xkazu Posted January 18, 2007 Share Posted January 18, 2007 Yes, "INCORE" is AP's network name.I not found "darwin_iwi2200: associated: 'INCORE' 00:17:9a:10:eb:d2" in log. After that log loop and about 5 minits kernel panic. uhm,ok. i re-read your log. sorry,i think that you cannot associate INCORE because INCORE is secure network. Link to comment Share on other sites More sharing options...
revertive Posted January 18, 2007 Share Posted January 18, 2007 (edited) thnx. good report. hum i has occured this problem. do you setupt network name via AirPort setting? I dont understand what driver should do when user set network name ... Yes i used Airport Settings to setup the card, the crash occurs when i click to connect to a network. Edit: I try to connect to my network with the security disabled. Still no luck. It crashes when i try to connect. dmesg.txt ioreg.txt Edited January 18, 2007 by revertive Link to comment Share on other sites More sharing options...
poplars Posted January 18, 2007 Share Posted January 18, 2007 has anyone under any circumstances been able to connect to an AP yet? Link to comment Share on other sites More sharing options...
kinwah.lai Posted January 18, 2007 Share Posted January 18, 2007 has anyone under any circumstances been able to connect to an AP yet? no, i still can not associate with my AP, even i disable my security in my belkin wireless router. the machine lock down everytime i try to associate with the AP. Link to comment Share on other sites More sharing options...
xkazu Posted January 18, 2007 Share Posted January 18, 2007 Yes i used Airport Settings to setup the card, the crash occurs when i click to connect to a network. Edit: I try to connect to my network with the security disabled. Still no luck. It crashes when i try to connect. if you set network name via AirPort Setting, driver always freeze. so you must not set network name ( currently support only automatic association ( cannot specify network name)). you go AirPort Setting -> click Option set "Automatically join an open network" (if "ask before joining an open network " or "keep looking for recent networks" , start to associate and kerne panic occurs.) and must not set network name. Link to comment Share on other sites More sharing options...
revertive Posted January 18, 2007 Share Posted January 18, 2007 (edited) if you set network name via AirPort Setting, driver always freeze. so you must not set network name ( currently support only automatic association ( cannot specify network name)). you go AirPort Setting -> click Option set "Automatically join an open network" (if "ask before joining an open network " or "keep looking for recent networks" , start to associate and kerne panic occurs.) and must not set network name. Ok ill try that, and post the new logs when im finisched. The driver isnt crashing when im not manually connecting to my AP. It finds the correct linksys AP, but i seems that it doesnt connect automaticly. Here my new logs, maybe you can find something usefull in there. dmesg.txt ioreg.txt Edited January 18, 2007 by revertive Link to comment Share on other sites More sharing options...
reeso300 Posted January 18, 2007 Share Posted January 18, 2007 Having installed the 3965 driver I managed to get as far as everyone else where by it shows that there is a 3rd party driver present. Anyway turned my laptop on today and it it stops!! get to the spinning logo then the blue screen comes ready to show my desktop but it never does it just stays on the blue screen, booted mac with -v and -s and the text states something about the wireless card. So my question is a)is it possible to delete a text with a command using -v to enter diagnostics. Or b)if not are the any other solutions people have?? Thanks in advance Link to comment Share on other sites More sharing options...
macstibs Posted January 18, 2007 Share Posted January 18, 2007 (edited) Having installed the 3965 driver I managed to get as far as everyone else where by it shows that there is a 3rd party driver present. Anyway turned my laptop on today and it it stops!! get to the spinning logo then the blue screen comes ready to show my desktop but it never does it just stays on the blue screen, booted mac with -v and -s and the text states something about the wireless card. So my question is a)is it possible to delete a text with a command using -v to enter diagnostics. Or b)if not are the any other solutions people have??Thanks in advance Using -s you should be able to boot into single-user mode and remove the kext. Holding down Shift during boot should do the trick. Edited January 18, 2007 by macstibs Link to comment Share on other sites More sharing options...
