Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30960 posts in this topic

Recommended Posts

jlrycm
jlrycm
Posted
Posted
29 minutes ago, iCanaro said:

@jlrycm from ioreg I see that SSDT does its job and for USB you're good to go
about PXSX actually has no outputs, but it's strange asmedia is native on macOS, try making a boot attempt without DSDT

@iCanaro, I booted without DSDT. Still PXSX is not reflecting outputs (see attached ioreg).

Jorge’s iMac booted without DSDT.zip

  • Sad 1
jlrycm
jlrycm
Posted
Posted
13 minutes ago, jlrycm said:

@iCanaro, I booted without DSDT. Still PXSX is not reflecting outputs (see attached ioreg).

Jorge’s iMac booted without DSDT.zip

@iCanaro

 
update: as I mentioned earlier, Apple changed the AppleUSBXHCIPCI included in the IOUSBHOSTFAMILY kext (the iokitpersonalities are different and in Big Sur the iokit personality that is reported in the system profiler is AppleASMediaUSBXHCI, while in Catalina where the USB 3.1 was working the iokitpersonality reportes in system profiler is AppleUSBXHCIPCI). I suspect this change is breaking native support of my USB 3.1 card.
naiclub
naiclub
Posted
Posted (edited)
17 minutes ago, jlrycm said:

@iCanaro, I booted without DSDT. Still PXSX is not reflecting outputs (see attached ioreg).

Jorge’s iMac booted without DSDT.zip

Can you try changing SMbios to something other than imac15.1, for example imacpro1.1?

Edited by naiclub
jlrycm
jlrycm
Posted
Posted (edited)
1 hour ago, naiclub said:

Can you try changing SMbios to something other than imac15.1, for example imacpro1.1?

@naiclub, I followed your suggestion and it did not work, the PXSX is not reporting outputs and the USB 3.1 is not loaded properly. I’m more and more convinced that if I figured out how to deal with the change in the AppleUSBXHCIPCI plug-in with respect to ASmedia, I may find the solution. The info.plist of such plug-in in Big Sur is attached for reference. The PCIE USB 3.1 card I have installed is based on ASMedia2142 controller and was natively supported in Catalina.

Info.plist

Edited by jlrycm
Matgen84
Matgen84
Posted
Posted (edited)
36 minutes ago, mifjpn said:

Long names related to Voodoo seem to need attention.
I will tell the story of Jief to Japan.

Thank you,

 

Hi @mifjpn With the last commit, number of characters is 256 instead of 127. Maybe some plugin's kexts load correctly now.

 

 

34 minutes ago, jlrycm said:

@naiclub, I followed your suggestion and it did not work, the PXSX is not reporting outputs and the USB 3.1 is not loaded properly. I’m more and more convinced that if I figured out how to deal with the change in the AppleUSBXHCIPCI plug-in with respect to ASmedia, I may find the solution. The info.plist of such plug-in in Big Sur is attached for reference. The PCIE USB 3.1 card I have installed is based on ASMedia2142 controller and was natively supported in Catalina.

Info.plist


Hi

I can't upload your Info.plist file :cry:

Edited by Matgen84
naiclub
naiclub
Posted
Posted
36 minutes ago, jlrycm said:

@naiclub, I followed your suggestion and it did not work, the PXSX is not reporting outputs and the USB 3.1 is not loaded properly. I’m more and more convinced that if I figured out how to deal with the change in the AppleUSBXHCIPCI plug-in with respect to ASmedia, I may find the solution. The info.plist of such plug-in in Big Sur is attached for reference. The PCIE USB 3.1 card I have installed is based on ASMedia2142 controller and was natively supported in Catalina.

