AudioGod Posted July 27, 2019 Share Posted July 27, 2019 23 minutes ago, larabee said: Carbon copy cloner is real good. Nice one, 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683115 Share on other sites More sharing options...
glasgood Posted July 27, 2019 Author Share Posted July 27, 2019 45 minutes ago, AudioGod said: @glasgood Give this version of whatevergreen 1.3.1 a try buddy. it has fixes for the rx580 frame buffer and also clears up the purple lines at boot. its not full release and still at debug status but I've been running it since last night with no problem and have double made sure its good togo before sending it over to you. WhateverGreen-131.zip What's a good cloning tool for macos to copy my ssd with bro? It fixes the purple lines, but still have black screen on wake. It also resorts back to ATY,AMDRadeonFrambuffer. WhateverGreen-131 without SSDT-RX580 WhateverGreen-131 with SSDT-RX580 53 minutes ago, AudioGod said: @glasgood Give this version of whatevergreen 1.3.1 a try buddy. it has fixes for the rx580 frame buffer and also clears up the purple lines at boot. its not full release and still at debug status but I've been running it since last night with no problem and have double made sure its good togo before sending it over to you. WhateverGreen-131.zip What's a good cloning tool for macos to copy my ssd with bro? Did you test on your hack, black screen on wake from sleep ? not working on mine. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683116 Share on other sites More sharing options...
AudioGod Posted July 27, 2019 Share Posted July 27, 2019 (edited) 19 minutes ago, glasgood said: It fixes the purple lines, but still have black screen on wake. It also resorts back to ATY,AMDRadeonFrambuffer. WhateverGreen-131 without SSDT-RX580 WhateverGreen-131 with SSDT-RX580 Did you test on your hack, black screen on wake from sleep ? not working on mine. I actually was just trying that now for you. I put the rx580 back in and flipped my efi then made the changes using your ssdt and weg 1.3.1 and same thing. Black screen on wake. With the vega 56 everything is spot on perfect for me. Stupid rx580's, I'm gonna chuck mine out the window in a minute...hahaha Edited July 27, 2019 by AudioGod 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683122 Share on other sites More sharing options...
brucevan96 Posted July 28, 2019 Share Posted July 28, 2019 Hey, I am A first time Hackintosh builder here. I followed your guide step by step but when I try to boot from the USB, the screen goes black and goes right back to the select boot device. I've tried changing the BIOS settings around and also tried following guides from other people. Not sure what I'm doing wrong. If anyone can give help me out, it would be much appreciated. Thanks. Hardware: INTEL CORE I9 9900K Gigabyte Z390 AORUS PRO WIFI SAPPHIRE RADEON RX 580 NITRO+ 8GB DDR5 SAMSUNG 970 PRO 512GB M.2 COOLER MASTER HYPER 212 EVO EVGA 650WATT GQ PSU CORSAIR VENGENCE LPX 16GB DDR4 (2X8GB 3200 MHZ) CORSAIR 275R MID-TOWER CASE LG 21:9 25' ULTRAWIDE MONITOR 25UM58 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683209 Share on other sites More sharing options...
glasgood Posted July 28, 2019 Author Share Posted July 28, 2019 (edited) 36 minutes ago, brucevan96 said: Hey, I am A first time Hackintosh builder here. I followed your guide step by step but when I try to boot from the USB, the screen goes black and goes right back to the select boot device. I've tried changing the BIOS settings around and also tried following guides from other people. Not sure what I'm doing wrong. If anyone can give help me out, it would be much appreciated. Thanks. Hardware: INTEL CORE I9 9900K Gigabyte Z390 AORUS PRO WIFI SAPPHIRE RADEON RX 580 NITRO+ 8GB DDR5 SAMSUNG 970 PRO 512GB M.2 COOLER MASTER HYPER 212 EVO EVGA 650WATT GQ PSU CORSAIR VENGENCE LPX 16GB DDR4 (2X8GB 3200 MHZ) CORSAIR 275R MID-TOWER CASE LG 21:9 25' ULTRAWIDE MONITOR 25UM58 Hi, Choose the UEFI partition on USB Installer, if you choose the non UEFI partition then you will loop back to select boot device. Make sure you installed Clover onto the USB device. Edited July 28, 2019 by glasgood Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683214 Share on other sites More sharing options...
brucevan96 Posted July 28, 2019 Share Posted July 28, 2019 So this is what my boot option looks like. I also have clover installed and set up just the way the guide states. Am I missing something? I’ve went through all the notes as well and haven’t found anything. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683228 Share on other sites More sharing options...
