carlos228 Posted January 6, 2008 Share Posted January 6, 2008 Heit seems your problems come from the Nvidia kexts. some 7300 need to be flashed to work with them. Go to the Gotoh's Nvinject page : http://nvinject.free.fr , you will certainly obtaining help there. EDIt: look especialy here : http://nvinject.free.fr/forums/viewtopic.php?t=4 thanks! :-) I guess It needs to be flashed .. aargh .. Is there any recommendation for a card working perfectly with 10.5.1, especially dual screen? no matter if ATI or NVIDIA. should be passive cooled or very low noise. Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568813 Share on other sites More sharing options...
oldoldschool Posted January 6, 2008 Share Posted January 6, 2008 are you sure your dvd is ok ? let the verification to see if it is not defective. what choices in the installer do you make ? Thanks Dune31 for your prompt reply. I've burnt maybe 5 dvd's. Verified fine with nero and osx. Burnt at 1 speed!!! Initially i had got iatkos to work and then it sunddenly shut downa and the bios said something about overclocking failed??? Tried to reinstall but didn't happen. Downed Kalway and it worked. Then reinstalled to change to MBR and thats when the pain set in. I tried ti install again with guid and its a no go. Basically my settings are i choose both vanilla options..HDA 883 for sound and efi Mbr and thats it. No idea whats wrong cos i installed kalway twice out of 10 tries..bad averages but i'm persistent. I don't really want to use iatkos again cos it was a bit to slow and had issues..but kalway..when installed was wonderful. CHeers for your help and if you have any ideas i would appreciate your knowledge. Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568815 Share on other sites More sharing options...
miko88 Posted January 6, 2008 Share Posted January 6, 2008 After the installation of kalyway, Leopard boot only with the DVD inside. Any solution? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568828 Share on other sites More sharing options...
NoSignal Posted January 6, 2008 Share Posted January 6, 2008 Hello, I've succesfully installed Leopard. I have a PS/2 Keyboard and an USB Mouse and I can't seem to get the keyboard working, so I can't fill in my name and stuff. I just need to acces the Terminal to unload some kexts, so that my keyboard would work, but I'm not sure how to manage that. Any tips? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568837 Share on other sites More sharing options...
thyssen2k Posted January 6, 2008 Share Posted January 6, 2008 Hello, I've succesfully installed Leopard. I have a PS/2 Keyboard and an USB Mouse and I can't seem to get the keyboard working, so I can't fill in my name and stuff. I just need to acces the Terminal to unload some kexts, so that my keyboard would work, but I'm not sure how to manage that. Any tips? look: http://forum.insanelymac.com/index.php?sho...mp;#entry551699 Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568907 Share on other sites More sharing options...
bolly Posted January 6, 2008 Share Posted January 6, 2008 @DUNE im just wonderin if FInal cut pro 6 runs in P5W DH mobo without any problem/patching. i saw a thread that you need yukon.kext? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568926 Share on other sites More sharing options...
-DuNe- Posted January 6, 2008 Share Posted January 6, 2008 thanks! :-)I guess It needs to be flashed .. aargh ..Is there any recommendation for a card working perfectly with 10.5.1, especially dual screen? no matter if ATI or NVIDIA.should be passive cooled or very low noise.i recommand you a Powercolor X1950XT (this one is mounted with an Artic cooling) , it works nicely on dual screen and got very good benchmark with OSX.@DUNEim just wonderin if FInal cut pro 6 runs in P5W DH mobo without any problem/patching. i saw a thread that you need yukon.kext?i think it works ok since you run vanilla kernel. Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568927 Share on other sites More sharing options...
Bona Fide Posted January 6, 2008 Share Posted January 6, 2008 Is this a native Leopard install or do I have to have Leopard 10.5 installed before using this? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568945 Share on other sites More sharing options...