Info.plist

Hmm..must have to add the code value to DSDT like this 

Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If ((Arg2 == Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                             // .
                    })
                }

                Return (Package (0x1A)
                {
                    "AAPL,slot-name", 
                    "Built In", 
                    "name", 
                    "Intel USB Controller", 
                    "model", 
                    Buffer (0x42)
                    {
                        "Intel Corporation, Series Chipset USB Enhanced Host Controller #1"
                    }, 

                    "device_type", 
                    Buffer (0x0F)
                    {
                        "USB Controller"
                    }, 

                    "AAPL,clock-id", 
                    Buffer (One)
                    {
                         0x01                                             // .
                    }, 

                    "built-in", 
                    Buffer (One)
                    {
                         0x00                                             // .
                    }, 

                    "subsystem-id", 
                    Buffer (0x04)
                    {
                         0x26, 0x8C, 0x00, 0x00                           // &...  <<<<<<<<   Code you
                    }, 

                    "subsystem-vendor-id", 
                    Buffer (0x04)
                    {
                         0x86, 0x80, 0x00, 0x00                           // ....    <<<<<<<  Code you
                    }, 

                    "AAPL,current-available", 
                    0x0834, 
                    "AAPL,current-extra", 
                    0x0898, 
                    "AAPL,current-extra-in-sleep", 
                    0x0640, 
                    "AAPL,device-internal", 
                    0x02, 
                    "AAPL,max-port-current-in-sleep", 
                    0x0834
                })
            }
        }

 

Matgen84
Matgen84
Posted
Posted
5 minutes ago, PG7 said:

◊

Good Morning

 

does anyone have Clover with the latest commit for me to test here, I have a dell but I don't have Xcode installed or anything to compile

 

Thanks in advance

 

Done, Bro :)

 

 

CLOVERX64.efi.zip

  • Thanks 1
chris1111
chris1111
Posted
Posted
13 minutes ago, PG7 said:

◊

Good Morning

 

does anyone have Clover with the latest commit for me to test here, I have a dell but I don't have Xcode installed or anything to compile

 

Thanks in advance

here you go compil from BS

 

Clover_r5126.pkg.zip

  • Like 3
  • Thanks 1
naiclub
naiclub
Posted
Posted
15 minutes ago, PG7 said:

◊

Good Morning

 

does anyone have Clover with the latest commit for me to test here, I have a dell but I don't have Xcode installed or anything to compile

 

Thanks in advance

load

You try this one

  • Like 1
naiclub
naiclub
Posted
Posted
1 hour ago, jlrycm said:

@naiclub, I followed your suggestion and it did not work, the PXSX is not reporting outputs and the USB 3.1 is not loaded properly. I’m more and more convinced that if I figured out how to deal with the change in the AppleUSBXHCIPCI plug-in with respect to ASmedia, I may find the solution. The info.plist of such plug-in in Big Sur is attached for reference. The PCIE USB 3.1 card I have installed is based on ASMedia2142 controller and was natively supported in Catalina.

Info.plist

I looked at your example. Not different from mine but bigsur has more code than catalina, which should have more kext.

Matgen84
Matgen84
Posted
Posted
2 hours ago, jlrycm said:

@naiclub, I followed your suggestion and it did not work, the PXSX is not reporting outputs and the USB 3.1 is not loaded properly. I’m more and more convinced that if I figured out how to deal with the change in the AppleUSBXHCIPCI plug-in with respect to ASmedia, I may find the solution. The info.plist of such plug-in in Big Sur is attached for reference. The PCIE USB 3.1 card I have installed is based on ASMedia2142 controller and was natively supported in Catalina.

Info.plist


@jlrycm In the info.plist, It seems that Apple has replaced Asmedia2142 by Asmedia3142 in some lines. Maybe it's the reason why you've a problem with your card. Unfortunately, I don't know how to make a patch or a specific SSDT, sorry :)

Jief_Machak
Jief_Machak
Posted
Posted
On 11/19/2020 at 6:06 PM, chris1111 said:

@Jief_Machak Interesting :) bdmesg also gives the kexts patch info but differently if I understand

 

