Slice Posted January 18, 2024 Share Posted January 18, 2024 12 hours ago, mariosun said: spent some time with Jief to understand a problem to solve i have to put this: With 0x0F01 i see correct CPU name using RestrictEvents kext or Intel Xeon without using that kext Is it documented in your WIKI? Thank you It is the question to RestrictEvents.kext if it set CPU name depending on CPU type. If we speak about OS without RestrictEvents then CPU type must be one present in real MACs and than you'll see CPU name as in the real MAC. No matter of you real CPU. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815612 Share on other sites More sharing options...
fabiosun Posted January 18, 2024 Share Posted January 18, 2024 (edited) 1 hour ago, Slice said: It is the question to RestrictEvents.kext if it set CPU name depending on CPU type. If we speak about OS without RestrictEvents then CPU type must be one present in real MACs and than you'll see CPU name as in the real MAC. No matter of you real CPU. Yes i think we are saying the same thing In my case without RestrictEvents.kext and processor type set to 0 About my Mac has Xeon 16 Cores as CPU and this is the same with Clover Bootloader using Type set to 0x0F01 For both bootloaders with RestrictEvents.kext about my mac has AMD Ryzen 9 7950X 16-Core Processor common "problem" for both bootloaders is the frequency posted in About My Mac (4.3 Ghz) It should be 4.5 Ghz OSX put the remain part here: And this should be a common OSX problem for both AMD and Intel platform Have you any experience in this? (For cpu with frequency greater than 4.3 GHz I mean) Edited January 18, 2024 by mariosun 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815614 Share on other sites More sharing options...
Slice Posted January 18, 2024 Share Posted January 18, 2024 If the value 4.3GHz came from CPUID BrandString that I can do nothing. It is ROM. But for System Profilier I can set own value CPU->FrequencyMHz=4500 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815625 Share on other sites More sharing options...
Marcinho Posted January 18, 2024 Share Posted January 18, 2024 Hello everyone, I would like to know if anyone else is having problems with booting in version 5157. For me, since commit 00466c6 "reduce clover size" of version 5156 I have early boot hang on my z390 setup. Sorry for my English and I appreciate any help. thanks Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815639 Share on other sites More sharing options...
miliuco Posted January 18, 2024 Share Posted January 18, 2024 @Marcinho No issue here. 5157 boots fine my Z390. Please add a signature to your user profile, so your specs are always visible in the posts. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815640 Share on other sites More sharing options...
fabiosun Posted January 18, 2024 Share Posted January 18, 2024 6 hours ago, Slice said: CPU->FrequencyMHz=4500 using this my system hangs i think apple support CPU frequency till 4.3Ghz it is weird that system sees missing 205 Mhz in detailed system report 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815641 Share on other sites More sharing options...
Stefanalmare Posted January 18, 2024 Share Posted January 18, 2024 18 minutes ago, miliuco said: @Marcinho No issue here. 5157 boots fine my Z390. Please add a signature to your user profile, so your specs are always visible in the posts. Hey man! Please give me your z390 clover EFI. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815642 Share on other sites More sharing options...
MakAsrock Posted January 18, 2024 Share Posted January 18, 2024 (edited) 1 hour ago, Marcinho said: Hello everyone, I would like to know if anyone else is having problems with booting in version 5157. For me, since commit 00466c6 "reduce clover size" of version 5156 I have early boot hang on my z390 setup. Sorry for my English and I appreciate any help. thanks Except that the Ta-da sound stopped playing. When I started the my hack, I didn't notice any significant problems. There is still a comical error with the display of the order of memory dims. And so, everything works fine. Edited January 18, 2024 by MakAsus Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815643 Share on other sites More sharing options...
miliuco Posted January 18, 2024 Share Posted January 18, 2024 @Stefanalmare Here it is, amigo. But it's set for the Fenvi on Sonoma, if it is not your case deselect BlockSkywalk and move AMFIPass.kext, IO80211FamilyLegacy.kext and IOSkywalkFamily.kext from 14 to Off. Clover-5157.zip 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815644 Share on other sites More sharing options...
