New AMD DVD for leopard

[mac_cute]

yes, i had the panic at boot, and i remove the geforce and nvidia kexts, and then tested with that, and produces the error i described, and then i thought that could be due to the lack of video drivers and then installed NVinject kext but the problems remains the same...

 

Your video card may not be the problem:mine is 7300GS 512 Mb and it works fine...For what I see in your sig,did you edit your image and injected the SSE2 kernel right?.

[tebi]

yes, i did...and also have to replace the kernel once installed with macdrive

[insomnimac]

Few small problems are that my sound doesn't work and external USB drive isn't detected. Hardware is in my sig, any ideas? Can I use Azalia to enable sound?

 

Thanks zephyroth for this great DVD, I think it's the closest I'll get to a working Leopard install.

[tebi]

it hasn't been released yet and don't ask about where to download it, please !! those are the forum rules

 

Thanks

[cgsheen]

Few small problems are that my sound doesn't work and external USB drive isn't detected. Hardware is in my sig, any ideas? Can I use Azalia to enable sound?

 

Weird... My ALC850 was supported out-of-the-box by Zephyroth 10.5.1.

[mrburns05]

Weird... My ALC850 was supported out-of-the-box by Zephyroth 10.5.1.

 

Mine also worked but music played kinda crackly sounding so i downloaded "AppleHDAPatcher" (i think that was the name), and then a linux dump from an ALC880, ran the patch with the linux dump, and now sound is great!

 

Also got parallels to run , if you edit its ".plist" and remove the lines that tell it to check for "GenuineIntel" it will install...It works but my cpu doesnt support "Virtualization" so its pretty slow running parallels.

 

[yazyazoo]

Do you just burn this DVD and put it into the AMD computer and everything installs itself? Does this include Leopard or do you have to download that also?

 

Sorry for the newbie questions.

[laxattack]

just read and you shall find

[NATER]

almost everyone on here will help you, if you ask, i was a noobie too but this forum is great thank you to all of you who help out, we appreciate it

[insomnimac]

Mine also worked but music played kinda crackly sounding so i downloaded "AppleHDAPatcher" (i think that was the name), and then a linux dump from an ALC880, ran the patch with the linux dump, and now sound is great!

 

Also got parallels to run , if you edit its ".plist" and remove the lines that tell it to check for "GenuineIntel" it will install...It works but my cpu doesnt support "Virtualization" so its pretty slow running parallels.

 

 

 

I tried using HDAPatcher with the alc880 dump and still no go. My sound also doesn't work in JaS 1.4.8 but it worked fine under 10.4.6.

 

Anyone else having trouble with external usb drives?

[tomtom34]

Hi People!

 

I can't speak english, but I try to post my problem: The Leopard Installation boot, I can select my laguage, but: How I can create a HFS+ Partion with the MacOS partitioning Tool? My Disk is completely clean, there are no partitions on it. when I try to create a HFS+ partition, the PC works for a while and then it stops whit the message: operation timed out! What I've got to do now? I've tried to create a FAT32 partition with gParted from a bootable Disk, but the MacOS Partition Tool doesn't show me this partition! What I've got to do???

 

My configuration:

 

AMD 4800+

2GB RAM

nForce 4

8600 GT

 

Thanks!!!!

[richard.xsi]

Hi People!

 

I can't speak english, but I try to post my problem: The Leopard Installation boot, I can select my laguage, but: How I can create a HFS+ Partion with the MacOS partitioning Tool? My Disk is completely clean, there are no partitions on it. when I try to create a HFS+ partition, the PC works for a while and then it stops whit the message: operation timed out! What I've got to do now? I've tried to create a FAT32 partition with gParted from a bootable Disk, but the MacOS Partition Tool doesn't show me this partition! What I've got to do???

 

My configuration:

 

AMD 4800+

2GB RAM

nForce 4

8600 GT

 

Thanks!!!!

 

 

did you try to add the new Medevil kext to install DVD?

[chris]

I have gotten a hold of this disk image and have been trying to install it for a while now. I first tried with my SATA drive and that did not work, I was unable to mount the drive in "disk utility" and therefore could not format it. I then switched over to an older ATA drive and was able to mount and format that drive. I was able to install the OS but then not able to start up. I was following the guide over at http://osx86.thefreesuite.com/leo_amd.php and tried to follow step 12, but the console kept saying "no such user or file"... i then went on to try steps 14 and 15, neither of which worked. anyone know how to make this work?

 

for your info, i am running on a home made comp, specs are as follows:

CPU: AMD A64 X2 6000 3.0 AM2

Mem: 2 gigs GSKILL

MB: Gigabyte GA-M61P-S3

Dvd: Lite On

 

I am far from giving up, i just need some help as i have not gotten this working yet.

 

thanks for all the help in advanced

[mac_cute]

Do you just burn this DVD and put it into the AMD computer and everything installs itself? Does this include Leopard or do you have to download that also?

 

Sorry for the newbie questions.

 

This is the AMD DVD for Leopard forum (thanks to Zephyroth)...What do you think it is?. lol...

[richard.xsi]

you mean this one?

 

">> /usr/misc/script.sh Leopard (if you named the partition 'Leopard', if you gave it another name, replace 'Leopard' with your name)"

 

 

if so, i can confirm the Zep's DVD doesn't require this step.

 

 

i have similar setup like you ( x2 3600+ MCP61 board+SATA).

 

 

1.all i do before install is manually inject Medevil's latest SATA kext to the original DVD. (edit info plist with your own device id)

 

2.then burn with the modified ISO. install can process as normally even on a SATA HD.

