nebula_cz Posted March 26, 2007 Share Posted March 26, 2007 good update in what i read, but i am new here where i can download the update ? ok i finded Link to comment Share on other sites More sharing options...
nirvanaguy19 Posted March 26, 2007 Share Posted March 26, 2007 what is the biggest difference you can see over 10.4.8 with the update (on a hackintosh with amd ofcourse) Link to comment Share on other sites More sharing options...
joe75 Posted March 26, 2007 Share Posted March 26, 2007 The biggest thing for me is speed. It seems to be a little snappier and 4.9 NV kexts add wanted features, like rotate and over scan. Don't forget, "it's new" and that much closer to a real mac! Link to comment Share on other sites More sharing options...
nirvanaguy19 Posted March 26, 2007 Share Posted March 26, 2007 cool, that is what i wanted to know. what is the recommended way to backup a working installation, my 10.4.8 works perfectly but i am tempted to try 10.4.9 if i just back up the extensions folder and mach_kernel is that enough. or do i need to back up some other stuff, which i can restore if i have some issues with 10.4.9 Link to comment Share on other sites More sharing options...
inter981 Posted March 26, 2007 Share Posted March 26, 2007 is 10.4.9 AMD TEST 1 (MacOSXUpd10.4.9Intel.pkg.zip 158MB), the last version for AMD processors ? or is there any final version ? Link to comment Share on other sites More sharing options...
Nicklas Posted March 27, 2007 Share Posted March 27, 2007 is 10.4.9 AMD TEST 1 (MacOSXUpd10.4.9Intel.pkg.zip 158MB), the last version for AMD processors ? or is there any final version ? The only one. Link to comment Share on other sites More sharing options...
inter981 Posted March 27, 2007 Share Posted March 27, 2007 I can't update from 10.4.8... i downloaded the file, updated in 10.4.8 with the patch, it asked for restart, and i did. after that, it doesn't boot. It stops on checking CPU 01 (I don't remember the exact phrase). I formateed all, and installed again 10.4.8 can u help me why? Link to comment Share on other sites More sharing options...
krowten Posted March 27, 2007 Share Posted March 27, 2007 I update to 10.4.9 with this problem - Now my CPU in "about this mac" is detected as unknown, but with 10.4.8 is detectec correctly. - Don't work QE and CI, but Callisto 06 and AGPGart work fine. I modified ATIRadeon9700GA.plugin for enable QE and CI,but have same result. - Another problem ... when I open the Dashboard, after is loaded, the sistem crash For my HW the 10.4.8 and 8.8.1 kernel was perfect! Can you help me! Link to comment Share on other sites More sharing options...
nebula_cz Posted March 27, 2007 Share Posted March 27, 2007 i have the same problem, i looking at apple and thaths all, if i try whith extension -s it stop bootin on somthing cheching or (black screen whith text) pls help... Link to comment Share on other sites More sharing options...
Nicklas Posted March 27, 2007 Share Posted March 27, 2007 I've installed both AMD X2 netkas kernel 8.9.1 and Tubgirl's 10.4.9 package. I dont see any improvment in the speedy...its exactly the same. Link to comment Share on other sites More sharing options...
aNILEator Posted March 27, 2007 Share Posted March 27, 2007 Well I decided to test 10.4.9 AMD TEST 1, so I formatted installed 10.4.8 AMD FINAL DVD from tubgirl then unzipped 10.4.9 and ran the installer (no modifications) but now the launch process gets stuck (looped really) on diskarb error says the diskarb isn't ready will try later, diskarb not ready etc etc etc this happens with normal booting -v -f, -v and -x also anyone know how to fix or proper/best way to install I have an AMD64 X2 4200+, Asus A8NE, ATI Radeon X1600 512MB PRO PCIe card Link to comment Share on other sites More sharing options...
rusty64bit Posted March 28, 2007 Share Posted March 28, 2007 I just posted my Hardware Config in the Hardware Forum, but a quick overview. Dual Opteron 250, 2 GBRam ASUS K8N-DL MoBo nvidia 7100GS The only thing that does not work, is my Broadcom Nic and If i click on "About this Mac" the Screen refeshes one time and nothing happens. I will keep 10.4.8 from JaS as long as he come up with a 10.4.9 Why Update if it works Link to comment Share on other sites More sharing options...
