JohnUK1 Posted January 28, 2008 Share Posted January 28, 2008 ive got 1 Leo DVD for AMD but takes Ages to install .. but i think its my USB HDD Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-597700 Share on other sites More sharing options...
prateesh Posted January 28, 2008 Share Posted January 28, 2008 DoiX, Any Chance of getting 10.5.1 AMD DVD for Leopard by zephyroth working on following specs Processor type : AMD Turion™ 64 X2 Mobile Technology TL-50 memory : 1 GB DDR2 memory HDD drives : 120 GB Sata (Last attempt to install jas 10.4.8 went in waste as its not recognized my sata drive) Optical drive type : Super Multi DVD Writer (+/-R +/-RW) with Double Layer support Network interface : Ethernet 10/100BT integrated network interface Wireless : broadcomm 802.11 a/b/g WLAN Video adapter : NVIDIA® GeForce™ Go 6150 (Is zephyroth release having a graphics driver for this ? If yes which option to select during installation) Please tell me whether it will recognize my inbuilt Notebook Keyboard during & after install (Jas release didn't recognized it) Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-597756 Share on other sites More sharing options...
DoiX Posted January 28, 2008 Share Posted January 28, 2008 DoiX, Any Chance of getting 10.5.1 AMD DVD for Leopard by zephyroth working on following specs Processor type : AMD Turion™ 64 X2 Mobile Technology TL-50 memory : 1 GB DDR2 memory HDD drives : 120 GB Sata (Last attempt to install jas 10.4.8 went in waste as its not recognized my sata drive) Optical drive type : Super Multi DVD Writer (+/-R +/-RW) with Double Layer support Network interface : Ethernet 10/100BT integrated network interface Wireless : broadcomm 802.11 a/b/g WLAN Video adapter : NVIDIA® GeForce™ Go 6150 (Is zephyroth release having a graphics driver for this ? If yes which option to select during installation) Please tell me whether it will recognize my inbuilt Notebook Keyboard during & after install (Jas release didn't recognized it) Well... i don't know tell me what chipset you have.... Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598017 Share on other sites More sharing options...
MegaMACOSX Posted January 28, 2008 Share Posted January 28, 2008 Well, I burned the Leopard 10.5 image for AMD at its lowest speeds (.iso), 2.4x, and upon restarting my computer, the disk returns with the following error, EBIOS read error: Device timeout Block 727708 (etc): Sectors 64 Is this a normal problem? I burned the disk via Sabayon Linux KDE Burning Tool. Any help would be appreciated. Thanks. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598079 Share on other sites More sharing options...
LeeAMDMAC Posted January 28, 2008 Share Posted January 28, 2008 Hello, is there any patches or anything i need to apply to get osx.4 or osx.5 to boot on a external hard drive. Ive given up on my laptop for now. for some reason it just will not boot it even though it is more or less an exact replica of my desktop which has taken to both no problems. Many Thanks Lee Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598137 Share on other sites More sharing options...
cgsheen Posted January 28, 2008 Share Posted January 28, 2008 Probably not. Installing to an external HD eliminates the IDE / SATA controller difficulties many seem to experience. That was why I initially couldn't install Zephyroth on my Compaq V2312us laptop. (turned out my laptop has other problems with Zephy 10.5.1, but at least I got it into the Desktop that way...) Do the install to the external drive on your DESKTOP. If you want you can go through the entire installation on that machine - THEN move the external to your laptop and boot it up using SAFE MODE. Or, you can run through the install, make sure the external is bootable, then plug it into the laptop for the initial boot and Initial Setup and Account Creation. (You can also use your Desktop OS X install to remove the nvidia related .kexts on the external drive before you boot it for the first time...) I'm about to transfer the 10.5.1 install on my 3rd Zephyroth machine from the external drive to an internal drive. 10.5.1 ia really working well on that machine and I could NOT install it initially on that machine without using the external drive... Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598158 Share on other sites More sharing options...