-DuNe- Posted January 6, 2008 Share Posted January 6, 2008 Is this a native Leopard install or do I have to have Leopard 10.5 installed before using this? Native Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568958 Share on other sites More sharing options...
bolly Posted January 6, 2008 Share Posted January 6, 2008 tnx for the fast reply DUNE...wat applications(all) you have in ur hackinstosh? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568970 Share on other sites More sharing options...
elektricki Posted January 7, 2008 Share Posted January 7, 2008 Okay, I too have a headache now lol. Read through at least 30 pages of this thread, no luck. I got the whole GUID thing down I think. Finally got to the part where you select the drive to install on. I highlight it. If I click "customize" or "continue." The window just disappears and leaves me in the installer with no window. I see the customize options for just a split second before it all disappears. The same goes for if I just hit continue. I'm wondering if I'm just pulling some nub move here. The log doesn't give me anything so I assume it's just hanging. Thank you guys. P4 prescott (sse3) intel 915 chipset (10.4.5 everything worked out of box. including core image / quartz) Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-568979 Share on other sites More sharing options...
russbeck83 Posted January 7, 2008 Share Posted January 7, 2008 Is there any solution for the sleep mode not working on an intel chipset i945P? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569003 Share on other sites More sharing options...
clouser Posted January 7, 2008 Share Posted January 7, 2008 ive read thru millions of comments, says it installed fine and i should restart...but it goes to an error page if i let it continue to boot from the hdd..and if i choose to boot from dvd it just goes back to the installer...now my computer keeps restarting, it asks if u wanna boot from dvd, and just keeps restarting, im not even pressing any buttions Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569004 Share on other sites More sharing options...
-DuNe- Posted January 7, 2008 Share Posted January 7, 2008 tnx for the fast reply DUNE...wat applications(all) you have in ur hackinstosh? logic audio 8, Digital Performer, Reason, Deckadance, Photoshop CS3, Office 2004, toast 8.03, Ilife08 and some others little stuffs. I am waiting for installaing Pro tools 7.4 cos is still not compatible with leopard. Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569010 Share on other sites More sharing options...
clouser Posted January 7, 2008 Share Posted January 7, 2008 ok im back at the installation, should i just erase my harddrive again, in extended journaled? then wat else after that...i know how u guys feel about answering the samequestions over and over cuz im on a diff forum and i help alot in the pc section and it gets frustrating wen people just go an ask stuff thats been answered 96876 times, but can u plz jus be chill with me =] Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569018 Share on other sites More sharing options...
-DuNe- Posted January 7, 2008 Share Posted January 7, 2008 ok im back at the installation, should i just erase my harddrive again, in extended journaled? then wat else after that...i know how u guys feel about answering the samequestions over and over cuz im on a diff forum and i help alot in the pc section and it gets frustrating wen people just go an ask stuff thats been answered 96876 times, but can u plz jus be chill with me =] please when you post problems, details your config , and what options you choose at install. Without that , i cannot help you Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569025 Share on other sites More sharing options...
afeagle Posted January 7, 2008 Share Posted January 7, 2008 So after a long time not being able to boot without DVD... I tried one last time, zeroed the drive, installed with SSE2 and MBR EFI selected, and it started without a hitch! Installed NvinjectGo for video support. Installed the Power Management bundle to get the battery icon. Thanks Dune! Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569033 Share on other sites More sharing options...
hagybear Posted January 7, 2008 Share Posted January 7, 2008 thankss!! Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569039 Share on other sites More sharing options...
clouser Posted January 7, 2008 Share Posted January 7, 2008 start over: chose the nvvidia desktop...both vanilla things...guid this time...the only wifi option....connexant realtek option....and thats it...its installing again...im just gonna do it till it works... =\ but my computer is an hp desktop...nvidia geforce 7900...intel core2duo or watever....{censored} i cant remember...cant go back to vista, it doesthe b0error thing, even if i set vista as active. =[ Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569058 Share on other sites More sharing options...
bolly Posted January 7, 2008 Share Posted January 7, 2008 @DUNE31 do you have guide or BIOS config of ASUS p5W DH for installing kalyway...tnx for the hel ..i appreciate.. Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569074 Share on other sites More sharing options...
