Pavo Posted January 18, 2015 Author Share Posted January 18, 2015 what you added both Bios Gigabyte GA-B75M-D3H board? I put EnhancedFat, PartitionDxe, Hfs+, Ozmosis, SmcEmulator 1 Non-initializing the hd OS X when I was selecting the BIOS HD referring to OS X, always came back to the Windows HD and initializing the same. I don't rely on the BIOS section to set boot order, use the Startup Disk option in OS X, whatever the last booted OS was that is what it will boot again unless you use the F12 boot menu option. 2-I install plugins in S / L / E: GPUSensors, ACPISensors, LPCSensors etc. And all bare kernel panic because FakeSMC vesão was different from the current version of the plugins. What version of FakeSMC present in the BIOS? SmcEmulator is the fakesmc from the Quo firmware these sensor will not work with it, you will have to take smcemulator out of your firmware and use fakesmc with the sensors inside your ESP instead. 3-I have my DSDT with corrections for my USB 3.0 ports, but when plugged in a USB HDD or pendrive, my reicializava system and I reported in error. I was also trying to boot the system with these devices plugged and gave kernel panic, impossible to use the devices to the USB ports, up to 2.0 sometimes gave kernel panic. This is the "GenericUSBXHCI.kext" in the BIOS, if I have problems because as I said, my DSDT has the patch for it. I don't know anything about your dsdt edits and I never put kext inside firmware unless someone specifically ask me to, seems like your issue is wrong edits in your dsdt and maybe bad GenericUSBXHCI.kext, you could also try disabling the XHCI in the bios. 4-VoodooHDA is also inserted into the BIOS? I use the method "Audio On-The-Fly" along with the kext "DummyHDA" with injection by CloverEFI. In fact the CloverEFI also injects the correct ports and active video kext "AMD7000Controller". How do if they do not work. This method works in audio Ozmosis? Again I don't add any kext inside firmware unless someone specifically ask me to, don't know what to tell you here 5-What SMBIOS defined? I use "iMac 13.1". I normally put what SMBIOS that matches the chipset and in your case the iMac13,1 is a match, you should be able to know how to find out what SMBIOS you are using. 6-NVRAM is unlocked? I saw that the BIOS version "F15" is not unlocked the NVRAM. So I have some problems with Ozmosis. I haven't ran into any nvram issue with any firmware I have made. 2 Link to comment Share on other sites More sharing options...
WinstonAce Posted January 18, 2015 Share Posted January 18, 2015 Do you use VHDA and smcemulator from quo 1479 bios? Link to comment Share on other sites More sharing options...
crusher Posted January 18, 2015 Share Posted January 18, 2015 I install FakeSMC and now work sensors. Link to comment Share on other sites More sharing options...
Pavo Posted January 18, 2015 Author Share Posted January 18, 2015 Do you use VHDA and smcemulator from quo 1479 bios? I use smcemulator as a standard fakesmc for all users but only use VHDA if a users ask for it Link to comment Share on other sites More sharing options...
crusher Posted January 19, 2015 Share Posted January 19, 2015 wide logo I set in my bios windows 8 and CSM disable but does not work for me. Do you have another idea? And how to enable my second graphic Intel HD4600. Thand in advanced. EDIT: My Intel HD4600 turn off in bios. My Like this http://www.insanelymac.com/forum/topic/291655-ozmosis/?p=2077255 Link to comment Share on other sites More sharing options...
Pavo Posted January 19, 2015 Author Share Posted January 19, 2015 I set in my bios windows 8 and CSM disable but does not work for me. Do you have another idea? And how to enable my second graphic Intel HD4600. Thand in advanced. EDIT: My Intel HD4600 turn off in bios. My Defaults.plist.zip Like this http://www.insanelymac.com/forum/topic/291655-ozmosis/?p=2077255 never seen wide logo before so I'm not sure, your Defaults.plist has the correct ig-platform for your HD4600 you must have the IGPU set as primary in your bios settings for Oz to inject it Link to comment Share on other sites More sharing options...
crusher Posted January 19, 2015 Share Posted January 19, 2015 never seen wide logo before so I'm not sure, your Defaults.plist has the correct ig-platform for your HD4600 you must have the IGPU set as primary in your bios settings for Oz to inject it Bad picture but like this: Link to comment Share on other sites More sharing options...