 

3.after install, you need to recopy Medevil's kext (modified in Step 1) to IOATAFAMILY's plugin folder

 

(you need delete the original Nforce kext first).

 

step 3 can be finished either in single user (boot flag -s, after booting, mouse -uw / ) mode or DVD's terminal,

 

i recommend the former.

 

 

 

 

 

 

 

 

I have gotten a hold of this disk image and have been trying to install it for a while now. I first tried with my SATA drive and that did not work, I was unable to mount the drive in "disk utility" and therefore could not format it. I then switched over to an older ATA drive and was able to mount and format that drive. I was able to install the OS but then not able to start up. I was following the guide over at http://osx86.thefreesuite.com/leo_amd.php and tried to follow step 12, but the console kept saying "no such user or file"... i then went on to try steps 14 and 15, neither of which worked. anyone know how to make this work?

 

for your info, i am running on a home made comp, specs are as follows:

CPU: AMD A64 X2 6000 3.0 AM2

Mem: 2 gigs GSKILL

MB: Gigabyte GA-M61P-S3

Dvd: Lite On

 

I am far from giving up, i just need some help as i have not gotten this working yet.

 

thanks for all the help in advanced

[tomtom34]

did you try to add the new Medevil kext to install DVD?

 

 

TKS!

 

I think the MEDEVIL KEXT is already installed, because it shows me some messages in the text mode aubout medevil..... anyways, I try to format my disk to HFS+ with a windows tool, because now I don't need the Mac OS Drive Tool!

[chris]

you mean this one?

 

">> /usr/misc/script.sh Leopard (if you named the partition 'Leopard', if you gave it another name, replace 'Leopard' with your name)"

if so, i can confirm the Zep's DVD doesn't require this step.

i have similar setup like you ( x2 3600+ MCP61 board+SATA).

1.all i do before install is manually inject Medevil's latest SATA kext to the original DVD. (edit info plist with your own device id)

 

2.then burn with the modified ISO. install can process as normally even on a SATA HD.

 

3.after install, you need to recopy Medevil's kext (modified in Step 1) to IOATAFAMILY's plugin folder

 

(you need delete the original Nforce kext first).

 

step 3 can be finished either in single user (boot flag -s, after booting, mouse -uw / ) mode or DVD's terminal,

 

i recommend the former.

 

 

alright thanks, i will give this a shot.

[Fesob]

I have a problem when booting. It takes about 30 secs extra and I don't know why. These are the debug lines:

... kernel[0]: CODE SIGNING: cs_invalid_page: p=90[mdworker] clearing CS_VALID

... kextd[10]: IOKitWaitQuiet() timed out waiting to write kernel symbols

... kextd[10]: writing kernel link data to /var/run/mach.sym

 

I have a nearly the same problem.

Booting takes 1 minute but 30 seconds are for this IOKitWaitQuiet()

 

This is my screenshot:

 

Any idea?!

 

P.S.: When i install i delete Geforce.kext and NDAVRES.kext. Is there any problem having CI/QE enabled with Nvidia graphics card without those two kext? I'm about to get a Asus EN7300TC512/TD/128M (7300LE) for 30€.

[chris]

thanks for your help! I have gotten it up and running, though my lan and audoi do not work. I have found that my onboard lan is limiting and will be getting a Realtek 8139 which is supposed to work right away, i am also going to wait for Zephyroth Leopard 10.5.1 AMD v.2 as it should support my audio and the SATA from the burn. i hope it comes out soon.

 

 

Anyway, just wanted to thank you for the ideas.

[Lugmor]

My problem is i can install Leo AMD but after start booting i get kernel panic kernel TOH 9.1.0 and so on.

Everything is ok but how to move forward from kernel panic.

I run Tiger 10.4.9 v1.4a but that is not what i want.

If anyone knows how to help me please i need it.

Thanks in advance you truly Leopard fun.

Sory about my English.

My spec. are and tell me if someone of them are not good and make my leopard unusable:

AMD X2 6000

Gigabyte GA M52l S3

2GB ram

160 GB WD ATA

500 GBSG Baracuda Sata 2 ( canot format or erase)

Help me please or tell me which Leopard to use for my computer.

Thanks and good luck to us all.

[lilking]

I solved this already! I installed this: http://my.macdotnub.info/content/view/15/28/

 

NOw the sound and wifi..

 

 

Hi, i have a problem on booting leopard. It freezes to this:

Kernel Version:

Darwin Kernel Version 9.1.0: Fri Nov 16 14:50:43; made by ToH:xnu-1228.0.2~1/Build/obj/RELEASE_I386

 

 

I don't get this error if i boot in safe mode (-x).

 

I tried the remove the kext of GeForce and NV but no luck.

Everytime i boot up i can't get to boot without typing -x or entering safe mode.

 

Thanks in advance, appreciate it!

 

 

My Specs:

 

AMD X2 64 3600

MSI K9N Neo

Nvidia 76000 GT 256 MB

2 GB of RAM

 

[Raidz1]

Well i had tried to install this, but your version (zephyroth) is not recognizing my hard drive. I had tried everything (that i found), i tried using the disk part way, i tried reformatting to FAT32. No Luck. It just shows my DvD-ROM and the current install DVD released.

 

Any help would be greatly appreciated.

[DoiX]

Well i had tried to install this, but your version (zephyroth) is not recognizing my hard drive. I had tried everything (that i found), i tried using the disk part way, i tried reformatting to FAT32. No Luck. It just shows my DvD-ROM and the current install DVD released.

 

Any help would be greatly appreciated.

what chipset do you have?

[JohnUK1]

were can i download this from ?

[DoiX]

were can i download this from ?

 

lol...... search google or different p2p sites