Nicklas Posted March 29, 2007 Share Posted March 29, 2007 Anyone having issues with iCal?? Its not working for me. Amd opteron. Link to comment Share on other sites More sharing options...
ffosilva Posted March 29, 2007 Share Posted March 29, 2007 I tried to install it on my machine (Tubegirl 10.4.8 - AMD64 754). I use SATA harddisks and when I updated, SATA drivers doesn't load and hangs on boot. Waiting for future releases. Tubegirl, release these drivers, please =~~ I need it to update mine version to 10.4.9... =/// Thanks. Link to comment Share on other sites More sharing options...
CyCLoBoT Posted March 29, 2007 Share Posted March 29, 2007 iCal doesn't work for me either...running AMD Athlon 64...the icon just keeps on bouncing in the dock but nothing happens. Link to comment Share on other sites More sharing options...
naquaada Posted March 30, 2007 Share Posted March 30, 2007 ffosilva: you have to replace VIAATA.kext with 10.4.7 version to get SATA support back. For nForce 4 (nForce 3?) ATA/SATA is a special driver which is maybe a bit safer than VIAATA.kext which was 'forgetting' some drives sometimes. Look here: http://forum.insanelymac.com/index.php?showtopic=35985 Post any errors and wishes for drivers to this thread and hope that one of the developers will pay attention to them. http://forum.insanelymac.com/index.php?showtopic=45557 GreetinX from the Other Side! Link to comment Share on other sites More sharing options...
PascalW Posted March 30, 2007 Share Posted March 30, 2007 I've made a little fix for iCal. You can download it here: http://www.mediafire.com/?eooh5y0haym You only need to run iCalPatcher. Link to comment Share on other sites More sharing options...
hecker Posted March 30, 2007 Share Posted March 30, 2007 Tubegirl, release these drivers, please =~~ I need it to update mine version to 10.4.9... =/// I'm sure your whining is exactly the kind of motivation tubgirl is looking for. hecker Link to comment Share on other sites More sharing options...
krowten Posted March 30, 2007 Share Posted March 30, 2007 Thanks PascalW!!! Now iCal work!! One problem solved!! Link to comment Share on other sites More sharing options...
jecy1122 Posted April 7, 2007 Share Posted April 7, 2007 I install JaS 10.4.8 AMD SS3 DVD in Asus M2NPV-MV. How can to install or patch 10.4.9 (MacOSXUpd10.4.9Intel.pkg.zip)? Thanks. Link to comment Share on other sites More sharing options...
krowten Posted April 7, 2007 Share Posted April 7, 2007 I have installed new kernel 8.9.1 SSE2 . I have a kernel panic with callisto driver, I have the same problem with Alkor.kext. The system boot in safe mode ( -x ) Anybody had test this kernel? Anybody had the same problem?? Link to comment Share on other sites More sharing options...
pandnaka Posted April 9, 2007 Share Posted April 9, 2007 hey guys!!! I have just update my Amd system to the 10.4.9 from tubegirl from a fresh installation of Jas 10.4.8, and now I have a eternity spining ring, anyway to get it load at all, or fixed to boot up? Link to comment Share on other sites More sharing options...
jecy1122 Posted April 10, 2007 Share Posted April 10, 2007 hey guys!!! I have just update my Amd system to the 10.4.9 from tubegirl from a fresh installation of Jas 10.4.8, and now I have a eternity spining ring, anyway to get it load at all, or fixed to boot up? Thanks You. Can you to post the procedure for me? I can't patch 10.4.9 for AMD system,please to give a hand. Thanks. Link to comment Share on other sites More sharing options...
pandnaka Posted April 10, 2007 Share Posted April 10, 2007 Thanks You.Can you to post the procedure for me? I can't patch 10.4.9 for AMD system,please to give a hand. Thanks. hey dude try this!!! http://forum.insanelymac.com/index.php?sho...c=45283&hl= I follow that instruction for my Intel system, and it work, And today I were having problem with my AMD system try to up date to 10.4.9, with out that instruction and it did not work, So I thought let just try to do the samething as I did with my Intel, So I did, but remember to use the update for the AMD one ok! if you are updating for your AMD! Don't use the one from the Apple web-site, I download the TubeGirl edition one for AMD!!! So now mine work, I have both the Intel and AMD up to date 10.4.9!!! Sweet huh! Got to love this Forum it rock Link to comment Share on other sites More sharing options...
audit13 Posted April 10, 2007 Share Posted April 10, 2007 I followed the Intel instructions for the AMD update as well. I still need to see if it will mount dmg files. I'm still debating whether to try and update the kernel to 8.9.1 from 8.8.1. Link to comment Share on other sites More sharing options...
Recommended Posts