leVel Posted July 25, 2018 Share Posted July 25, 2018 (edited) On 7/9/2018 at 8:22 PM, MaLd0n said: try without a wifi card first, take a shot, don't appears a correct device in wake, we need discovery what device cause it @MaLd0n Just made a 2nd beer contribution After two weeks of trial and error I was FINALLY able to get my hackintosh to sleep by creating a custom SSDT for USBInjectAll.kext Now, what is the best way to use my SSDT patch with your DSDT patch? Do you need me to send a new RunMe with the SSDT patch applied? I have installed a new BIOS... We are so close to the perfect hackintosh! Thanks you! Edited July 25, 2018 by leVel Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627505 Share on other sites More sharing options...
o0Prince0o Posted July 25, 2018 Share Posted July 25, 2018 6 hours ago, MaLd0n said: CLOVER.zip read here https://www.insanelymac.com/forum/topic/334899-guide-intel-framebuffer-patching-for-mojave/ I read and i changed the ig-platform-id to the correct one and that didn't work so which patch do I need for mine? 1 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627511 Share on other sites More sharing options...
Jobe5150 Posted July 25, 2018 Share Posted July 25, 2018 6 hours ago, MaLd0n said: put in clover/kexts/other this kext work only for hdmi audio VoodooHDA.kext.zip Thank you again for all your help. All I am using is my 1050Ti, not using onboard video, but using the onboard Audio. So voodoo is my only option for HDMI/DP Audio? Thanks! Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627515 Share on other sites More sharing options...
MaLd0n Posted July 25, 2018 Author Share Posted July 25, 2018 1 hour ago, leVel said: @MaLd0n Just made a 2nd beer contribution After two weeks of trial and error I was FINALLY able to get my hackintosh to sleep by creating a custom SSDT for USBInjectAll.kext Now, what is the best way to use my SSDT patch with your DSDT patch? Do you need me to send a new RunMe with the SSDT patch applied? I have installed a new BIOS... We are so close to the perfect hackintosh! Thanks you! if nu update bios, extract new tables with F4 key in clover boot screen, boot into system and run my app, i edit new bios 53 minutes ago, o0Prince0o said: I read and i changed the ig-platform-id to the correct one and that didn't work so which patch do I need for mine? need check this post, is a new way 31 minutes ago, Jobe5150 said: Thank you again for all your help. All I am using is my 1050Ti, not using onboard video, but using the onboard Audio. So voodoo is my only option for HDMI/DP Audio? Thanks! hdmi yes, dp work with web driver Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627516 Share on other sites More sharing options...
leVel Posted July 25, 2018 Share Posted July 25, 2018 Just now, MaLd0n said: if nu update bios, extract new tables with F4 key in clover boot screen, boot into system and run my app, i edit new bios Is it OK to use the SSDT when running the RunMe app? Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627517 Share on other sites More sharing options...
MaLd0n Posted July 25, 2018 Author Share Posted July 25, 2018 54 minutes ago, leVel said: Is it OK to use the SSDT when running the RunMe app? yes, no problem u can use it with my DSDT too, is just for USB Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627520 Share on other sites More sharing options...
Jobe5150 Posted July 25, 2018 Share Posted July 25, 2018 (edited) 1 hour ago, MaLd0n said: hdmi yes, dp work with web driver I use DP. Uninstalled then reinstalled web driver. No HDMI/DP output. Only using 1050Ti, onboard GPU is disabled. VooDoo kext confirmed, shows all audio, works as needed, sounds bad tho. I just can't figure out what is stopping it from being an option as output. I prefer to use AppleALC as I am currently using now. Edited July 25, 2018 by Jobe5150 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627522 Share on other sites More sharing options...
Jobe5150 Posted July 26, 2018 Share Posted July 26, 2018 6 hours ago, MaLd0n said: hdmi yes, dp work with web driver I got it working, thank you again! I have both AppleALC and Voodoo installed and my Surround and DP Audio work just fine! Beer money incoming! Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627538 Share on other sites More sharing options...
beesir Posted July 26, 2018 Share Posted July 26, 2018 11 hours ago, MaLd0n said: run my updated app RunMe.app 我的能看下嘛 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627539 Share on other sites More sharing options...
leVel Posted July 26, 2018 Share Posted July 26, 2018 (edited) On 7/25/2018 at 10:11 PM, MaLd0n said: yes, no problem u can use it with my DSDT too, is just for USB Ok @MaLd0n - attached new RunMe with fresh ACPI tables from newest BIOS.. Also you will notice the USB SSDT which fixed my sleep issues. Thanks again my friend! Edited July 30, 2018 by leVel Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627541 Share on other sites More sharing options...