banane Posted January 18, 2007 Share Posted January 18, 2007 OS X 10.4.8/Darwin Kernel 8.4.1 on a Toshiba Portégé R100 with an Intel PRO/Wireless 2200BG card dmesg.txt ioreg.txt system.txt Link to comment Share on other sites More sharing options...
xkazu Posted January 18, 2007 Share Posted January 18, 2007 OS X 10.4.8/Darwin Kernel 8.4.1 on a Toshiba Portégé R100 with an Intel PRO/Wireless 2200BG card i found following entry your syslog. darwin_iwi2200: associated: 'Apple Network 816c86'darwin_iwi2200: authenticated: 'Apple Network 816c86' 00:0d:93:81:6c:86 it work. Link to comment Share on other sites More sharing options...
xkazu Posted January 18, 2007 Share Posted January 18, 2007 hi,all. my version print much so log message overflow in dmesg and all messages dont output. sorry , if post log message, plz post /var/log/system.log or "grep iwi2200_darwin /var/log/system.log". and if user found "darwin_iwi2200: associated: '<your network name>' ", association is successed. Link to comment Share on other sites More sharing options...
kinwah.lai Posted January 19, 2007 Share Posted January 19, 2007 hi xkazu, i manage to associate with my AP now. but DHCP is not working Jan 19 08:33:03 DarrenLai configd[59]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Jan 19 08:33:03 DarrenLai configd[59]: DHCP en1: INIT transmit failed Jan 19 08:33:11 DarrenLai configd[59]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Jan 19 08:33:11 DarrenLai configd[59]: DHCP en1: INIT transmit failed Jan 19 08:33:19 DarrenLai configd[59]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50) Jan 19 08:33:19 DarrenLai configd[59]: DHCP en1: INIT transmit failed Link to comment Share on other sites More sharing options...
kinwah.lai Posted January 19, 2007 Share Posted January 19, 2007 here is part of my log.. n 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) received BEACON (128) Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_SCAN) Beacon Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_SCAN) Time Stamp 1[4709F184]Time Stamp 2[00000000]Beacon Interval[0064]Capabilities [0000-0100] Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) MFIE_TYPE_SSID: 'KinWah_WiFi' len=11. Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) MFIE_TYPE_DS_SET: 1 Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) MFIE_TYPE_TIM: partially ignored Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) MFIE_TYPE_ERP_SET: 0 Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) Unsupported info element: 47 Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) MFIE_TYPE_GENERIC: 6 bytes Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_MGMT) not implemented Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_SCAN) Adding 'KinWah_WiFi' (00:11:50:c9:04:64) via BEACON. Jan 19 08:37:07 DarrenLai kernel[0]: darwin_iwi2200: (80211_SCAN) exit Link to comment Share on other sites More sharing options...
xkazu Posted January 19, 2007 Share Posted January 19, 2007 here is part of my log.. this version dont be implemented rx , tx data packet yet. cannot send packet upper data link layer...( dont dhcp , TCP,UDP...). Link to comment Share on other sites More sharing options...
Thomas202 Posted January 19, 2007 Share Posted January 19, 2007 I admire your work! this is in the real OSX86 spirite!!! Keep on going!!! Link to comment Share on other sites More sharing options...
patatester Posted January 19, 2007 Share Posted January 19, 2007 Could the fact that it cannot find the mac address be related to an incorrect device id ? I will take a look for myself when i get home later on tonight. Link to comment Share on other sites More sharing options...
huked on foniks Posted January 19, 2007 Share Posted January 19, 2007 I havent installed OSX86 yet but i might and also have a Intel® PRO/wireless 2200BG network connection and was wondering if the ethernet adapter will work. Its a realtek RTL8139/810x Family Fast Ethernet NIC. help would be appreciated. Link to comment Share on other sites More sharing options...
kinwah.lai Posted January 19, 2007 Share Posted January 19, 2007 I havent installed OSX86 yet but i might and also have a Intel® PRO/wireless 2200BG network connection and was wondering if the ethernet adapter will work. Its a realtek RTL8139/810x Family Fast Ethernet NIC. help would be appreciated. huked on foniks , u can use the search in this forum or browse the Hardware subforum. i believe realtek is working for OSx86 Link to comment Share on other sites More sharing options...