spakk Posted January 18, 2024 Share Posted January 18, 2024 3 hours ago, Stefanalmare said: Hey man! Please give me your z390 clover EFI. He has linked his EFI folder, etc., on his GitHub page. You can download and use everything from there. look here: https://github.com/perez987 3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815647 Share on other sites More sharing options...
miliuco Posted January 18, 2024 Share Posted January 18, 2024 @spakk My GitHub only has OC EFIs, not Clover. This is Clover 5157 for @Stefanalmare 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815650 Share on other sites More sharing options...
cankiulascmnfye Posted January 19, 2024 Share Posted January 19, 2024 Newer Clover affects Windows 11 Touchpads: https://github.com/CloverHackyColor/CloverBootloader/issues/664 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815654 Share on other sites More sharing options...
Slice Posted January 19, 2024 Share Posted January 19, 2024 5 hours ago, cankiulascmnfye said: Newer Clover affects Windows 11 Touchpads: https://github.com/CloverHackyColor/CloverBootloader/issues/664 I was avoiding any influence of Clover on Windows. Exceptions: 1. Legacy computer boots Windows in legacy mode while Clover allows EFI-boot. It is the difference for Windows. 2. RadeonDeInit influences on Radeon card on hardware level. 3. HaltEnable works on hardware level. 4. USB->FixOwnership works on Hardware level. What else? You may switch on/off these setting to be sure if they influences on Windows. 1 1 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815661 Share on other sites More sharing options...
jackacc Posted January 19, 2024 Share Posted January 19, 2024 On 1/18/2024 at 4:16 AM, cankiulascmnfye said: Workaround for Clover: use boot-args: -no_compat_check and revpatch=sbvmm and add RestrictEvents.kext. The first one skips the board-id check, the 2nd one re-enables updates. My idea is to use the OCLP patch conversion clover, which not only bypasses the ID, but also USB1.1 network card, etc. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815665 Share on other sites More sharing options...
MakAsrock Posted January 19, 2024 Share Posted January 19, 2024 (edited) Slice The starting sound (Ta-Da) disappeared in Clover r5157 https://github.com/CloverHackyColor/CloverBootloader/issues/666#issue-2088862058 In the Clover-5156 version the starting sound is working. Only the BlockSkywalk quirk is not working. Shabbat Shalom! Edited January 19, 2024 by MakAsus 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815668 Share on other sites More sharing options...
fabiosun Posted January 19, 2024 Share Posted January 19, 2024 (edited) @MakAsus does it happen to your second rig (z690)? internal realtek audio is USB audio? (asrock has no USB audio) Edited January 19, 2024 by mariosun 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815669 Share on other sites More sharing options...
MakAsrock Posted January 19, 2024 Share Posted January 19, 2024 (edited) 48 minutes ago, mariosun said: @MakAsus does it happen to your second rig (z690)? internal realtek audio is USB audio? (asrock has no USB audio) I mean my profile hack (z690), not the MacBook. The speakers are connected to the green line output (3 1/4 inch jack). But Jief_Machak seems to have already found the reason. Further tests will be carried out after Shabbat. Edited January 19, 2024 by MakAsus Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815670 Share on other sites More sharing options...
Slice Posted January 19, 2024 Share Posted January 19, 2024 On 1/18/2024 at 10:19 PM, MakAsus said: Except that the Ta-da sound stopped playing. When I started the my hack, I didn't notice any significant problems. There is still a comical error with the display of the order of memory dims. And so, everything works fine. Now ta-da works. Don't forget to set Volume 0060. Default value is zero. 1 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815682 Share on other sites More sharing options...
cankiulascmnfye Posted January 19, 2024 Share Posted January 19, 2024 9 hours ago, Slice said: I was avoiding any influence of Clover on Windows. Exceptions: 1. Legacy computer boots Windows in legacy mode while Clover allows EFI-boot. It is the difference for Windows. 2. RadeonDeInit influences on Radeon card on hardware level. 3. HaltEnable works on hardware level. 4. USB->FixOwnership works on Hardware level. What else? You may switch on/off these setting to be sure if they influences on Windows. Commendable issue handling (as always). Of course, TouchPad not working in Windows on a modern Laptop when using Clover must definitely be a user errror. Absolutely nothing wrong with Clover… 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815684 Share on other sites More sharing options...
