Jump to content
InsanelyMac Forum

bilben1

Members
  • Content count

    7
  • Joined

  • Last visited

About bilben1

  • Rank
    InsanelyMac Protégé
  1. I have a haswell g3258 cpu, msi h81i Mainboard, 8gb ram, sandisk 120 ssd, nvidia gtx760. Currently running sierra 10.12.6 successfully with fakecpuid 0x0306A0, piker alpha bootstrap patch (10.12.6) and vit9696 cupid_set_info listed below. System is using native xcpm power management. Changed clover config.plist,(kernel to patch section} for the HS 10.13 bootstrap patch listed below to install release production version HS. I get kernel panic mach _reboot attempt. I think its related applecpupowermanagement. Does Release version 10.13 require a new bootstrap patch other than the one listed below? config.plist attached 10.12~10.13 FakeCPUID 0x0306A0 cpuid_set_info_rdmsr © vit9696 b9a00100000f32 b9a001000031c0 10.12.x,10.13.x xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 83c3c483fb22 83c3c683fb22 10.12.5 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 8d43c483f822 8d43c683f822 10.12.6 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 89d804c43c22 89d804c63c22 10.13.x if you have skylake pentium xcpm_idle_wrmsr © Pike R. Alpha b9e20000000f30 b9e20000009090 10.12.x,10.13.x config.plist.zip
  2. I have a haswell g3258 cpu, msi h81i Mainboard, 8gb ram, sandisk 120 ssd, nvidia gtx760. Currently running sierra 10.12.6 successfully (xcpm power) with the Pikeralpha bootstrap patch (10.12.6) listed below and fakecpuid 0x0306A0. Changed config.plist for the HS 10.13 bootstrap patch as listed below to install released production version. I get kernel panic from applecpupowermangement immediatedly after reboot. Does release version 10.13 require a new bootstrap patch other than the one listed below? 10.12~10.13 FakeCPUID 0x0306A0 cpuid_set_info_rdmsr © vit9696 b9a00100000f32 b9a001000031c0 10.12.x,10.13.x xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 83c3c483fb22 83c3c683fb22 10.12.5 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 8d43c483f822 8d43c683f822 10.12.6 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 89d804c43c22 89d804c63c22 10.13.x if you have skylake pentium xcpm_idle_wrmsr © Pike R. Alpha b9e20000000f30 b9e20000009090 10.12.x,10.13.x
  3. I have a haswell g3258 cpu, msi h81i Mainboard, 8gb ram, sandisk 120 ssd, nvidia gtx760. Currently running sierra 10.12.6 successfully with the Pikeralpha bootstrap patch (10.12.6) and fakecpuid 0x0306A0. Changed config.plist for the HS 10.13 bootstrap patch as listed below to install released production version. I get kernel panic from applepowermangement. Does release version 10.13 require a new bootstrap patch other than the one listed below? 10.12~10.13 FakeCPUID 0x0306A0 cpuid_set_info_rdmsr © vit9696 b9a00100000f32 b9a001000031c0 10.12.x,10.13.x xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 83c3c483fb22 83c3c683fb22 10.12.5 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 8d43c483f822 8d43c683f822 10.12.6 xcpm_bootstrap - Ivy Bridge © Pike R. Alpha 89d804c43c22 89d804c63c22 10.13.x if you have skylake pentium xcpm_idle_wrmsr © Pike R. Alpha b9e20000000f30 b9e20000009090 10.12.x,10.13.x
  4. thank you, milesteg1, I had same problem as yours on a brand new install. Cause was a bad SMuuid. I filled your fix and also used MLB board script listed by hbp112358 and now iMessage works great.
  5. Thank you so much for this wonderful guide. It is great!! I have now successufully buit two build with MSI H81I mainboards, one uses an 13-4170 and the othe a pentium G3258 and they both work perfectly with Yos´mite 10.10.5. I have just updated both to El Capitan release version. The one issue that has come up is that the Renasas USB 3.0 does not work properly. It is eventually recognized but works very very slowly to a point where it cannot be used. I have also noticed that if I plug it into that port and try to boot it will kernel panic. Have you come across any solutions for this issue yet? Again thank you very much for preparring this guide.
  6. Very nice procedure. I have SL running but I am using voodoops2controller, No sidescroll feature. Is the applep2contoller in your package the one from Cybergreg that ebables sidescroll on the sentelic? If it is I will try new install using your procedure.
  7. bilben1