  Hide contents 


13:660  0:000  Finally: ExternalClock=25MHz BusSpeed=100000kHz CPUFreq=3300MHz PIS: hw.busfrequency=100000000Hz
13:660  0:000  Beginning OC
13:660  0:000  OCST: Missing vault data, ignoring...
13:669  0:008  config-oc.plist isn't use at all
13:669  0:000  AddKextsInArray from Other
13:669  0:000  ->Extra kext: Other\Lilu.kext (v.1.4.9)
13:669  0:000  ->Extra kext: Other\AirportBrcmFixup.kext (v.2.1.1)
13:669  0:000  ->Extra kext: Other\AppleALC.kext (v.1.5.4)
13:669  0:000  ->Extra kext: Other\IntelMausi.kext (v.1.0.3)
13:669  0:000  ->Extra kext: Other\SMCSuperIO.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\WhateverGreen.kext (v.1.4.4)
13:669  0:000  ->Extra kext: Other\SMCProcessor.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\Marvell-Injector.kext (v.1.1)
13:669  0:000  ->Extra kext: Other\VirtualSMC.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\USBMap.kext (v.1.0)
13:669  0:000  AddKextsInArray from Off
13:669  0:000  AddKextsInArray from 11
13:669  0:000  AddKextsInArray from 11_normal
13:669  0:000  AddKextsInArray from 11.1
13:669  0:000  AddKextsInArray from 11.1_normal
13:669  0:000  AddKextsInArray from 11.1.0
13:669  0:000  AddKextsInArray from 11.1.0_normal
13:669  0:000  Bridge kext to OC : Path=Lilu.kext
13:675  0:006  info plist path: Kexts\Other\Lilu.kext\Contents\Info.plist
13:680  0:004  assign executable as 'Contents\MacOS\Lilu'
13:680  0:000  Bridge kext to OC : Path=VirtualSMC.kext
13:680  0:000  info plist path: Kexts\Other\VirtualSMC.kext\Contents\Info.plist
13:686  0:006  assign executable as 'Contents\MacOS\VirtualSMC'
13:686  0:000  Bridge kext to OC : Path=WhateverGreen.kext
13:686  0:000  info plist path: Kexts\Other\WhateverGreen.kext\Contents\Info.plist
13:690  0:004  assign executable as 'Contents\MacOS\WhateverGreen'
13:690  0:000  Bridge kext to OC : Path=AppleALC.kext
13:690  0:000  info plist path: Kexts\Other\AppleALC.kext\Contents\Info.plist
13:709  0:019  assign executable as 'Contents\MacOS\AppleALC'
13:709  0:000  Bridge kext to OC : Path=IntelMausi.kext
13:709  0:000  info plist path: Kexts\Other\IntelMausi.kext\Contents\Info.plist
13:712  0:003  assign executable as 'Contents\MacOS\IntelMausi'
13:712  0:000  Bridge kext to OC : Path=SMCProcessor.kext
13:712  0:000  info plist path: Kexts\Other\SMCProcessor.kext\Contents\Info.plist
13:717  0:005  assign executable as 'Contents\MacOS\SMCProcessor'
13:717  0:000  Bridge kext to OC : Path=SMCSuperIO.kext
13:717  0:000  info plist path: Kexts\Other\SMCSuperIO.kext\Contents\Info.plist
13:721  0:003  assign executable as 'Contents\MacOS\SMCSuperIO'
13:721  0:000  Bridge kext to OC : Path=AirportBrcmFixup.kext
13:721  0:000  info plist path: Kexts\Other\AirportBrcmFixup.kext\Contents\Info.plist
13:725  0:003  assign executable as 'Contents\MacOS\AirportBrcmFixup'
13:725  0:000  Bridge kext to OC : Path=Marvell-Injector.kext
13:725  0:000  info plist path: Kexts\Other\Marvell-Injector.kext\Contents\Info.plist
13:728  0:002  Bridge kext to OC : Path=USBMap.kext
13:728  0:000  info plist path: Kexts\Other\USBMap.kext\Contents\Info.plist