awert_65 Posted July 26, 2018 Share Posted July 26, 2018 (edited) Anyone has experience of getting ASmedia USB 3.1 Controller built on motherboard working with hackintosh? I just get ASUS TUF Z370-Plus Gaming, installing High Sierra 10.13.6 and it works fine without 'Asmedia USB 3.1 Controller' enabled. This controller is powered by a ASMedia ASM1142 chip. When enabled, an ACPI exception error has occurred during booting like the following:https://ibb.co/bXoN9T or the attached one thx here's the spec: Motherboard: ASUS TUF Z370-Plus Gaming CPU: Intel I5-8400 RAM: 16 GB Concrete Graphic Card: EVGA Nvidia Geforce 1060 GTX 6GB HDD or SSD: Samsung EVO 960 500GB x1 + WD 1TB HDD Edited July 26, 2018 by awert_65 Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627543 Share on other sites More sharing options...
gader Posted July 26, 2018 Share Posted July 26, 2018 I just wanted to thank you again MaLd0n, for your help in my config Now it works perfect. Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627597 Share on other sites More sharing options...
MaLd0n Posted July 26, 2018 Author Share Posted July 26, 2018 17 hours ago, leVel said: Ok @MaLd0n - attached new RunMe with fresh ACPI tables from newest BIOS.. Also you will notice the USB SSDT which fixed my sleep issues. Thanks again my friend! Send me HackPro.lan.zip DSDT.aml.zip new files after reboot 17 hours ago, awert_65 said: Anyone has experience of getting ASmedia USB 3.1 Controller built on motherboard working with hackintosh? I just get ASUS TUF Z370-Plus Gaming, installing High Sierra 10.13.6 and it works fine without 'Asmedia USB 3.1 Controller' enabled. This controller is powered by a ASMedia ASM1142 chip. When enabled, an ACPI exception error has occurred during booting like the following:https://ibb.co/bXoN9T or the attached one thx here's the spec: Motherboard: ASUS TUF Z370-Plus Gaming CPU: Intel I5-8400 RAM: 16 GB Concrete Graphic Card: EVGA Nvidia Geforce 1060 GTX 6GB HDD or SSD: Samsung EVO 960 500GB x1 + WD 1TB HDD post ur files RunMe.app 59 minutes ago, gader said: I just wanted to thank you again MaLd0n, for your help in my config Now it works perfect. welcome enjoy Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627600 Share on other sites More sharing options...
leVel Posted July 26, 2018 Share Posted July 26, 2018 1 minute ago, MaLd0n said: DSDT.aml.zip new files after reboot post ur files RunMe.app welcome enjoy Do I leave the SSDT in /EFI/ACPI/Patched? Alongside the DSDT? Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627601 Share on other sites More sharing options...
MaLd0n Posted July 26, 2018 Author Share Posted July 26, 2018 5 minutes ago, leVel said: Do I leave the SSDT in /EFI/ACPI/Patched? Alongside the DSDT? use both, dsdt and ur ssdt for usb Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627602 Share on other sites More sharing options...
leVel Posted July 26, 2018 Share Posted July 26, 2018 33 minutes ago, MaLd0n said: use both, dsdt and ur ssdt for usb Ok. Here we go. Send me HackPro.lan.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627603 Share on other sites More sharing options...
MaLd0n Posted July 26, 2018 Author Share Posted July 26, 2018 32 minutes ago, leVel said: Ok. Here we go. Send me HackPro.lan.zip looks good but have some errors about usb, i think ur ssdt is not perfect Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627606 Share on other sites More sharing options...
leVel Posted July 27, 2018 Share Posted July 27, 2018 (edited) 46 minutes ago, MaLd0n said: looks good but have some errors about usb, i think ur ssdt is not perfect Interesting. I rewrote the ssdt last night to make sure I didn't mess anything up. Perhaps I need to run through it a 3rd time. I removed a usb2/usb3 port to remain at the 15 port limit in the SSDT and turned off the USB port in the bios. Is it a good idea to remove 1 more port to be UNDER the 15 port limit? Also, is there any advantage to turning off the ports with the uia_disable flag instead of the SSDT? USED PORTS: HS03 HS04 HS05 HS06 HS08 HS09 <- removed in SSDT + turned off in bios HS10 HS11 HS14 (Buetooth Module) SS01 SS02 SS03 SS04 SS05 SS06 SS07 SS08 <- removed in SSDT + turned off in bios UNUSED PORTS: HS01 HS02 HS07 HS12 HS13 SS09 SS10 USR1 USR2 Edited July 27, 2018 by leVel Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627612 Share on other sites More sharing options...