MakAsrock Posted January 19, 2024 Share Posted January 19, 2024 (edited) 1 hour ago, Slice said: Now ta-da works. Don't forget to set Volume 0060. Default value is zero. Everything works fine. Thank you! It remains to solve the problem of displaying the order of dims and Clover will regain the name of the best bootloader, which it always was before. https://github.com/CloverHackyColor/CloverBootloader/issues/660#issue-2072447025 🙂 Edited January 19, 2024 by MakAsus Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815685 Share on other sites More sharing options...
MakAsrock Posted January 19, 2024 Share Posted January 19, 2024 (edited) On 1/19/2024 at 11:05 PM, cankiulascmnfye said: Commendable issue handling (as always). Of course, TouchPad not working in Windows on a modern Laptop when using Clover must definitely be a user errror. Absolutely nothing wrong with Clover… The best bootloader for Windows is bootmgfw.efi in combination with the BIOS boot menu selection key (For me it is the F11 key). I don’t use others at all. OpenCore has a much stronger affects on Windows than Clover. Booting Windows from Clover does not work, because the Windows bootloader is located in the EFI on another disk and hidden: Windows, windows, Microsoft, NO NAME, Unknown. I have a rule: Don't turn it on until obviously need it. BIOS setup: Default. And with these settings: 1. RadeonDeInit -> off. 2. ACPI -> HaltEnable -> off. 3. Boot -> Arguments -> darkwake=0 revcpu=1 cpuname,sbvmm -ctrsmt -wegnoigpu -shikioff 4. CPU -> Type -> 0x0F01 5. Audio -> AFGLowPowerState -> on 6. Audio -> ResetHDA -> on 7. USB -> AddClockID -> off. 8. USB -> FixOwnership -> off. 9. USB -> HighCurrent -> off. 10. USB -> Inject -> off. 11. KernelAndKextPatches -> BlockSkywalk -> on 12. RtVariables -> CsrActiveConfig -> 0x0803 All mac os futures are working including DRM playback and sleep/wake S3, except FileVault2. It is not working in Sonoma with the OCLP patch! Edited January 22, 2024 by MakAsus 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815686 Share on other sites More sharing options...
MakAsrock Posted January 21, 2024 Share Posted January 21, 2024 (edited) I have a suggestion to the developers: It would be nice to move CsrActiveConfig from RtVariables to SMBIOS. To use different values for different MacOS If possible (I would like to have SIP enabled in Ventura and disabled in Sonoma). Edited January 21, 2024 by MakAsus Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815722 Share on other sites More sharing options...
fabiosun Posted January 21, 2024 Share Posted January 21, 2024 (edited) you can do with two different config.plist Problem is you may have need to clean nvram value when you change OS (this also if the parameter would be in SMBios) Edited January 21, 2024 by mariosun 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815723 Share on other sites More sharing options...
MakAsrock Posted January 21, 2024 Share Posted January 21, 2024 (edited) 3 hours ago, mariosun said: you can do with two different config.plist Problem is you may have need to clean nvram value when you change OS (this also if the parameter would be in SMBios) How can I make the configs switch themselves depending on the OS? In case I use SMBIOS_ventura and general SMBIOS with the same value CsrActiveConfig = 0x0000, I can replace it with 0x0803 before the patch only in general SMBIOS. BlockSkywalk already OS dependent. Now the value CsrActiveConfig = 0x0803 is interferes me in Ventura. Edited January 21, 2024 by MakAsus Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815730 Share on other sites More sharing options...
tluck Posted January 22, 2024 Share Posted January 22, 2024 recently tried to the lasted 5157 from v5156 but the changes after commit "Changes in OC" 5817644aa00228c74dbf873a43e6cff7e49ca288 (5817644) break Clover for me. I get 1) unsupported graphics -> black screen 2) also no kexts were injected from the ESP. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/1184/#findComment-2815737 Share on other sites More sharing options...
Recommended Posts