13:748  0:020  Load OpenRuntime.efi : Status Success
13:748  0:000  Start OpenRuntime.efi : Status Success
13:748  0:000  OC: OcMiscEarlyInit...
13:757  0:008  OC: Watchdog status is 1
13:759  0:002  OC: OpenCore DBG-061-2020-11-19 is loading in Optional mode (0/0)...
13:762  0:002  OC: Boot timestamp - 2020.11.19 14:58:23
13:764  0:002  OCCPU: MP services threads 4 (enabled 4) - Success
13:766  0:002  OCCPU: MP services Pkg 1 Cores 4 Threads 1 - Success
13:771  0:004  OCCPU: Found Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
13:773  0:002  OCCPU: Signature 306C3 Stepping 3 Model 3C Family 6 Type 0 ExtModel 3 ExtFamily 0 uCode 28
13:775  0:002  OCCPU: EIST CFG Lock 1
13:778  0:002  OCCPU: Discovered CpuFamily 6 CpuModel 60 CpuStepping 3 CpuGeneration 6
13:780  0:002  OCCPU: Ratio Min 8 Max 33 Current 33 Turbo 37 37 36 35
13:883  0:102  TscFrequency 3292371801
13:885  0:002  OCCPU: Detected Apple Processor Type: 06 -> 0605
13:888  0:002  OCCPU: CPUFrequencyFromTSC  3292371801Hz  3292MHz
13:892  0:004  OCCPU: CPUFrequency  3292371801Hz  3292MHz
13:895  0:002  OCCPU: FSBFrequency    99768842Hz    99MHz
13:897  0:002  OCCPU: Pkg 1 Cores 4 Threads 4
13:899  0:002  OC: OcLoadNvramSupport...
13:901  0:002  OC: Current version is DBG-061-2020-11-19
13:904  0:002  OC: OcMiscMiddleInit...
13:906  0:002  OC: LoadHandle 0 with BootProtect in  mode - Unsupported
13:908  0:002  OC: OcLoadUefiSupport...
13:911  0:002  OcAppleEventInstallProtocol
13:913  0:002  InternalCreateQueueEvent
13:918  0:004  EventCreateSimplePointerInstallNotifyEvent
13:920  0:002  InternalSimplePointerInstallNotifyFunction
13:923  0:002  InternalRegisterSimplePointerInterface
13:925  0:002  InternalRegisterSimplePointerInterface
13:927  0:002  InternalRegisterSimplePointerInterface
13:930  0:002  OcOSInfoInstallProtocol
13:932  0:002  OCRTC: OcAppleRtcRamInstallProtocol
13:934  0:002  OCRTC: Wake log is 0x00 0x00   0 0x00
13:937  0:002  OcAppleFbInfoInstallProtocol
13:939  0:002  OC: Loading Apple Secure Boot with Disabled (level 0)
13:944  0:004  OCABC: RTDFRG 1 DEVMMIO 0 NOSU 0 NOVRWR 0 NOSB 0 NOHBMAP 0 SMSLIDE 1 WRUNPROT 1
13:946  0:002  OCABC: FEXITBS 0 PRMRG 0 CSLIDE 1 MSLIDE 0 PRSRV 0 RBMAP 1 VMAP 1 APPLOS 0 RTPERMS 1
13:948  0:002  OCABC: Got rendezvous with OpenRuntime r11
13:950  0:002  OCABC: MAT support is 0
13:953  0:002  OC: RBVR 0 DDBR 0
13:955  0:002  OC: Got 0 drivers
13:958  0:002  OCC: Installing GOP (Unsupported) on ConsoleOutHandle...
13:960  0:002  OC: Requested resolution is 1366x768@0 (max: 0) from 1366x768
13:964  0:004  OCC: Requesting 1366x768@0 (max: 0) resolution, curr 0, total 10
13:967  0:002  OCC: Mode 0 - 1920x1080:1
13:969  0:002  OCC: Mode 1 - 640x480:1
13:971  0:002  OCC: Mode 2 - 800x600:1
13:974  0:002  OCC: Mode 3 - 1024x768:1
13:976  0:002  OCC: Mode 4 - 1280x720:1
13:978  0:002  OCC: Mode 5 - 1280x800:1
13:981  0:002  OCC: Mode 6 - 1280x1024:1
13:983  0:002  OCC: Mode 7 - 1440x900:1
13:985  0:002  OCC: Mode 8 - 1400x1050:1
13:990  0:004  OCC: Mode 9 - 1680x1050:1
13:992  0:002  OCC: No compatible mode for 1366x768@0 (max: 0) resolution
