bilben1 Posted September 27, 2017 Share Posted September 27, 2017 I have a haswell g3258 cpu, msi h81i Mainboard, 8gb ram, sandisk 120 ssd, nvidia gtx760. Currently running sierra 10.12.6 successfully with the Pikeralpha bootstrap patch (10.12.6) and fakecpuid 0x0306A0. Changed config.plist for the HS 10.13 bootstrap patch as listed below to install released production version. I get kernel panic from applepowermangement. Does release version 10.13 require a new bootstrap patch other than the one listed below? 10.12~10.13 FakeCPUID 0x0306A0 cpuid_set_info_rdmsr © vit9696 b9a00100000f32 b9a001000031c0 10.12.x,10.13.x xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 83c3c483fb22 83c3c683fb22 10.12.5 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 8d43c483f822 8d43c683f822 10.12.6 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 89d804c43c22 89d804c63c22 10.13.x if you have skylake pentium xcpm_idle_wrmsr © Pike R. Alpha b9e20000000f30 b9e20000009090 10.12.x,10.13.x Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2502428 Share on other sites More sharing options...
maxb2000 Posted January 13, 2018 Share Posted January 13, 2018 Guys ! Good news ! As of latest Clover bootloader versions you no longer need to set a FakeCPUID and the kernel patches because Clover does that automatically in the background. The only thing you need to set is: <key>KernelXCPM</key> <true/> 1 Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2568610 Share on other sites More sharing options...
feli_solis Posted January 22, 2018 Share Posted January 22, 2018 Guys ! Good news ! As of latest Clover bootloader versions you no longer need to set a FakeCPUID and the kernel patches because Clover does that automatically in the background. The only thing you need to set is: <key>KernelXCPM</key> <true/> Cool! I want to try that. What version of clover are you using? Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2574230 Share on other sites More sharing options...
maxb2000 Posted January 24, 2018 Share Posted January 24, 2018 Cool! I want to try that. What version of clover are you using? I was using the latest one. https://sourceforge.net/projects/cloverefiboot/ Just make sure that you're using a clean config.plist because the one made with Clover seems too much for me at least. Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2575535 Share on other sites More sharing options...
nlou Posted September 30, 2018 Share Posted September 30, 2018 Still waiting for NVIDIA web drivers for Mojave. But I added the FakeCPUID 0x0306A0 for my G1840 in the config.plist otherwise Mojave would not boot. clover version: v2.4k_r4674 <key>KernelAndKextPatches</key> <dict> <key>AppleIntelCPUPM</key> <false/> <key>AppleRTC</key> <false/> <key>Debug</key> <false/> <key>DellSMBIOSPatch</key> <false/> <key>FakeCPUID</key> <string>0x0306A0</string> <key>KernelCpu</key> <false/> <key>KernelLapic</key> <false/> <key>KernelPm</key> <false/> <key>KernelXCPM</key> <false/> </dict> Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2637914 Share on other sites More sharing options...
nlou Posted September 30, 2018 Share Posted September 30, 2018 To check if there is no need for the fakeCPUid I will have a look at this too. <key>KernelXCPM</key> <true/> Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2637917 Share on other sites More sharing options...
macadventure Posted November 24, 2018 Share Posted November 24, 2018 On 1/22/2015 at 2:40 PM, nlou said: G3240,53,800,3100,3100,2,2 I have followed this guide and was successful in installing Sierra to PC after two weeks of searching this forum and the net. I have this cpu. Since this guide says to change it to your cpu, just to check, has any one done it on G3240? My system is up and running. I have issue with : proper resolution of monitor which may require nvidia driver for GeForce 710 1GB DDR3 card. Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2649549 Share on other sites More sharing options...
nlou Posted February 1, 2019 Share Posted February 1, 2019 @macadventure Not sure about Sierra but there was an security update for High Sierra, I installed the new drivers for my 750 Ti: macOS 10.13.6 High Sierra (17G5019) Nvidia driver version: 387.10.10.10.40.118 https://images.nvidia.com/mac/pkg/387/WebDriver-387.10.10.10.40.118.pkg Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2662251 Share on other sites More sharing options...
pico joe Posted April 14, 2019 Share Posted April 14, 2019 Mojave must use nullcpuxxx.kext .. for intel 3XXX Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2670154 Share on other sites More sharing options...
hardcorehenry Posted April 14, 2019 Share Posted April 14, 2019 (edited) 3 hours ago, pico joe said: Mojave must use nullcpuxxx.kext .. for intel 3XXX I don't have such kext and I'm using Mojave, so it's not necessary. Edited April 14, 2019 by hardcorehenry Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2670162 Share on other sites More sharing options...
pico joe Posted April 14, 2019 Share Posted April 14, 2019 5 hours ago, hardcorehenry said: I don't have such kext and I'm using Mojave, so it's not necessary. aah .. may i see your configuration cause I must nullcpu on mojave, in sierra can run without it Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2670177 Share on other sites More sharing options...
pico joe Posted April 14, 2019 Share Posted April 14, 2019 bro can you share cpufriend & cpufriendata provider .. I wanna look inside 2 kext that, those kext maybe the reason u can run without null anyway thanks Link to comment https://www.insanelymac.com/forum/topic/303755-how-to-intel-pentium-g3xxx-and-celeron-g1xxx-haswell-works-with-speedstep-yosemite-1010-and-mavericks-109/page/10/#findComment-2670193 Share on other sites More sharing options...
Recommended Posts