Jump to content
spec3

[Aiuto] Sapphire nitro R7 370 2Gb

7 posts in this topic

Recommended Posts

Ciao,

 

Qualcuno potrebbe aiutarmi con questa scheda? non riesco a farla andare su Sierra. Con la scheda riesco ad entrare nel sistema operativo ma sfarfalla tutto e ho disponibile solo una risoluzione. Sto utilizzando Clover su una scheda madre  asrock h110m hdv

 

 

grazie

Share this post


Link to post
Share on other sites
Advertisement

Ora in realta' il conifg e' settato perche' funzioni la scheda interna della mobo (inject Intel e il numero ig-platform), ho utlizzato proprio la tua guida per asrock h110m, la scheda video viene utilizzata con hdmi (l'audio dell'hdmi non e' importante).

 

Grazie

Share this post


Link to post
Share on other sites

prova 

 

nel config/Graphic

 

FB metti Futomaki

ports 4

vram 2048

inject ati, togli intel


dovrebbe avere lo stesso chip della 7000 e r9 270

id 0x68101002

 

controlla


e prova su uscita dvi

Share this post


Link to post
Share on other sites

Credo che 0x68101002 corrisponde alla R9 270x

Mentre la R7 370= R9 270 (non X) che ha ID atipici 0x68111002 che non è contenuto nei kext

Nel caso, da provare un FakeID...

Comunque spero di sbagliarmi...

Share this post


Link to post
Share on other sites
Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By bell47
      Hello
       
      I'm French, so excuse me for the approximate language......

      I was on Mountain Lion without problems and I installed a new Sierra system with Clover and rebooted with the key but when I remove the Clover USB key no longer "sees" my hard drive.
      "loading operating system" then black screen.
      Anybody got any ideas?
      Thank you
       
      Gigabyte H61N-USB3 F8
       Intel Core i5
       Mémory    8 Go
       
    • By iammask
      Requirements
      Pendrive 2.0 (>=8GB) "Install macOS Sierra app" (https://itunes.apple.com/de/app/macos-sierra/id1127487414?l=en)(Around 5GB) Working Mac  
      Installing Clover to USB
      Get a USB 2.0 Pendrive (8GB and above)
      Before you can partition the USB, you must determine what the disk identifier is. With the USB plugged in to the computer, use 'diskutil list':

      In Terminal:
      diskutil list In my case, output:
      /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage MacOS 500.4 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s5 4: Microsoft Basic Data DATA 498.8 GB disk0s4 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: Pendrive *8.0 GB disk1 As you can see my pendrive is available at /dev/disk1 (check yours).
      Now we are going to create partitions, In Terminal:
      diskutil partitionDisk /dev/disk1 1 GPT HFS+J "install_macos" R Output:
      Started partitioning on disk1 Unmounting disk Creating the partition map Waiting for the disks to reappear Formatting disk1s2 as Mac OS Extended (Journaled) with name install_osx Initialized /dev/rdisk1s2 as a 7 GB case-insensitive HFS Plus volume with a 8192k journal Mounting disk Finished partitioning on disk1 /dev/disk1 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *8.0 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_HFS install_macos 7.7 GB disk1s2 Now as you can see partitions are created and your pendrive is ready to install clover.
      Download the Clover installer. Current builds are available on sourceforge: http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded) 
      After Downloading the Clover installer,
      Install it to the Target "install_macos" partition  using "Change Install Location". Select "Customize". Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically selected. Check "BGM" from Themes. Check "AptioMemoryFix.efi", "EmuVariableUefi-64.efi", "OsxFatBinaryDrv-64.efi" from Drivers64UEFI. After making your selections, Click "Install". Finally, one more EFI driver is needed, HFSPlus.efi:
      Download from : https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi. Copy to /EFI/Clover/drivers64UEFI.  
      Kext Setup
      Remove all folders from EFI/CLOVER/kexts/ except 'Other'. Now Download These, FakeSMC.kext: https://github.com/RehabMan/OS-X-FakeSMC-kozlek VoodooPS2Controller.kext: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller USBInjectAll.kext: https://github.com/RehabMan/OS-X-USB-Inject-All Lilu.kext: https://github.com/vit9696/Lilu IntelGraphicsFixup.kext: https://github.com/lvs1974/IntelGraphicsFixup RealtekRTL8100.kext: https://www.insanelymac.com/forum/files/file/259-realtekrtl8100-binary/  
      Setting config.plist
      Download it from the attachments, Unzip and replace EFI/CLOVER/config.plist
       
      Building the MacOS Installer
      In Terminal : 
      sudo "/Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia" --volume /Volumes/install_macos --applicationpath "/Applications/Install macOS Sierra.app" --nointeraction sudo diskutil rename "Install macOS Sierra" install_macos Now your Bootable USB is ready to install. Turn off your Laptop.
       