13:994  0:002  OC: Changed resolution to 1366x768@0 (max: 0) from 1366x768 - Not Found
13:997  0:002  OCC: Using builtin text renderer with 1 scale
14:005  0:007  OCC: Install console control (B6075A70/0/0), current - Success
14:007  0:002  OCC: Setup ASCII Output - Success
14:009  0:002  OC: Requested console mode is 0x0 (max: 0) from 
14:012  0:002  OC: Requested not to use audio
14:016  0:004  OC: OcLoadPlatformSupport...
14:019  0:002  OC: OcLoadDevPropsSupport...
14:021  0:002  OC: OcMiscLateInit...
14:023  0:002  OC: Invalid HibernateMode: 
14:025  0:002  OC: Translated HibernateMode  to 0
14:028  0:002  OC: Hibernation detection status is Not Found
14:030  0:002  OC: Panic log does not exist
14:032  0:002  OC: OcLoadKernelSupport...
14:035  0:002  OC: All green, starting boot management...
14:037  0:002  DevicePath = PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)/HD(2,GPT,D3B12EBB-E7A0-4AD6-9784-98CB674EDFB6,0x64028,0x1FFB4D00)/VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D3386EEE9BA5904FB52C5ACF72DF87B2)/\4BB9C21C-8F09-3F39-BD5F-A151864A2A72\System\Library\CoreServices\boot.efi
14:040  0:003  OCB: Arch filtering B8E8A018(723512)->B8E8A018(723512) caps 4 - Success
14:064  0:024  GetOSVersion: 11.1 (20C5048k)
14:064  0:000  Will not patch boot.efi
14:064  0:000  === [ PatchSmbios ] =============================
14:064  0:000  insert table 9 for dev 0:0
14:064  0:000  insert table 9 for dev 0:1
14:064  0:000  insert table 9 for dev 19:0
14:064  0:000  insert table 9 for dev 0:0
14:064  0:000  Table 11 present, but rewritten for us
14:065  0:000  Not trusting SMBIOS because it's being sneaky...
14:065  0:000  Detected alternating SMBIOS channel banks
14:065  0:000  Channels: 2
14:065  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
14:065  0:000  SPD data in use:
14:065  0:000  SmbiosTable.Type17->Vendor = Micron Technology
14:065  0:000  SmbiosTable.Type17->SerialNumber = 0EFA7382
14:065  0:000  SmbiosTable.Type17->PartNumber = 16JTF1G64AZ-1G6E1E1
14:065  0:000  SMBIOS Type 17 Index = 0 => 0 0:
14:065  0:000  BANK 0 DIMM0 1600MHz 8192MB(Ext:0MB)
14:065  0:000  SPD data in use:
14:065  0:000  SmbiosTable.Type17->Vendor = Micron Technology
14:065  0:000  SmbiosTable.Type17->SerialNumber = 0EFA73AC
14:065  0:000  SmbiosTable.Type17->PartNumber = 16JTF1G64AZ-1G6E1E1
14:065  0:000  SMBIOS Type 17 Index = 1 => 1 2:
14:065  0:000  BANK 1 DIMM0 1600MHz 8192MB(Ext:0MB)
14:065  0:000  SMBIOS Type 17 Index = 2 => 2 1:
14:065  0:000  BANK 0 DIMM1 EMPTY
14:065  0:000  SMBIOS Type 17 Index = 3 => 3 3:
14:065  0:000  BANK 1 DIMM1 EMPTY
14:065  0:000  mTotalSystemMemory = 16384
14:065  0:000  NumberOfMemoryDevices = 4
14:065  0:000  Type20[0]->End = 0x7FFFFF, Type17[0] = 2000
14:065  0:000  Type20[1]->End = 0xFFFFFF, Type17[1] = 6000
14:065  0:000  Table 131 is present, CPUType=35
14:065  0:000  Change to: 605
14:065  0:000  === [ PatchACPI ] ===============================
14:065  0:000  Xsdt reallocation done
14:065  0:000  old FADT length=10C
14:065  0:000   SignatureFixup: 0xE35F0827 -> 0x0
