont Steal Mac OS X.kext 9) Replace it with: For DSMOS users: /System/Library/Extensions/dsmos.kext For R3D3 Users: /System/Library/Extensions/r3d3.kext 10) Hold CONTROL and press the O key. Then hit enter. 11) Hold CONTROL and press the X Key. 12) Type exit and enter. Repeat untill "Proccess Completed" is shown. 13) Close Terminal. 14) REBOOT and cross your fingers! ======================================= More help is available. Just post here for support! Credit to Netkas for this wonderful fix. This guide is based off Netkas's guide, in which I made a bit easier to understand for new users to the Hackintosh world. I TAKE NO RESPONSIBILITY FOR THE OUTCOME. PLEASE DO AT OWN RISK. Some people report it didn't work for them. It won't work for everybody. things are still unclear! please fix ASAP! Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 The graphics update worked for me What's not to understand? Please, ask question if you do not understand. Link to comment Share on other sites More sharing options...
Colonel Posted February 12, 2008 Share Posted February 12, 2008 Hrmm.. any chance of getting this to work with a Celeron D 420 on the 915 chipset? Link to comment Share on other sites More sharing options...
ridgecity Posted February 12, 2008 Share Posted February 12, 2008 my machine locks up in the mac logo and ask to restart, is there any way I can undo this? Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 Hrmm.. any chance of getting this to work with a Celeron D 420 on the 915 chipset? I don't know. I just know how to install. I don't know what hardware can do it and what can't. Link to comment Share on other sites More sharing options...
ipod touch guy Posted February 12, 2008 Share Posted February 12, 2008 my machine locks up in the mac logo and ask to restart, is there any way I can undo this? u can try booting from the DVD and restoring from time Machine or reinstalling leopard. If u do this, you have to erase the drive first. otherwise it will continue to pop out kernel panics when u boot up Link to comment Share on other sites More sharing options...
=-Devin-= Posted February 12, 2008 Author Share Posted February 12, 2008 my machine locks up in the mac logo and ask to restart, is there any way I can undo this? With a Mac DVD and a Time Machine backup, yes. If you don't, not that I know of. Sorry. Link to comment Share on other sites More sharing options...
Recommended Posts