Racer23 Posted January 7, 2008 Share Posted January 7, 2008 Ok, I have finally installed this. It worked when I got past the obvious. 1. Put in the DVD and booted 2. Partitioned using GUID 3. Chose 2 of the NVIDIA Options 4. Chose the Reatek Audio option 5. Chose the GUID EFI 6. DID NOT CHOOSE ANY OF THE VANILLAS 7. Installed 8 Restarted 9. F8 and then chose the Leopard Partition with the DVD in( Always kept trying to boot from the new OSX but constantly rebooted). So now I have some issues with it now. The major issue is that the internet is SOOO Slow. Tried to download Messenger a 9meg file and was moving at a rate of 3.2k/s DVD player does not work Graphics mode not changable (got a fix though) Cannot see other computers on the network So what is up with my internet speed? Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569107 Share on other sites More sharing options...
aphextom9 Posted January 7, 2008 Share Posted January 7, 2008 P5W DH - (all recomended BIOS options set) C2D E4600 4 GB RAM 160 GB SATA HD 20x DVD SATA ATI HD 2900 PRO Install options- (x)Vanilla_Kernel_ACPIPlatform ( ) SSE2 SYSTEM (x) NATIT_ATIcards (x) HDA_ALC882 ( ) Network drivers (x) BOOT_efi_guid Boots to grey screen with spinning thing, then turns dark grey and does nothing. why? is it my graphics card? help! Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569127 Share on other sites More sharing options...
Dark_Elf Posted January 7, 2008 Share Posted January 7, 2008 P5W DH - (all recomended BIOS options set)C2D E4600 4 GB RAM 160 GB SATA HD 20x DVD SATA ATI HD 2900 PRO Install options- (x)Vanilla_Kernel_ACPIPlatform ( ) SSE2 SYSTEM (x) NATIT_ATIcards (x) HDA_ALC882 ( ) Network drivers (x) BOOT_efi_guid Boots to grey screen with spinning thing, then turns dark grey and does nothing. why? is it my graphics card? help! I had the same problem with an HD2600 XT. The solution is: 1) Download Netkas' HD2900 driver 2) Open with Pacifist and extract the kexts from inside (you need a working OSX installation or maybe you can ask the kexts to someone ) 3) Copy kexts on a USB drive and boot the DVD with the drive connected 4) Open Terminal from the setup program and copy the kexts from the drive to your Extensions folder 5) Repair permissions and reboot Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569339 Share on other sites More sharing options...
oSxFr33k Posted January 7, 2008 Share Posted January 7, 2008 If I installed Kalyway's with EFI and GUID and basically chose no options will this be a vanilla install? If not what kext files are replaced from a vanilla install? Thanks!!If I installed Kalyway's with EFI and GUID and basically chose no options will this be a vanilla install? If not what kext files are replaced from a vanilla install? Thanks!! Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569364 Share on other sites More sharing options...
aokman Posted January 7, 2008 Share Posted January 7, 2008 Many thanks to the creators of this build, its simply amazing. I ran into a few little problems with the soundcard on my P5K deluxe but i did a reinstall with the correct driver this time and everything works i just cant get over it. In the end i just installed it and off i went, there is a issue with the JMACRON IDE/SATA controller and booting the DVD, but i just ran the DVD drive off my USB enclosure connector and hooked the destination HDD up to the ide channel instead. Once its all installed they can be swapped back again So far everythings running perfect, graphics acceleration is amazing compared to the last revisions and there was no stress installing. Link to comment https://www.insanelymac.com/forum/topic/77069-kalyway-1051-dvd-release-the-official/page/51/#findComment-569434 Share on other sites More sharing options...
Recommended Posts