eLMafUDd Posted January 19, 2007 Share Posted January 19, 2007 I still cannot get any furthur than the boot screen with the kext installed. I just get a kernel panic upon trying to boot. Any suggestions? Link to comment Share on other sites More sharing options...
jalavoui Posted January 19, 2007 Author Share Posted January 19, 2007 this is v5 of iwi2200.kext please post logs thanks iwi2200_source.zip iwi2200_v5.kext.zip Link to comment Share on other sites More sharing options...
plonka2000 Posted January 19, 2007 Share Posted January 19, 2007 this is v5 of iwi2200.kext please post logs thanks Hi and thanks for your help. THe problem I'm having is I'm using a Fujitsu Siemens Lifebook S7020 and as my wireless I have this 2200BG net card. I'm really trying to get this working but I'm having some real problems finding a suitable driver for my '02 Micro' cardbus controller. Can anyone help point me in the right direction to get this working? I already downloaded a IOPCCardFamily.kext file in another post, but I get a kernel Panic everytime the iwi2200.kext uses it as a dependency. Can anyone point me to a suitable thread or post for this as I'm having trouble? I'm kinda stuck with my onboard LAN as well as its a Broadcom 5751 Gigabit, which is also really troublesome. So far I've managed to get that *almost* running but my MAC address is stuck as 00:00:00:00:00:00. A common issue that many laptops except mine seem to be able to get around. I will try your v5 with my current setup though. Thanks. Link to comment Share on other sites More sharing options...
Telefunken Posted January 19, 2007 Share Posted January 19, 2007 Willing to try your next kext. What logs do you need? Link to comment Share on other sites More sharing options...
plonka2000 Posted January 19, 2007 Share Posted January 19, 2007 Further to my last post, I've tried your v5 kext and it now recognises my card as Airport. Thanks, as this is great progress for me. However, I cant detect any WiFi networks around and if I try to connect to mine using the 'Other...' command, my system locks. However, this is progress. Here is my log: ks-computer:~ root# dmesg hi mem tramps at 0xffe00000 PAE enabled enabling INTEL features standard timeslicing quantum is 10000 us vm_page_bootstrap: 512192 free pages mig_table_max_displ = 71 Enabling XMM register save/restore and SSE/SSE2 opcodes ACPI CA 20051117 [debug level=0 layer=0] AppleIntelCPUPowerManagement: ready AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled PASSED! ...maximum protection of commpage set ALL Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. using 10485 buffer headers and 4096 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 0:23 ACPI: System State [s0 S3 S4 S5] (S3) Security auditing service present BSM auditing present disabled From path: "uuid", Waiting for boot volume with UUID 5201987C-3BC4-32D4-AA84-02C73B601FF0 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> USB caused wake event (EHCI) IOPCCardBridge::start failed AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled Debug driver registered: AppleUSBUHCI Debug driver registered: AppleUSBUHCI FireWire (OHCI) TI ID 8026 PCI now active, GUID 00000e1003VVXXYY; max speed s400. IOBluetoothHCIController::start Idle Timer Stopped IOBluetoothHCIController::configurePM Start Idle Timer Registering For 802.11 Events [HCIController][setupHardware] AFH Is Supported Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST96812AS Media/IOFDiskPartitionScheme/Untitled 2@2 BSD root: disk0s2, major 14, minor 2 Jettisoning kernel linker. Resetting IOCatalogue. GFX0: family specific matching fails display: family specific matching fails Matching service count = 0 Matching service count = 2 Matching service count = 2 Matching service count = 2 Matching service count = 2 Matching service count = 3 GFX0: family specific matching fails display: family specific matching fails GFX0: family specific matching fails display: family specific matching fails iwi2200: disable 1 led 1 mode 0 iwi2200: darwin_iwi2200 iomemory length: 0x1000 @ 0xb0204000 iwi2200: darwin_iwi2200 virt: 0x34da9000 physical: 0xb0204000 iwi2200: darwin_iwi2200 IRQ: 18, Vendor ID: 8086, Product ID: 4220 ApplePS2Trackpad: Synaptics TouchPad v5.9 iwi2200: setPowerState to 2 iwi2200: getCARD_CAPABILITIES 72 iwi2200: configureInterface darwin_iwi2200: Ethernet address 00:13:ce:VV:XX:YY iwi2200: dataLinkLayerAttachComplete iwi2200: getSTATUS_DEV iwi2200: ifnet_t en1 = 3af4604 iwi2200: old_mode 0 iwi2200: Radio disabled. iwi2200: QoS is enabled iwi2200: Hardware crypto [off] iwi2200: : Detected Intel PRO/Wireless 2200BG Network Connection iwi2200: boot firmware ok iwi2200: Microcode OK, rev. 53594 (0xd15a) dev. 3 (0x3) of 11/22/04 20:27 display: Not usable iwi2200: bss firmware ok iwi2200: Writing EEPROM data into SRAM iwi2200: getPOWER -986580942, 500 590744572 0 0 iwi2200: getSSID <hidden> l:616904008 iwi2200: getCHANNEL c:0 f:0 iwi2200: getBSSID <hidden> iwi2200: setPOWER 1, 1 1 1 1 iwi2200: power on iwi2200: getCHANNEL c:0 f:0 iwi2200: enabling netif... iwi2200: boot firmware ok iwi2200: Microcode OK, rev. 53594 (0xd15a) dev. 3 (0x3) of 11/22/04 20:27 iwi2200: bss firmware ok iwi2200: Writing EEPROM data into SRAM iwi2200: table 0 offset at 0x00000700, len = 67 iwi2200: table 1 offset at 0x00029600, len = 170 iwi2200: table 2 offset at 0x00029ee0, len = 6 iwi2200: geography 9 = ZZR iwi2200: Radio disabled by module parameter. iwi2200: trying to down the interface iwi2200: enabling netif... iwi2200: Unable to initialize device after 2 attempts. iwi2200: trying to down the interface iwi2200: enabling netif... iwi2200: Unable to initialize device after 2 attempts. iwi2200: trying to down the interface iwi2200: enabling netif... iwi2200: Unable to initialize device after 2 attempts. iwi2200: trying to down the interface Link to comment Share on other sites More sharing options...
jalavoui Posted January 19, 2007 Author Share Posted January 19, 2007 at this point the iwi2200 (see source) is using code that could be used in iwi2100 and iwi3945. i'm keeping the ieee80211 lib functions names to help developing other drivers. the first step in this project will be to allow associating open wireless networks (with no security) i still haven't find a way to get a valid ip after attaching to a wireless network. this version fixes the en0, en1 bug (that should work in laptops with a broken ethernet card) Link to comment Share on other sites More sharing options...
xkazu Posted January 19, 2007 Share Posted January 19, 2007 this is v5 of iwi2200.kext please post logs iwi2200: enabling netif... iwi2200: boot firmware ok iwi2200: Microcode OK, rev. 53594 (0xd15a) dev. 3 (0x3) of 11/22/04 20:27 iwi2200: bss firmware ok iwi2200: Writing EEPROM data into SRAM iwi2200: table 0 offset at 0x00000700, len = 67 iwi2200: table 1 offset at 0x00029600, len = 170 iwi2200: table 2 offset at 0x00029ee0, len = 6 iwi2200: geography 8 = ZZJ iwi2200: TX_POWER command (#35) 76 bytes: 0x00000003 iwi2200: Failed to send TX_POWER: Already sending a command. iwi2200: Failed to send TX_POWER: Already sending a command. iwi2200: Setting MAC address to 00:0e:35:ac:06:95 iwi2200: Failed to send ADAPTER_ADDRESS: Already sending a command. iwi2200: Configuring adapter .... iwi2200: Failed to send SYSTEM_CONFIG: Already sending a command. .... uhhm . response of first _ipw_send_cmd dont wait .(via isr) so next command cannot execute ... do you know the reason? Link to comment Share on other sites More sharing options...
Recommended Posts