mfortuna Posted July 28, 2019 Share Posted July 28, 2019 52 minutes ago, brucevan96 said: So this is what my boot option looks like. I also have clover installed and set up just the way the guide states. Am I missing something? I’ve went through all the notes as well and haven’t found anything. Did you change de BIOS settings? Maybe make again the bootable usb o you could try a different one 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683235 Share on other sites More sharing options...
allanau Posted July 29, 2019 Share Posted July 29, 2019 Hello! This was awesome guide! Just curious if this guide will still work with the Z390 AORUS ELITE version of the board? It's a little bit cheaper the difference is minor I think compare to the Pro version. Thanks! Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683247 Share on other sites More sharing options...
glasgood Posted July 29, 2019 Author Share Posted July 29, 2019 50 minutes ago, allanau said: Hello! This was awesome guide! Just curious if this guide will still work with the Z390 AORUS ELITE version of the board? It's a little bit cheaper the difference is minor I think compare to the Pro version. Thanks! It should work. The USB layout on the back of the board is different, so you will have to create your own USB ( SSDT or USBports.kext ) fix using hackintool. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683251 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 @glasgood Whats gone wrong for me if I can no longer open jpegs via preview? this is on my vega56 buddy. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683325 Share on other sites More sharing options...
glasgood Posted July 29, 2019 Author Share Posted July 29, 2019 6 minutes ago, AudioGod said: @glasgood Whats gone wrong for me if I can no longer open jpegs via preview? this is on my vega56 buddy. NoVPAJpeg.kext below should sort that NoVPAJpeg.kext.zip 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683326 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 8 minutes ago, glasgood said: NoVPAJpeg.kext below should sort that NoVPAJpeg.kext.zip Perfect thank you. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683330 Share on other sites More sharing options...
larabee Posted July 29, 2019 Share Posted July 29, 2019 54 minutes ago, AudioGod said: @glasgood Whats gone wrong for me if I can no longer open jpegs via preview? this is on my vega56 buddy. Avoid NoVPAJPEG kext if needed because it just disable hardware acceleration when opening jpeg. Use hackintool, check if VDA decoder is fully supported or not. If you cannot open jpeg, it will likely say not supported. If you're using iMac pro 1.1 like I am, then double check the Clover config if you have removed all things related to iGPU (device properties, boot flag, injection, etc.) and completely disable it in bios. Do a restart and you will see VDA hardware acce. is fully supported even though the iGPU info is missing. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683336 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 17 minutes ago, larabee said: Avoid NoVPAJPEG kext if needed because it just disable hardware acceleration when opening jpeg. Use hackintool, check if VDA decoder is fully supported or not. If you cannot open jpeg, it will likely say not supported. If you're using iMac pro 1.1 like I am, then double check the Clover config if you have removed all things related to iGPU (device properties, boot flag, injection, etc.) and completely disable it in bios. Do a restart and you will see VDA hardware acce. is fully supported even though the iGPU info is missing. I must be missing something as I can't find any traces of the old igpu settings but I'm far from clover literate so would you mind flicking your eyes over my config and see if you can spot it for me please buddy? config.plist Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683339 Share on other sites More sharing options...
larabee Posted July 29, 2019 Share Posted July 29, 2019 11 minutes ago, AudioGod said: I must be missing something as I can't find any traces of the old igpu settings but I'm far from clover literate so would you mind flicking your eyes over my config and see if you can spot it for me please buddy? config.plist I don't see anything wrong with it except those ??? in the device properties that raise some concern. I ran into your problem before when change the SMBIOS to iMac Pro 1.1 and cannot open JPEG. All I did was removing all things related to iGPU and it works well again. Here is my config file (warning: I still run 10.14.5 18F132 and on older version of clover) config.plist Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683343 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 (edited) 19 minutes ago, larabee said: I don't see anything wrong with it except those ??? in the device properties that raise some concern. I ran into your problem before when change the SMBIOS to iMac Pro 1.1 and cannot open JPEG. All I did was removing all things related to iGPU and it works well again. Here is my config file (warning: I still run 10.14.5 18F132 and on older version of clover) config.plist The only thing I can spot and it might also explain the ??? Is it's still showing my gpu as a second card in pci info so I will try redoing that in a mo and see if it helps. @glasgood What device properties do I need to keep hold of for your config? Was it the sound card and anything else? Edited July 29, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683349 Share on other sites More sharing options...
