Jump to content
giacomo.dessi2303

Asus F550CC-XX382H DSDT

95 posts in this topic

Recommended Posts

Buongiorno a tutti :) sono un nuovo utente del forum e avrei bisogno di aiuto. Ho installato sierra sul mio laptop che ha le seguenti caratteristiche:

Scheda video: intel hd graphics 3000 + NVIDIA GeForce GT 720M (so già che la scheda Nvidia non funzionerà)

Scheda audio: Intel High Definition Audio

Scheda di rete: 802.11b/g/n

 

Questo è ciò che funziona e ciò che non funziona:

Audio (OK)

WebCam (OK)

Ethernet (OK)

Graphics (OK)

Touchpad (OK)

Keyboard (OK)

WiFi (OK)

USB (OK)

Bootloader (OK)

Battery (NO)

Microphone (NO)

Brightness (NO)

Bluetooth (NO)

SD Card Reader (NO)

 

​Non è che qualcuno di voi riuscirebbe a sistemarmi il DSDT in modo che il  portatile funzioni correttamente con sierra? Grazie in anticipo :)

 

CLOVER + DSDT.zip

Share this post


Link to post
Share on other sites
Advertisement

@gengik84 Ti ho allegato la cartella di Clover, all'interno c'è anche il dsdt.. non mi permette il forum di allegare due file.. se vuoi te lo carico separatamente su drive, per l'audio ho usato VoodooHDA.kext

Share this post


Link to post
Share on other sites

Ok, fatto, messo tutto in un unico file zip


@gengik84 Ho usato la guida vanilla consigliata dal gruppo Facebook Italian hackintosh Group e ho installato i vari Kext con Kext utility

Share this post


Link to post
Share on other sites

Il lettore di schede dovrebbe essere supportato da questo kext: http://www.insanelymac.com/forum/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers/page-3?do=findComment&comment=2376387

Opinione personale: metti se possibile i kext nella EFI e non in S/L/E (che dovrebbe contenere solo quelli "ufficiali").

Share this post


Link to post
Share on other sites

@gengik84 grazie mille :) ora la luminosità funziona perfettamente, ma la batteria no.. mostra la percentuale al 97% quando la batteria dovrebbe essere carica del tutto, poi se disconnetto l'alimentatore il pc si riavvia.. poi all'accensione la barra di caricamento di macOS carica fino a metà, lo schermo lampeggia e vado alla pagina di login (quest'ultimo problema lo faceva anche prima.. non è che riesci a fixare anche questo? Sennò non fa niente)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By bell47
      Hello
       
      I'm French, so excuse me for the approximate language......

      I was on Mountain Lion without problems and I installed a new Sierra system with Clover and rebooted with the key but when I remove the Clover USB key no longer "sees" my hard drive.
      "loading operating system" then black screen.
      Anybody got any ideas?
      Thank you
       
      Gigabyte H61N-USB3 F8
       Intel Core i5
       Mémory    8 Go
       
    • By iammask
      Requirements
      Pendrive 2.0 (>=8GB) "Install macOS Sierra app" (https://itunes.apple.com/de/app/macos-sierra/id1127487414?l=en)(Around 5GB) Working Mac  
      Installing Clover to USB
      Get a USB 2.0 Pendrive (8GB and above)
      Before you can partition the USB, you must determine what the disk identifier is. With the USB plugged in to the computer, use 'diskutil list':

      In Terminal:
      diskutil list In my case, output:
      /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage MacOS 500.4 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s5 4: Microsoft Basic Data DATA 498.8 GB disk0s4 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: Pendrive *8.0 GB disk1 As you can see my pendrive is available at /dev/disk1 (check yours).
      Now we are going to create partitions, In Terminal:
      diskutil partitionDisk /dev/disk1 1 GPT HFS+J "install_macos" R Output:
      Started partitioning on disk1 Unmounting disk Creating the partition map Waiting for the disks to reappear Formatting disk1s2 as Mac OS Extended (Journaled) with name install_osx Initialized /dev/rdisk1s2 as a 7 GB case-insensitive HFS Plus volume with a 8192k journal Mounting disk Finished partitioning on disk1 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *8.0 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_HFS install_macos 7.7 GB disk1s2 Now as you can see partitions are created and your pendrive is ready to install clover.
      Download the Clover installer. Current builds are available on sourceforge: http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded) 
      After Downloading the Clover installer,
      Install it to the Target "install_macos" partition  using "Change Install Location". Select "Customize". Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically selected. Check "BGM" from Themes. Check "AptioMemoryFix.efi", "EmuVariableUefi-64.efi", "OsxFatBinaryDrv-64.efi" from Drivers64UEFI. After making your selections, Click "Install". Finally, one more EFI driver is needed, HFSPlus.efi:
      Download from : https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi. Copy to /EFI/Clover/drivers64UEFI.  
      Kext Setup
      Remove all folders from EFI/CLOVER/kexts/ except 'Other'. Now Download These, FakeSMC.kext: https://github.com/RehabMan/OS-X-FakeSMC-kozlek VoodooPS2Controller.kext: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller USBInjectAll.kext: https://github.com/RehabMan/OS-X-USB-Inject-All Lilu.kext: https://github.com/vit9696/Lilu IntelGraphicsFixup.kext: https://github.com/lvs1974/IntelGraphicsFixup RealtekRTL8100.kext: https://www.insanelymac.com/forum/files/file/259-realtekrtl8100-binary/  
      Setting config.plist
      Download it from the attachments, Unzip and replace EFI/CLOVER/config.plist
       
      Building the MacOS Installer
      In Terminal : 
      sudo "/Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_macos --applicationpath "/Applications/Install macOS Sierra.app" --nointeraction sudo diskutil rename "Install macOS Sierra" install_macos Now your Bootable USB is ready to install. Turn off your Laptop.
       
      Installing 
      Make sure you have adequate bios settings
       
      Then Follow:
      Power on laptop with pendrive connected to it. Continuously press "ESC". Select "Boot From USB" (i.e. F9) and select pendrive from the menu. Now it boots into Clover, with left-right arrow, select options. Select "Graphics Injector Menu". Under "Inject Intel" select "FakeID" and replace "0x00000000" to "0x12345678". Now return to main screen and select "install_macos". When grey screen comes, select DiskUtility. Format whole Hard Disk as "Mac Os Extended (Journaled)" with Name as "MacOS" Now quit DiskUtility and click "Install Mac OS Sierra" and select the newly created partition in previous step. Now installer will begin installing files (~15-20mins) and the restart. After restart again boot into clover(Follow Step 1-5) and again select "install_macos". Now Install screen will appear and continue installation. This time installer will install files to your target partition and create Recovery HD partition. Later on restarts. After restart again boot into clover(Follow Step 1-5) and again select "MacOS". If everything goes well, you will finish up the installation process and arrive at the Mac OS Sierra desktop.  
      Install clover to hdd.
      Congratulations!! Your Installation is complete!! 
      Now you need to fix things one by one.
       
      Will Provide fixes when I get time.
      config.plist.zip
×