Jump to content
Sign in to follow this  
NewFolder

ML 10.8.3 Graphical Corruption on Bootup of New Install

1 post in this topic

Recommended Posts

My system-

board: Asus P8Z77-V LK (with 1001 BIOS which I patched for sleep ability)

gfx: Ati Radeon HD5670, connected to 2560x1440 display via dual link DVI-D

cpu: i7 3770K

SATA: Win7 hd, Win8 hd, Mac OS X hd (in progress), DVD read\write

 

Hello. I'm a newb to Hackintosh installs and am trying to get Mountain Lion 10.8.3 running. For installation, I used iAtkos ML3U and it went very smoothly.. but I haven't been able to boot up from the harddrive. At the time that it fails, I see some graphical corruption which I think is unusual (though I could be wrong). I have attached the image to the post.

 

For attempted launches, I use the Clover bootloader (which I believe I have as a result of having used iAtkos ML3U - though I don't know how common it is to have it for other reasons because I'm newb). For boot flags, I typically accept the two default flags (which I believe are "npci=0x2000 slide=0") and I add "-f -v" (the "-f" because I think it prevents cached {censored} from {censored} up my tests, and -v to hopefully get a hint why it failed)... and then I variously try other flags and toggling things in the Clover bootloader somewhat randomly. The flags have never helped me get further, but have sometimes caused me to get less far (for instance, it's interesting that "-x" for safe mode causes the boot to fail with a reboot almost immediately).

 

So, my theories at the moment are that perhaps some of my problem is graphics related due to the graphical corruption.. and perhaps I've got some problem related to the hibernated drive which is usually the last thing mentioned in the boot sequence before failure (I doubt it's the reason because I see it as no reason for boot failure, though it is the last thing mentioned). I'm aware that the hibernated drive is probably somehow due to Win8's attempt at fast boots, though I disabled fast boots over a week ago and have shutdown Win8 many times since (and it's still marked as hibernated). My best theory however is that my real problem is something different which I haven't considered.

 

I have occasionally removed my Ati Radeon HD5670 card and instead attempted booting up using my onboard Intel graphics. It generally fails at the same location, though I don't see the graphical corruption. I have re-installed using iAtkos ML3U several times and each time selected different Customization options.. and I haven't had any success with my last couple configurations. Though with an earlier install, I did at one point manage to boot up with the Intel gfx, but couldn't proceed because I only had a PS/2 keyboard and Mac OS X doesn't support it.. I now always select the PS/2 support customization at the time of install.

 

Anyway, any suggestions would be appreciated. I'd also be curious why my iAtkos ML3U usb drive only lets me install once, and always fails subsequent installs.. which has necessitated me re-writing it over and over again each time I want to try different customizations in my install.

 

thanks

post-1157058-0-04887800-1366772267_thumb.jpg

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By zcmckenna
      I have been having a pretty major issue with my new Hackintosh lately. It has been displaying broken link images in safari (See image 1). It has also had certain areas of artifacting such as the storyboard in Xcode (See image 2). and finally PDFs have been showing up completely blacked out (See image 3). This has been a big issue for me and I was wondering if any of you have had the same problem and have had any luck fixing it. I have already tried display calibration and switching to integrated graphics. Thanks in advance!
      (See attached for config.plist)
      Specs:
      CPU: i5-8600k
      MB: Gigabyte Z370XP SLI
      GPU: ASUS 1070 Dual
      RAM: 16GB Ballistix (8GB x 2)
      HDD: WD Blue 1TB



      config.plist
    • By partha.slg123
      Hackintosh High Sierra 10.13.3 USB Installer Boot Into USB DIrectly Enter Exit Option Menu. Clover Boot Menu Not Showing. Plz Help .................
       

       
      My System Specification :

      CPU : Core i5 6400
      MB : Asus H110M-CS
      RAM : 8GB DDR 4
      HDD : WD 1TB For Windows And WD 500 GB For Hackintosh
      Bootloader : Clover
    • By dark_hacker
      I have a samsung NP530U3C extract DSDT by clover and made the edit following the guide https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/ I also did following this guide https: // www. tonymacx86.com/threads/fixing-brightness-with-custom-edid.219413/ the fix of my EDID and followed the guide to put the brightness to work https://www.tonymacx86.com/threads/guide-laptop-backlight -control-using-applebacklightinjector-kext.218222 / I have the brightness to work but I have a problem in the screen I leave the image to see the problem.
      Clover + IOREG + kextcache -i
      https://ufile.io/z61kh

    • By dark_hacker
      I have a samsung NP530U3C extract DSDT by clover and made the edit following the guide https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/ I also did following this guide https: // www. tonymacx86.com/threads/fixing-brightness-with-custom-edid.219413/ the fix of my EDID and followed the guide to put the brightness to work https://www.tonymacx86.com/threads/guide-laptop-backlight -control-using-applebacklightinjector-kext.218222 / I have the brightness to work but I have a problem in the screen I leave the image to see the problem.
       
      Clover + IOREG + kextcache -i
       
      https://ufile.io/z61kh
       

×