    [HowTo] Intel GMA 900 (for 915GM and 910)

    First I want to thank everyone for all the possible solutions. I have just recently begun toying with Mac Os installs and I admit I'm hooked. It really is a great operating system. It feels like super polished Linux to me. Anyway for the last few days I have been installing Jaz 10.4.8 on a Compaq Presario V4000 laptop with a 1.6gh Pentium M processor and the Intel 915GM chipset. The install went well and I used the SSE 2 kernel and it booted fine. Only problem is I got completely garbled video. So I basically did everything that was listed in the posts below. Attached paperclip to vga pin 5 and 12 and booted with safe mode without CE/QE of course. Tried Andy4life guide and you get blue screen with large blocks moving round, this is after the grey bootscreen. and there are no values in the kext that meet the info required. or AppleIntel830.kext, AppleIntelIntegratedGraphics.kext. Tried upgrade, tried installing 10.4.8 JaS without GMA915, still same no QE & CI. In the 10.4.6, there are no ref: to GMA950, just 915, and all works ok, so took out all ref: GMA950 from 10.4.8 and installed 915 from the working 10.4.6 still same no QE & CI. tried the diabolik patch and you get kernel panic, also tried 1. Do not install JaS.10.4.8.GMA.900.Support.pkg during maininstall of the OS 2. Install this from the installdisc after the main installation. Remove following files: * /System/Library/Extensions/AppleIntelGMA950.kext * /System/Library/Extensions/AppleIntelGMA950GA.plugin * /System/Library/Extensions/AppleIntelGMA950GLDriver.bundle * /System/Library/Extensions/AppleIntelGMA950VADriver.bundle Then do: CODE cd /System/Library/Extensions sudo chown -R root:wheel AppleIntel915.kext sudo chmod -R 755 AppleIntel915.kext sudo rm -rf /System/Library/Extensions.mkext sudo rm -rf /System/Library/Extensions.kextcache sudo diskutil repairpermissions / reboot get garbled video. Finally after reading 2 days of messing around I found a post here that said this was due to missing opengl.framework. So I followed the instuction below with the exception I used Paciist to install the packages instead of doing it manually in Terminal. Lo and behold everything works finally got CE/QE and all packages work like IWork and slow down in Quicktime. The instruction that worked are: After some playing about, I found a major issue. The gma900 installer in the installdisk Jas 10.4.8 does NOT install the OpenGL.framworks. You need to do this: Go to the jas.10.4.8.GMA900.support.pkg install file (on install dvd at /system/Intallation/packages), right click on it and goto show file contents. Go into Contents. There will be a archive.pax.gz (or similarily named). You need to unzip this file to your desktop. (double lick it and it will auto unzip to desktop). Goto terminal Do a sudo -s cd /Users/yourname/Desktop/Archive/Frameworks cp -r OpenGL.framework /System/Library/Frameworks/ cd /Users/yourmname/Desktop/Archive/Extensions cp -r AppleIntel* /System/Library/Extentions/ On both replace any files it wants to overwrite. cd /System/Library/Extensions chmod -R 755 AppleIntel* chown -R root:wheel AppleIntel* then open diskutil and do a repair permissions. This should repair the OpenGL.framework. After all that is done, DELETE any AppleIntelGMA files, and the AppleIntelIntegrated anything. Reboot... whala! Also my hard drive did have the opengl.frameworks files but I replaced them with the packages from the Jaz 10.4.8 disk. Did not need to modify the kexts any further. PS upgraded to 10.4.11 everything works with some occasional sound stutter. Now only have some audio stutter issues to deal with.
×