LeeAMDMAC Posted January 28, 2008 Share Posted January 28, 2008 ok, ive just gotten osx.5 to boot on my laptop, i just used acronis disk directro and copied over the partition from my desktop to usb hd and its booted problem is though, i cant use the built in mouse or keyboard any help? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598179 Share on other sites More sharing options...
cgsheen Posted January 28, 2008 Share Posted January 28, 2008 I had to plug a USB keyboard / mouse into my laptop initially. After you can get into OSX, you'll have to find the proper .kexts to get the keyboard working (and/or other hardware...). (I wasn't successful with my Compaq - although the ApplePS2Controller.kext should have worked...) With the Compaq: The broadcom wireless was supported out of the box, as was the 8139 wired LAN, it uses ATi x200 graphics - no hope for that. I didn't try to find a .kext for the synaptics touchpad but I think it may have eventually worked. I got my internal harddrive recognized (IDE), but not the optical drive... (for me it was too much work for too little joy, but my laptop isn't very "standard"...) Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598187 Share on other sites More sharing options...
LeeAMDMAC Posted January 28, 2008 Share Posted January 28, 2008 I had to plug a USB keyboard / mouse into my laptop initially. After you can get into OSX, you'll have to find the proper .kexts to get the keyboard working (and/or other hardware...). (I wasn't successful with my Compaq - although the ApplePS2Controller.kext should have worked...) With the Compaq: The broadcom wireless was supported out of the box, as was the 8139 wired LAN, it uses ATi x200 graphics - no hope for that. I didn't try to find a .kext for the synaptics touchpad but I think it may have eventually worked. I got my internal harddrive recognized (IDE), but not the optical drive... (for me it was too much work for too little joy, but my laptop isn't very "standard"...) Where can i get the patches? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598206 Share on other sites More sharing options...
cgsheen Posted January 28, 2008 Share Posted January 28, 2008 Once you know exactly what your hardware is, search these forums... Ask others how they got their xxx working. Maybe someone will have similar hardware, maybe not. 10.5.1 doesn't work on ALL PC hardware... (Macs, real Macs, have a limited hardware set. PC's not so much. 10.5.1 is built to run on Macs & the hardware they use - it's not built to run on PC's - we're just lucky that these guys have found some "workarounds" to get OS X running on certain PC hardware. I've tried 8 different PC's now. Works on 3 of the 8 I've tried...) Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598214 Share on other sites More sharing options...
LeeAMDMAC Posted January 28, 2008 Share Posted January 28, 2008 can u send me over the ps2 kext. also my wired ethernet broadcom i think i will get exact model l8r says cable disconnected even though its pluged in i cant get on net nd i dont know what to do. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598230 Share on other sites More sharing options...
prateesh Posted January 28, 2008 Share Posted January 28, 2008 Well... i don't know tell me what chipset you have.... DoiX, Here is the Dump data from CPUZ Chipset ------------------------------------------------------------------------------ Northbridge NVIDIA GeForce 6150 rev. A2 Southbridge NVIDIA nForce 410/430 MCP rev. A3 Memory Type DDR2 Memory Size 1024 MBytes Memory Frequency 321.5 MHz (CPU/5) CAS# 5.0 RAS# to CAS# 5 RAS# Precharge 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate 2T Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598306 Share on other sites More sharing options...
DoiX Posted January 28, 2008 Share Posted January 28, 2008 DoiX, Here is the Dump data from CPUZ Chipset ------------------------------------------------------------------------------ Northbridge NVIDIA GeForce 6150 rev. A2 Southbridge NVIDIA nForce 410/430 MCP rev. A3 Memory Type DDR2 Memory Size 1024 MBytes Memory Frequency 321.5 MHz (CPU/5) CAS# 5.0 RAS# to CAS# 5 RAS# Precharge 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate 2T it should work... if you hdd is not detected in the disk utility you have two solutions : 1. wait for rev2 2. add medevil kext to the dvd so it can recognise your hdd Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598312 Share on other sites More sharing options...
prateesh Posted January 28, 2008 Share Posted January 28, 2008 thats not an issue i have external Pata drive for it The real problems are Video adapter : NVIDIA® GeForce™ Go 6150 my inbuilt Notebook Keyboard during & after install will that will work ? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598318 Share on other sites More sharing options...