MisterTizi Posted January 19, 2015 Share Posted January 19, 2015 Thanks for the modded bios repository ! I updated the bios of my Gigabit GA-Z97MX Gaming 5 successfully, i use the native graphic board HD4600 from the mother board and during the installation of Yosemite, the screen (with 1920x1080 resolution) detect a 1600x1200 resolution and rescale the screen, so the apple logo is small. At the end of the installation the screen is rescaled and very laggy. The information returned by OsX show HD4600 and 7Mb of video memory. Have you some idea to fix the problem ? Link to comment Share on other sites More sharing options...
Pavo Posted January 19, 2015 Author Share Posted January 19, 2015 Bad picture but like this: 2015-01-19 20.04.24.jpg Looks fine to me Thanks for the modded bios repository ! I updated the bios of my Gigabit GA-Z97MX Gaming 5 successfully, i use the native graphic board HD4600 from the mother board and during the installation of Yosemite, the screen (with 1920x1080 resolution) detect a 1600x1200 resolution and rescale the screen, so the apple logo is small. At the end of the installation the screen is rescaled and very laggy. The information returned by OsX show HD4600 and 7Mb of video memory. Have you some idea to fix the problem ? You need to add ig-platform to a Defaults.plist, if you used a already made firmware in the repo then maybe the Defaults.plist that is in the firmware doesn't have it, you can make a Defaults.plist using the values from Clover config and then put the Defaults.plist into Efi\Oz folder and reboot and reset nvram using the key combo Windows Key+Alt+P+R Defaults.plist.zip Link to comment Share on other sites More sharing options...
vuhothang Posted January 21, 2015 Share Posted January 21, 2015 Thanks pavo Link to comment Share on other sites More sharing options...
aziiz3 Posted February 1, 2015 Share Posted February 1, 2015 Hey Pavo, Do Oz could work on my GA-b75-HD3 Motherboard ? GA-B75-HD3 and if it's works, would you mind make it one for me ? Thanks in advance Link to comment Share on other sites More sharing options...
crusher Posted February 5, 2015 Share Posted February 5, 2015 @Pavo look and tell me what you think. I sent you one folder in PM. Link to comment Share on other sites More sharing options...
Aigors Posted February 13, 2015 Share Posted February 13, 2015 Hi Pavo, First of all thank you for your works, on question, do your bios contains DSDT pre maded? Regarding Asus mobo, the only way is to use AFUDOS from usb stick because the original bios from website it's' capsule file, if you flash this with spi programmer it's not enough because for what i understand, the asus processe of flashing use CAP information to flash uuid mac-address and others informations that are unique for any mobo, so via ftk you can save these informations to apply to new dowwnloaded bios, in any case it's a' tricky process can potentialy brick mobo. Link to comment Share on other sites More sharing options...
jacoweb Posted February 20, 2015 Share Posted February 20, 2015 Hello! hackers! Maybe someone here know if there is some working x79 systems with ozmosis? I have added ozmosis 1479 to my bios, working great but some issues then.. 1: Only shows 4 ram slots, when i have 8, so the memory is wrong. 2: After playing arround with the system for some hours, maybe do a reboot, the system is stuck with the Asus screen. Need to reflash the bios to get it up again. I have read that there is a problem with modifyed bioses on Asus boards? Thanks! Link to comment Share on other sites More sharing options...
bobk Posted March 19, 2015 Share Posted March 19, 2015 Thanks for all your work -Ozmosis boots really fast on Vanilla Yosemite -- installed network card kext s Have a working ASRock H77M with I7-3770S -8 GB Mem --Vanilla install on a 120mb Samsung 840 SSD. Haven't tested sound with the exception of HDMI audio on Intel 4000 -- unsure how to enable HDMI audio on the Built in Intel 4000 is it possible by a bios mod to enable HDMI audio -- thanks Robert did a vanilla install of Maverics and enable network card using a kext.. --hdmi audio is working without any intervention. only one issue App store - unsupported device ..... error prevents login. Can I do anything with nvram Link to comment Share on other sites More sharing options...
tec-eng Posted March 30, 2015 Share Posted March 30, 2015 Hi Pavo, I need the Ozmosis modified BIOS for GA-Z97M-D3H, could you help me please? Tanks, Link to comment Share on other sites More sharing options...