leVel Posted July 27, 2018 Share Posted July 27, 2018 8 minutes ago, leVel said: Interesting. I rewrote the ssdt last night to make sure I didn't mess anything up. Perhaps I need to run through it a 3rd time. I removed a usb2/usb3 port to remain at the 15 port limit in the SSDT and turned off the USB port in the bios. Is it a good idea to remove 1 more port to be UNDER the 15 port limit? Also, is there any advantage to turning off the ports with the uia_disable flag instead of the SSDT? USED PORTS: HS03 HS04 HS05 HS06 HS08 HS09 <- removed in SSDT + turned off in bios HS10 HS11 HS14 (Buetooth Module) SS01 SS02 SS03 SS04 SS05 SS06 SS07 SS08 <- removed in SSDT + turned off in bios UNUSED PORTS: HS01 HS02 HS07 HS12 HS13 SS09 SS10 USR1 USR2 I think I can also turn off EHC1->EH01 and EHC2->EH02 rename in clover config... Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627613 Share on other sites More sharing options...
MaLd0n Posted July 27, 2018 Author Share Posted July 27, 2018 skylake+ don't have more EHCI, only XHCI now try to use only patch com.apple.driver.usb.AppleUSBXHCI837D880F 0F83A704 0000837D880F 90909090 9090USB 10.13.6 by PMHeart10.13.6 + USBINJECTALL+XHCI200 SERIES Arquivo Comprimido.zip and extract one SEND_ME Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627615 Share on other sites More sharing options...
awert_65 Posted July 27, 2018 Share Posted July 27, 2018 2 hours ago, MaLd0n said: post ur files Ok, Here are the kext installed in /EFI/Clover/Kexts/Others AppleALC.kext BrcmFirmwareData.kext BrcmPatchRAM2.kext FakeSMC_ACPISensors.kext FakeSMC_CPUSensors.kext FakeSMC_GPUSensors.kext FakeSMC_LPCSensors.kext FakeSMC.kext IntelMausiEthernet.kext Lilu.kext NvidiaGraphicsFixup.kext USBInjectAll.kext XHCI-300-series-injector.kext Other folders located (/EFI/Clover/Kexts) are empty (10.13, 10.14..., etc) Clover Config is attached No DSDT file Clover just dynamic loading ACPI table and patching it according to the Clover setting config The setting config file is attached Thx config.plist Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627617 Share on other sites More sharing options...
fryysyd Posted July 27, 2018 Share Posted July 27, 2018 @MaLd0n Please! Thanks a lot! Send me iMac.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627625 Share on other sites More sharing options...
MaLd0n Posted July 27, 2018 Author Share Posted July 27, 2018 1 hour ago, awert_65 said: Ok, Here are the kext installed in /EFI/Clover/Kexts/Others AppleALC.kext BrcmFirmwareData.kext BrcmPatchRAM2.kext FakeSMC_ACPISensors.kext FakeSMC_CPUSensors.kext FakeSMC_GPUSensors.kext FakeSMC_LPCSensors.kext FakeSMC.kext IntelMausiEthernet.kext Lilu.kext NvidiaGraphicsFixup.kext USBInjectAll.kext XHCI-300-series-injector.kext Other folders located (/EFI/Clover/Kexts) are empty (10.13, 10.14..., etc) Clover Config is attached No DSDT file Clover just dynamic loading ACPI table and patching it according to the Clover setting config The setting config file is attached Thx config.plist DSDT is bios run my app and post full dump, check first post Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627626 Share on other sites More sharing options...
MaLd0n Posted July 27, 2018 Author Share Posted July 27, 2018 32 minutes ago, fryysyd said: @MaLd0n Please! Thanks a lot! Send me iMac.zip DSDT.aml.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627630 Share on other sites More sharing options...
leVel Posted July 27, 2018 Share Posted July 27, 2018 2 hours ago, MaLd0n said: skylake+ don't have more EHCI, only XHCI now try to use only patch com.apple.driver.usb.AppleUSBXHCI837D880F 0F83A704 0000837D880F 90909090 9090USB 10.13.6 by PMHeart10.13.6 + USBINJECTALL+XHCI200 SERIES Arquivo Comprimido.zip and extract one SEND_ME Ok. @MaLd0n 1) I turned on all USB ports in BIOS 2) Removed custom USB SSDT patch 3) Removed EHCI patch from clover config 4) Added PMHeart 10.13.6 patch 5) Replaced Kexts with yours Looks like sleep is working without the SSDT now... RunMe attached. After this I leave you alone. I have bothered you enough. I am very grateful for your assistance. Send me HackPro.lan.zip Link to comment https://www.insanelymac.com/forum/topic/321872-guide-catalina-bigsur-monterey-on-mobos-serie-100-200-300-400-500-600-skylake-kabylake-coffeelake-cometlake-rocketlake-alderlake-dsdt/page/150/#findComment-2627635 Share on other sites More sharing options...
Recommended Posts