LeeAMDMAC Posted January 28, 2008 Share Posted January 28, 2008 Hello, i have a realtek HD Audio sound card in my acer aspire 9301awmsi laptop, can i get this to work, the 2 network adapters in it are broadcom and atheros AR5007EG, and it is the nforce mobile chipset ethernet port i think. Any way to get these working? many Thanks Lee Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598385 Share on other sites More sharing options...
noodpope Posted January 28, 2008 Share Posted January 28, 2008 I got it installed and the bootloader works perfectly , but i cant get the keyboard and mouse detected. It goes to the setup screen and my laptop keyboard and touchpad don't work at all. using a usb keyboard and mouse works, but once i get through detecting the keyboard type and all, right after transfering data from my old mac, if i click do not transfer now, it hangs up for a short time then goes right back to detecting the keyboard type. infinite loop. any ideas? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598445 Share on other sites More sharing options...
MegaMACOSX Posted January 28, 2008 Share Posted January 28, 2008 I burned the new AMD DVD for leopard at the lowest speed and was able to get the DVD to boot. However, after pressing any key, and seeing some of the files load, at times I get this error message: EBIOS Error (and so and so forth). Are there any suggestions that can be given to me in addressing this problem? I would greatly appreciate it. Thank you. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598454 Share on other sites More sharing options...
Raidz1 Posted January 28, 2008 Share Posted January 28, 2008 what chipset do you have? From CPU-Z Chipset ------------------------------------------------------------------------------ Northbridge ATI Xpress 200 (RS480) rev. 10 Southbridge ATI SB600 rev. 00 Memory Type DDR2 Memory Size 2048 MBytes Channels Dual Memory Frequency 249.4 MHz (CPU/8) CAS# 4.0 RAS# to CAS# 4 RAS# Precharge 4 Cycle Time (tRAS) 12 Bank Cycle Time (tRC) 17 Command Rate 1T Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598455 Share on other sites More sharing options...
MegaMACOSX Posted January 28, 2008 Share Posted January 28, 2008 ******Please Help I burned the new AMD DVD for leopard at the lowest speed and was able to get the DVD to boot. However, after pressing any key, and seeing some of the files load, at times I get this error message: EBIOS Error (and so and so forth). Are there any suggestions that can be given to me in addressing this problem? I would greatly appreciate it. Thank you. ******Any ways to resolve this? Used almost every DVD Burning software I know off Thanks Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598458 Share on other sites More sharing options...
mac_cute Posted January 28, 2008 Share Posted January 28, 2008 I got it installed and the bootloader works perfectly , but i cant get the keyboard and mouse detected. It goes to the setup screen and my laptop keyboard and touchpad don't work at all. using a usb keyboard and mouse works, but once i get through detecting the keyboard type and all, right after transfering data from my old mac, if i click do not transfer now, it hangs up for a short time then goes right back to detecting the keyboard type. infinite loop. any ideas? That sounds like a "known issue".Make a little research at the community Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598472 Share on other sites More sharing options...