14:065  0:000  Found OperationRegion(GNVS, SystemMemory, C9A00C18, ...)
14:065  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
14:065  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
14:065  0:000  Found OperationRegion(MCA1, SystemMemory, F7FE0000, ...)
14:065  0:000  Found OperationRegion(MCA1, SystemMemory, F7FE0000, ...)
14:065  0:000  Found OperationRegion(CPSB, SystemMemory, C98F4E18, ...)
14:065  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
14:065  0:000  Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
14:065  0:000  Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
14:065  0:000  Found OperationRegion(VECT, SystemMemory, C9F64018, ...)
14:068  0:003  DSDT found in Clover volume: \EFI\CLOVER\ACPI\patched\DSDT.aml
14:069  0:000  Apply DsdtFixMask=0x10000000
14:069  0:000  === [ FixBiosDsdt ] =============================
14:069  0:000  OperationRegion (GNVS...) corrected from 0xD9A00C18 to addr=0xC9A00C18
14:069  0:000    indirect name=SRCB
14:069  0:000    indirect name=SRMB
14:069  0:000    indirect name=SRMB
14:069  0:000  OperationRegion (CPSB...) corrected from 0xD98F5E18 to addr=0xC98F4E18
14:070  0:000  OperationRegion (VECT...) corrected from 0xD9F64018 to addr=0xC9F64018
14:070  0:000  PreCleanup XSDT: count=13, length=140
14:070  0:000  PreCleanup XSDT, corrected XSDT: count=13, length=140
14:070  0:000  === [ ACPIPatchedAML ] ==========================
14:070  0:000  AutoMerge pass 1
14:070  0:000  Unsorted
14:070  0:000  Inserting SSDT.AML from \EFI\CLOVER\ACPI\patched: ignore on pass 1
14:070  0:000  Inserting SSDT-ARPT.aml from \EFI\CLOVER\ACPI\patched: ignore on pass 1
14:070  0:000  === [ ACPIDropTables ] ==========================
14:070  0:000  === [ DropSSDT ] ================================
14:070  0:000  Drop tables from XSDT, SIGN=SSDT TableID= Length=0
14:070  0:000   Table[3]: SSDT  Cpu0Ist  1337 dropped
14:070  0:000   Table[4]: SSDT  CpuPm  2776 dropped
14:070  0:000   Table[5]: SSDT  LakeTiny  455 dropped
14:070  0:000   Table[8]: SSDT  SataTabl  877 dropped
14:070  0:000   Table[9]: SSDT  SaSsdt   13452 dropped
14:070  0:000   Table[10]: SSDT  WMI  26255 dropped
14:070  0:000  === [ ACPIPatchedAML ] ==========================
14:070  0:000  AutoMerge pass 2
14:070  0:000  Unsorted
14:070  0:000  Inserting SSDT.AML from \EFI\CLOVER\ACPI\patched: size=1827 ... Success
14:071  0:001  Inserting SSDT-ARPT.aml from \EFI\CLOVER\ACPI\patched: size=190 ... Success
14:072  0:000  ApicCPUNum=4
14:072  0:000  Cleanup XSDT: count=15, length=156
14:072  0:000  corrected XSDT count=9, length=108
14:072  0:000  === [ RestSetup macOS ] =========================
14:072  0:000  NVidia GFX injection not set
14:072  0:000  Intel HD Graphics 4600 [8086:0412] :: PciRoot(0x0)\Pci(0x2,0x0)
14:072  0:000    ig-platform-id = 0x0d220003
14:072  0:000  Intel GFX revision  = 0x6
14:072  0:000  stringlength = 2160
14:072  0:000  CurrentMode: Width=1920 Height=1080
14:075  0:003  Use origin smbios table type 1 guid.
14:080  0:004  Custom boot screen not used because entry has unset use graphics