Pavo Posted March 30, 2015 Author Share Posted March 30, 2015 Hi Pavo, I need the Ozmosis modified BIOS for GA-Z97M-D3H, could you help me please? Tanks, https://drive.google.com/open?id=0Bzy05-VIsW3LfnZOY19OWmZHZTQ3NDNDNlB1eW5TWGlOR1Z4V2hNOXVNRm5rejYwUXhtdk0&authuser=0 Link to comment Share on other sites More sharing options...
tec-eng Posted March 30, 2015 Share Posted March 30, 2015 https://drive.google.com/open?id=0Bzy05-VIsW3LfnZOY19OWmZHZTQ3NDNDNlB1eW5TWGlOR1Z4V2hNOXVNRm5rejYwUXhtdk0&authuser=0 Thank you very much! Link to comment Share on other sites More sharing options...
tec-eng Posted March 31, 2015 Share Posted March 31, 2015 Thank you very much! Pavo, Inside this Ozmosis Mod BIOS have been added patches and kexts or only Ozmosis bootloaders? One more time thank you! Link to comment Share on other sites More sharing options...
crusher Posted March 31, 2015 Share Posted March 31, 2015 Pavo, Inside this Ozmosis Mod BIOS have been added patches and kexts or only Ozmosis bootloaders? One more time thank you! This files you have in your rom!!! |200|CORE_DXE |5AE3F37E-4EAE-41AE-8240-35465B5E81EB|00770C09|037944|DXEC| |201|PartitionDxe |1FA1F39E-FEFF-4AAE-BD7B-38A070A3B609|007A854D|0018C2|DRVR| |202|HfsPlus |4CF484CD-135F-4FDC-BAFB-1AA104B48D36|007A9E0F|003712|DRVR| |203|EnhancedFat |961578FE-B6B7-44C3-AF35-6BC705CD2B1F|007AD521|00343A|DRVR| |204|Ozmosis |AAE65279-0761-41D1-BA13-4A3C1383603F|007B095B|02FCE7|DRVR| |205|HermitShellX64 |C57AD6B7-0515-40A8-9D21-551652854E37|007E0642|04171F|APPN| |206|SmcEmulatorKext|DADE1001-1B31-4FE4-8557-26FCEFC78275|00821D61|01146F|FRFM| |207|OzmosisDefaults|99F2839C-57C3-411E-ABC3-ADE5267D960D|008331D0|0005D8|DRVR| 1 Link to comment Share on other sites More sharing options...
crusher Posted March 31, 2015 Share Posted March 31, 2015 Pavo, Inside this Ozmosis Mod BIOS have been added patches and kexts or only Ozmosis bootloaders? One more time thank you! O I create Oz for your mobo and I put next ffs files: |191|PartitionDxe |1FA1F39E-FEFF-4AAE-BD7B-38A070A3B609|008B11C0|0018CC|DRVR| |192|HfsPlus |4CF484CD-135F-4FDC-BAFB-1AA104B48D36|008B2A8C|00379C|DRVR| |193|EnhancedFat |961578FE-B6B7-44C3-AF35-6BC705CD2B1F|008B6228|003451|DRVR| |194|OzmosisDefaults|99F2839C-57C3-411E-ABC3-ADE5267D960D|008B9679|0002BE|FRFM| |195|Ozmosis |AAE65279-0761-41D1-BA13-4A3C1383603F|008B9937|030B56|DRVR| |196|OzmosisBlackThe|AC255206-DCF9-4837-8353-72BBBC0AC849|008EA48D|02F692|FRFM| |197|SmcEmulatorKext|DADE1001-1B31-4FE4-8557-26FCEFC78275|00919B1F|0133A3|FRFM| |198|DisablerKext |DADE1002-1B31-4FE4-8557-26FCEFC78275|0092CEC2|00323B|FRFM| |199|InjectorKext |DADE1003-1B31-4FE4-8557-26FCEFC78275|009300FD|00023F|FRFM| |200|CpuSensorsKext |DADE1006-1B31-4FE4-8557-26FCEFC78275|0093033C|0078D7|FRFM| |201|LpcSensorsKext |DADE1007-1B31-4FE4-8557-26FCEFC78275|00937C13|00EC10|FRFM| |202|GpuSensorsKext |DADE1008-1B31-4FE4-8557-26FCEFC78275|00946823|01A285|FRFM| |203|VoodooHdaKext |DADE1009-1B31-4FE4-8557-26FCEFC78275|00960AA8|027367|FRFM| I attach your bios rom. Good luck!!!! 1 Link to comment Share on other sites More sharing options...