larabee Posted July 29, 2019 Share Posted July 29, 2019 6 minutes ago, AudioGod said: The only thing I can spot and it might also explain the ??? Is it's still showing my gpu as a second card in pci info so I will try redoing that in a mo and see if it helps. Can you try taking out the GPU device properties to see if it works. I don't have any GPU PCI info on my config because I'm too lazy to export everything, so I reuse Glasgood config and remove anything GPU related since glasgood is using a different card. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683353 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 (edited) 23 minutes ago, larabee said: Can you try taking out the GPU device properties to see if it works. I don't have any GPU PCI info on my config because I'm too lazy to export everything, so I reuse Glasgood config and remove anything GPU related since glasgood is using a different card. Removed it all and same result. I've done a side by side of my pci info and yours and can't find anything. I've just also tried copying your pci info over to mine to totally wipe that out and same result but now I know its not that. I can't find anything in clover and the IGPU is completely disabled in the bios so I'm abit lost now...lol Edited July 29, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683357 Share on other sites More sharing options...
glasgood Posted July 29, 2019 Author Share Posted July 29, 2019 20 minutes ago, AudioGod said: The only thing I can spot and it might also explain the ??? Is it's still showing my gpu as a second card in pci info so I will try redoing that in a mo and see if it helps. @glasgood What device properties do I need to keep hold of for your config? Was it the sound card and anything else? Audio ID is injected in properties, so you want to keep that one. The others you can remove and add back at a later date. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683358 Share on other sites More sharing options...
larabee Posted July 29, 2019 Share Posted July 29, 2019 16 minutes ago, AudioGod said: Removed it all and same result. I've done a side by side of my pci info and yours and can't find anything. I've just also tried copying your pci info over to mine to totally wipe that out and same result but now I know its not that. I can't find anything in clover and the IGPU is completely disabled in the bios so I'm abit lost now...lol hum... let me just upload my entire EFI here (minus the SMBIOS and serial etc.) so you can try on yours, remember to port in all of your working SMBIOS and system parameters. Note: I'm still on older versions. EFI.zip 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683367 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 7 minutes ago, larabee said: hum... let me just upload my entire EFI here (minus the SMBIOS and serial etc.) so you can try on yours, remember to port in all of your working SMBIOS and system parameters. Note: I'm still on older versions. EFI.zip Thanks buddy I will give that a crack soon and report back. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683368 Share on other sites More sharing options...
larabee Posted July 29, 2019 Share Posted July 29, 2019 29 minutes ago, AudioGod said: Thanks buddy I will give that a crack soon and report back. If it's not working, maybe you can upload your EFI here so I can sync up with you again. We have identical hardware so making yours work is not a big problem. 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683371 Share on other sites More sharing options...
Cipha Posted July 29, 2019 Share Posted July 29, 2019 Update to the USB port issue. I found another tutorial and created a custom SSDT with Hackintool and this time it is working. I still don't know why yours didn't work but in the tutorial is mentioned to remove "change XHCI to XHC" from boot flags. The tutorial also stated to move SSDT-EC.aml from Hackintool to the EFI folder. Might one of these two points be the issue? If anybody has still Issues with Ports, here's my SSDT (no USB-C mapped since I don't use it). SSDT Aorus Pro.zip 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683374 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 45 minutes ago, larabee said: If it's not working, maybe you can upload your EFI here so I can sync up with you again. We have identical hardware so making yours work is not a big problem. Bingo brother, Your efi totally works so what on earth is going on with mine? I still get the ??? in display properties in Hackintool but I think that's just the newer version showing ??? instead of unknown. I am now going too update your EFI and bring everything back to how I had it and see if it all goes wrong again or holds good. Il send back the EFI to you once I've made my changes to it. I see Your using my USB Config cos my weird setup is singing along as normal so time saved there yay...lol Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683376 Share on other sites More sharing options...
AudioGod Posted July 29, 2019 Share Posted July 29, 2019 (edited) @larabee All updated and changed to the way I have it setup and still the GPU is fine now. WTF???? Again I compared the two EFI's and they both look the same.....lol...weird stuff anyway here's a copy of your EFI updated with all the latest kexts including the purple strips fix at boot (whatevergreen 1.3.1) and the latest clover etc etc Thanks Buddy your a star EFI.zip Edited July 29, 2019 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/40/#findComment-2683378 Share on other sites More sharing options...
Recommended Posts