 

 

Sorry, I didn't get a notification and saw your post late.

What bdmesg gives is the same as preboot.log.

And that : 

13:669  0:000  AddKextsInArray from Other
13:669  0:000  ->Extra kext: Other\Lilu.kext (v.1.4.9)
13:669  0:000  ->Extra kext: Other\AirportBrcmFixup.kext (v.2.1.1)
13:669  0:000  ->Extra kext: Other\AppleALC.kext (v.1.5.4)
13:669  0:000  ->Extra kext: Other\IntelMausi.kext (v.1.0.3)
13:669  0:000  ->Extra kext: Other\SMCSuperIO.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\WhateverGreen.kext (v.1.4.4)
13:669  0:000  ->Extra kext: Other\SMCProcessor.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\Marvell-Injector.kext (v.1.1)
13:669  0:000  ->Extra kext: Other\VirtualSMC.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\USBMap.kext (v.1.0)

is not the injection order. Look further down, lines coming from OC.

 

 

 

chris1111
chris1111
Posted
Posted
19 minutes ago, Jief_Machak said:

Sorry, I didn't get a notification and saw your post late.

What bdmesg gives is the same as preboot.log.

And that : 


13:669  0:000  AddKextsInArray from Other
13:669  0:000  ->Extra kext: Other\Lilu.kext (v.1.4.9)
13:669  0:000  ->Extra kext: Other\AirportBrcmFixup.kext (v.2.1.1)
13:669  0:000  ->Extra kext: Other\AppleALC.kext (v.1.5.4)
13:669  0:000  ->Extra kext: Other\IntelMausi.kext (v.1.0.3)
13:669  0:000  ->Extra kext: Other\SMCSuperIO.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\WhateverGreen.kext (v.1.4.4)
13:669  0:000  ->Extra kext: Other\SMCProcessor.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\Marvell-Injector.kext (v.1.1)
13:669  0:000  ->Extra kext: Other\VirtualSMC.kext (v.1.1.8)
13:669  0:000  ->Extra kext: Other\USBMap.kext (v.1.0)

is not the injection order. Look further down, lines coming from OC.

 

 

 

Everything work normal whitout  injection order. 373695373.png.92c4e8bc0b2a38ac5cbc8da7a204ae44.png

maclinuxG4
maclinuxG4
Posted
Posted

the order of loaded kext is herafter 

13:669  0:000  AddKextsInArray from 11.1.0
13:669  0:000  AddKextsInArray from 11.1.0_normal
13:669  0:000  Bridge kext to OC : Path=Lilu.kext
13:675  0:006  info plist path: Kexts\Other\Lilu.kext\Contents\Info.plist
13:680  0:004  assign executable as 'Contents\MacOS\Lilu'
13:680  0:000  Bridge kext to OC : Path=VirtualSMC.kext
13:680  0:000  info plist path: Kexts\Other\VirtualSMC.kext\Contents\Info.plist
13:686  0:006  assign executable as 'Contents\MacOS\VirtualSMC'
13:686  0:000  Bridge kext to OC : Path=WhateverGreen.kext
13:686  0:000  info plist path: Kexts\Other\WhateverGreen.kext\Contents\Info.plist
13:690  0:004  assign executable as 'Contents\MacOS\WhateverGreen'
13:690  0:000  Bridge kext to OC : Path=AppleALC.kext
13:690  0:000  info plist path: Kexts\Other\AppleALC.kext\Contents\Info.plist
13:709  0:019  assign executable as 'Contents\MacOS\AppleALC'
13:709  0:000  Bridge kext to OC : Path=IntelMausi.kext
13:709  0:000  info plist path: Kexts\Other\IntelMausi.kext\Contents\Info.plist
13:712  0:003  assign executable as 'Contents\MacOS\IntelMausi'
13:712  0:000  Bridge kext to OC : Path=SMCProcessor.kext
13:712  0:000  info plist path: Kexts\Other\SMCProcessor.kext\Contents\Info.plist
13:717  0:005  assign executable as 'Contents\MacOS\SMCProcessor'
13:717  0:000  Bridge kext to OC : Path=SMCSuperIO.kext
13:717  0:000  info plist path: Kexts\Other\SMCSuperIO.kext\Contents\Info.plist
13:721  0:003  assign executable as 'Contents\MacOS\SMCSuperIO'
13:721  0:000  Bridge kext to OC : Path=AirportBrcmFixup.kext
13:721  0:000  info plist path: Kexts\Other\AirportBrcmFixup.kext\Contents\Info.plist
13:725  0:003  assign executable as 'Contents\MacOS\AirportBrcmFixup'
13:725  0:000  Bridge kext to OC : Path=Marvell-Injector.kext
13:725  0:000  info plist path: Kexts\Other\Marvell-Injector.kext\Contents\Info.plist
13:728  0:002  Bridge kext to OC : Path=USBMap.kext
13:728  0:000  info plist path: Kexts\Other\USBMap.kext\Contents\Info.plist
PG7
PG7
Posted
Posted
3 hours ago, Matgen84 said:

Done, Bro :)

 

 

CLOVERX64.efi.zip

 

3 hours ago, chris1111 said:

here you go compil from BS

 

Clover_r5126.pkg.zip

Merci Friends 

3 hours ago, mifjpn said:

It's freshly made!

Clover_r5126-b7f395585674560dceee9ab2f987dd6292f589b0.pkg

Thanks 

 

  • Like 3
PG7
PG7
Posted
Posted (edited)

clover r5126

 

I come here to post two problems that I encounter and can be solved (at least I think)

 

- I use an Atheros ar9285 Wifi and then I got the kext here

 

- I tested it a lot and I even managed to get it to work, but it is incomprehensible to know why it works one hour and then it may not work!

 

- I tested with OpenCore and with FUnciona all the time! and that's until I can get it to work on Clover

 

- did some tests and my result is the order of loading the kext by Clover
if we manage to apply a correct order the Wifi works Normal with Clover

 

- I have the same problem with a touchpad kext for ALPS ps2 pro Dell
in OpenCore it loads and works normal, in Clover it happens the same as with the Wifi kext (in previous versions of macOS it works without problems)

 

- I got a debug and a preboot where everything is working with Clover and another where NAO works
for me the order of loading the kext is the problem

 

- I leave the debugs for you to analyze and certainly advise me the indicated way to do it

 

- I tried to install the kext with Chris Droplet in L / E but it doesn't work

 

 since already Thanks to all and good weekend

preboot-funciona o touchpad com a boa kext.log

debug-funciona o touchpad com a boa kext.log

debug-Atheros+touchpad OK.log

preboot-Atheros+touchpad OK.log

Edited by PG7
  • Like 2
Jief_Machak
Jief_Machak
Posted
Posted
On 11/20/2020 at 6:49 PM, mifjpn said:

Thank you as always

It seems that there was a person who tried it at a Japanese forum.
The following is automatic translation.
------
Anonymous
The guests

It's not directly related to Big Sur, but I think Clover will be updated to 5126.
I will write it here.
When I put Big Sur + Clover 5126 in Thinkpad X240, I modified Voodoo PS2 for X240.
The Controller is loaded, but the Trackpad under it is no longer loaded.
In the end, the cause was that "/ EFI ~ kext / Contents / MacOS / file name" was long.

(NG)
VoodooPS2Controller_ThinkpadX240.kext / Contents / PlugIns / VoodooPS2Trackpad_ThinkpadX240.kext
(OK)
VoodooPS2Controller_X240.kext / Contents / PlugIns / VoodooPS2Trackpad_X240.kext

When the file name is shortened little by little, it seems NG if the length of / EFI ~ is 140 characters or more.
No problem with Clover5107, no problem with the original Voodoo PS2 (because the file name is short)
So I spent a whole day investigating.
I don't think anyone would give it such a long file name, but this is just an example.
------

Long names related to Voodoo seem to need attention.
I will tell the story of Jief to Japan.

Thank you,

Tell Japan it’s fixed.

thanks.

  • Like 1
  • Thanks 1
jlrycm
jlrycm
Posted
Posted
On 11/20/2020 at 2:00 PM, Matgen84 said:


@jlrycm In the info.plist, It seems that Apple has replaced Asmedia2142 by Asmedia3142 in some lines. Maybe it's the reason why you've a problem with your card. Unfortunately, I don't know how to make a patch or a specific SSDT, sorry :)

@iCanaro, @Matgen84, I checked with the vendor and this is what they responded.

C388ED7F-AA59-4280-A309-8F5EF8829598.png

  • Like 2
 Share
Go to topic listing
×
×
  • Create New...