MegaMACOSX Posted January 28, 2008 Share Posted January 28, 2008 ******Please Help I burned the new AMD DVD for leopard at the lowest speed and was able to get the DVD to boot. However, after pressing any key, and seeing some of the files load, at times I get this error message: EBIOS Error (and so and so forth). Are there any suggestions that can be given to me in addressing this problem? I would greatly appreciate it. Thank you. ******Any ways to resolve this? Used almost every DVD Burning software I know off Thanks Here are my Specs: Motherboard: Gigabyte Technology K8NXP-SLI, nForce 4 SLI Chipset MOBO Central-Processing-Unit: AMD 3500+ Venice Core Socket 939 Processor, SSE2 & 3 (not overclocked) Memory/Modules: 3GB PC3200 DDR-400 RAM, (2x1024MB Corsair 3200C2PT, 2x512MB Crucial Ballistix) Video/Graphics Card(s): 256MB NVIDIA GeForce 6600GT (Gigabyte Technology) (2x128MB in SLI Mode) Hard Drive (HD): Western Digital SATA 320GB Hardrive w/ 16MB cache Burners: 8x NU DVD Burner Other Disk Drives: 1.44MB Floppy Disk Drive Other Peripheals- Realtek AC'97 Integrated 16-bit Sound Card, 7-channel Marvell Integrated 10/100/1000 Ethernet NVIDIA Integrated 10/100 Ethernet (using right now) GA-WPKG Wireless 54mbps Wireless Card (Gigabyte Technology) IEEE 1394B (Latest) 4 USB Intergrated Ports 1.0/and/2.0 Thermaltake PSU, 550-watt (Peak) Power Supply Unit O/S's installed (will be removed later upon successful installation of MacOSX Leopard 10.5) Windows Vista Ultimate Operating System Sabayon Linux 3.4F Fedora Core 8 Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598481 Share on other sites More sharing options...
mac_cute Posted January 28, 2008 Share Posted January 28, 2008 My problem is i can install Leo AMD but after start booting i get kernel panic kernel TOH 9.1.0 and so on.Everything is ok but how to move forward from kernel panic. I run Tiger 10.4.9 v1.4a but that is not what i want. If anyone knows how to help me please i need it. Thanks in advance you truly Leopard fun. Sory about my English. My spec. are and tell me if someone of them are not good and make my leopard unusable: AMD X2 6000 Gigabyte GA M52l S3 2GB ram 160 GB WD ATA 500 GBSG Baracuda Sata 2 ( canot format or erase) Help me please or tell me which Leopard to use for my computer. Thanks and good luck to us all. Right...Kernel panic due to...?.What messages do you receive? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598508 Share on other sites More sharing options...
MegaMACOSX Posted January 28, 2008 Share Posted January 28, 2008 It says that MacOSX could not load... (etc) and automatically restarts. However, I tried pressing F8 this time and was finally able to access the GUI Installer. The only problem that now remains (after confirming that my media has passed the test) is that my mouse and keyboard are not recognized. This is a combo, Logitech LX700 Wireless Mouse and Keyboard. I would like to know if the installation supports this configuration. If not, should I try a wired mouse and keyboard? (From what I know from the top of my head is that the Logitech LX700 was only designed for PC's). Please let me know then, thanks a lot. Attached with this post is a picture I took of the first pop-up screen of selecting a language with the mouse cursor on the top left. Right...Kernel panic due to...?.What messages do you receive? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598582 Share on other sites More sharing options...
cgsheen Posted January 28, 2008 Share Posted January 28, 2008 You need a USB keyboard and mouse. PS2 keyboards don't work after the initial screen (not without "injecting a .kext"). Is your Logitech USB? Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598602 Share on other sites More sharing options...
MegaMACOSX Posted January 28, 2008 Share Posted January 28, 2008 I was able to reburn another DVD at 2x speed, and it finally worked. After I pressed any key, the DVD automatically did its configuration and as usual booted up and entered the initial screen where I select my language. I have a USB Keyboard, but not a USB mouse. Is a USB keyboard fine for now? Or would I need both? If so, how should make the appropriate changes? Can a PS/2 to USB adapter work for my mouse? Is there any other way besides paying the price. Thanks. Link to comment https://www.insanelymac.com/forum/topic/73524-new-amd-dvd-for-leopard/page/84/#findComment-598609 Share on other sites More sharing options...
Recommended Posts