      Installing 
      Make sure you have adequate bios settings
       
      Then Follow:
      Power on laptop with pendrive connected to it. Continuously press "ESC". Select "Boot From USB" (i.e. F9) and select pendrive from the menu. Now it boots into Clover, with left-right arrow, select options. Select "Graphics Injector Menu". Under "Inject Intel" select "FakeID" and replace "0x00000000" to "0x12345678". Now return to main screen and select "install_macos". When grey screen comes, select DiskUtility. Format whole Hard Disk as "Mac Os Extended (Journaled)" with Name as "MacOS" Now quit DiskUtility and click "Install Mac OS Sierra" and select the newly created partition in previous step. Now installer will begin installing files (~15-20mins) and the restart. After restart again boot into clover(Follow Step 1-5) and again select "install_macos". Now Install screen will appear and continue installation. This time installer will install files to your target partition and create Recovery HD partition. Later on restarts. After restart again boot into clover(Follow Step 1-5) and again select "MacOS". If everything goes well, you will finish up the installation process and arrive at the Mac OS Sierra desktop.  
      Install clover to hdd.
      Congratulations!! Your Installation is complete!! 
      Now you need to fix things one by one.
       
      Will Provide fixes when I get time.
      config.plist.zip
    • By fantomas1
      Hi InsanelyMacaholics   

      Use this thread to link / talk about of the future Nvidia Web Driver updates for macOS Sierra.
       
      10.12.6
      Nvidia Web Driver - 378.02.02.25f10 --> build 16G1510 (thanks to BreBo)  New!
      Nvidia Web Driver - 378.02.02.25f09 --> build 16G1408 (thanks to BreBo)
      Nvidia Web Driver - 378.02.02.25f08 --> build 16G1314 (thanks to BreBo)
      Nvidia Web Driver - 378.02.02.25f07 --> build 16G1314 (thanks to haring)
      Nvidia Web Driver - 378.05.05.25f06 --> build 16G1212 (thanks to WeBeRiO)
      Nvidia Web Driver - 378.05.05.25f04 --> build 16G1114 (thanks to lukazm)
      Nvidia Web Driver - 378.05.05.25f03 --> build 16G1036 (thanks to Gradou)
      Nvidia Web Driver - 378.05.05.25f01 --> build 16G29 (thanks to Badruzeus)
       
       
      10.12.5
      Nvidia Web Driver - 378.05.05.15f01 --> build 16F73 (see this post)
       
       
      10.12.4
      Nvidia Web Driver - 378.05.05.05f02 --> build 16E195(thanks to crachmaster4999)
      Nvidia Web Driver - 378.05.05.05f01 --> build 16E195 (thanks to Moviemakergr)  Pascal support!!!
      Nvidia Web Driver - 367.15.10.45f01 --> build 16E195 (thanks to Lanc)
       
       
      10.12.3

      Nvidia Web Driver - 367.15.10.35f01 --> build 16D32 (thanks to shatterhenner)
       
       
      10.12.2
      Nvidia Web Driver - 367.15.10.25f02 --> build 16C68 (see this post)
      Nvidia Web Driver - 367.15.10.25f01 --> build 16C67 (see this post)
      Nvidia Web Driver - 367.15.10.25b06 --> build 16C60b/16C63a (see this post)
       
       
      10.12.1
      Nvidia Web Driver - 367.15.10.15f03 --> build 16B2657/16B2659 (thanks to Moviemakergr).
      Nvidia Web Driver - 367.15.10.15f01 --> build 16B2555 (thanks to Moviemakergr)
       
       
      10.12.0
      Nvidia Web Driver - 367.15.10.05f01 --> build 16A323 (thanks to phi777)
       
       
      GM
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A323 (same driver since DP4/PB3)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A322 (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A320 (see this post)
       
       
      DP/PB
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A313a (DP8 & PB7) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A304a (DP7 & PB6) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A294a (DP6 & PB5) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A286a (DP5 & PB4) (see this post)
      Nvidia Web Driver - 367.10.10.05b01 --> build 16A270f (DP4 & PB3) (thanks to TheRacerMaster)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A254g (DP3 & PB2) (see this post)
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A238m (PB1) (thanks to Faun) 
      Nvidia Web Driver - 367.05.10.05b07 --> build 16A239j (DP2) (thanks to Faun)
      Nvidia Web Driver - 367.05.10.05b03 --> build 16A201w (DP1) (thanks to Xmedik)
       
    • By IPN96
      Ciao mi scuso per il disturbo, io vorrei abilitare la mia scheda grafica Nvidia geforce gtx 950m per avere delle prestazioni migliori quando lavoro su after effect, la scheda Intel non è ha abbastanza memoria non so se sia possibile fare qualcosa, spero possiate aiutarmi, vi lascio delle info. 
      Sistema operativo Mac osx sierra 10.12.6 
      Modello laptop : Asus N551jx-cn043t
      Il resto è nella screen 
       
       

×