tec-eng Posted March 31, 2015 Share Posted March 31, 2015 O I create Oz for your mobo and I put next ffs files: |191|PartitionDxe |1FA1F39E-FEFF-4AAE-BD7B-38A070A3B609|008B11C0|0018CC|DRVR| |192|HfsPlus |4CF484CD-135F-4FDC-BAFB-1AA104B48D36|008B2A8C|00379C|DRVR| |193|EnhancedFat |961578FE-B6B7-44C3-AF35-6BC705CD2B1F|008B6228|003451|DRVR| |194|OzmosisDefaults|99F2839C-57C3-411E-ABC3-ADE5267D960D|008B9679|0002BE|FRFM| |195|Ozmosis |AAE65279-0761-41D1-BA13-4A3C1383603F|008B9937|030B56|DRVR| |196|OzmosisBlackThe|AC255206-DCF9-4837-8353-72BBBC0AC849|008EA48D|02F692|FRFM| |197|SmcEmulatorKext|DADE1001-1B31-4FE4-8557-26FCEFC78275|00919B1F|0133A3|FRFM| |198|DisablerKext |DADE1002-1B31-4FE4-8557-26FCEFC78275|0092CEC2|00323B|FRFM| |199|InjectorKext |DADE1003-1B31-4FE4-8557-26FCEFC78275|009300FD|00023F|FRFM| |200|CpuSensorsKext |DADE1006-1B31-4FE4-8557-26FCEFC78275|0093033C|0078D7|FRFM| |201|LpcSensorsKext |DADE1007-1B31-4FE4-8557-26FCEFC78275|00937C13|00EC10|FRFM| |202|GpuSensorsKext |DADE1008-1B31-4FE4-8557-26FCEFC78275|00946823|01A285|FRFM| |203|VoodooHdaKext |DADE1009-1B31-4FE4-8557-26FCEFC78275|00960AA8|027367|FRFM| I attach your bios rom. Good luck!!!! mb_bios_ga-z97m-d3h_f6.zip Crushers, Thank you very much! Link to comment Share on other sites More sharing options...
crusher Posted April 1, 2015 Share Posted April 1, 2015 Crushers, Thank you very much! You're welcome!!!! 1 Link to comment Share on other sites More sharing options...
davidm71 Posted April 5, 2015 Share Posted April 5, 2015 Hi, I am about to try to install Ozmosis into my GA-Z87X-UD5h with the 1479 branch and wondering if Oz is compatible with Intel raid and if a modded appleahciport kext can be converted to ffs such that osx sees the Intel Raid Volume or at least allows you to boot with raid enabled in bios? Also I tried to convert my own modded kext into ffs using kext2ffs but mmtool complains that the GUID is taken already. So I was also wondering if its possible to change the GUID of an ffs file? Thanks a million! Link to comment Share on other sites More sharing options...
Pavo Posted April 6, 2015 Author Share Posted April 6, 2015 RAID is not supported, and you have to use ozmosistool to generate GUIDs Link to comment Share on other sites More sharing options...
Recommended Posts