qaz012 Posted August 28, 2012 Share Posted August 28, 2012 Tseug, thanks again for your method of installation. Almost perfect. Only one problem - mouse lag in safari, quicktime, etc. I had to install the latest chameleon (2.1svn-r2050) and then replace org.chameleon.Boot.plist and smbios.plist in Extra folder for the original ones. Looks like it's good now. Link to comment Share on other sites More sharing options...
pevla Posted September 1, 2012 Share Posted September 1, 2012 Hi all i would like to ask you a question before trying the ML install. First of all a HUGE than you to Tseug! for the guide. I am absolutely new to Hackintoshing, just set up Leopard on my PC after 3 days of trying Snow leo, and Lion with no success. I have the feeling that the problem is my GPU. here are my system specs Gigabyte P35-DS4 v2.0 F14 (same as Tseug) Intel Core 2 QUAD Q6600 2.4GHz 4GB RAM Gigabyte GV-RX387512H (Radeon HD3870) Graphics card Onboard sound card Should i go ahead and try the guide or do I need a different graphics card? Anyone tried this card? Any help would be appreciated. Thanks a lot! I also attach the info i took from system profiler before installing Leopard. I have the v2.0 of the P35-DS4. Can I still use the v2.1 install files? I would also need the BIOS settings please Link to comment Share on other sites More sharing options...
remenic Posted September 2, 2012 Share Posted September 2, 2012 Just wanted to let you know that installation was a breeze on ASRock H55M Pro. The only thing that didn't work was sound, but VoodooHDA 2.7.4 fixed that as well. The only thing that's bothering me now is that I can only use one display. I'm using a Geforce GTS 250 with two displays attached (one VGA and one DVI->VGA). Could anyone tell me how to enable the second display? Link to comment Share on other sites More sharing options...
pevla Posted September 2, 2012 Share Posted September 2, 2012 Well I went ahead and installed it. No luck though!!! All the steps worked but after finalize and reboot I get a half white half black screen. I hear the instructions about voice over commands etc but no visual ! I got my answer I guess, my graphics card is NOT supported. Any info for a cheap card that will work? Thanks Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 I am getting the Asus Geforce 210 Silent 1Gb DDR3 this afternoon. It is supposed to be compatible with mountain lion Will keep you posted PS why doesn't anyone reply with any tips? I thought this was a forum to help each other!!! Link to comment Share on other sites More sharing options...
iFIRE Posted September 3, 2012 Share Posted September 3, 2012 http://wiki.osx86project.org/wiki/index.php/Main_Page Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 Thanks iFire already checked it though! I will go with the GeForce 210 cause it's only 30 euros Will post results Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 So I managed to install lion and the new graphics card fully supported! I used iATKOS L2 When I tried to install mountain lion while loading from the USB stick, the PC goes into sleep mode after 10-15 secs!!!!????? With the old graphics card I was able to install the whole thing as I say in my first post. I would really like to install Mountain Lion Any ideas? Update I used GraphicsEnabler=Yes and PCIRoot=1 It is loading as we speak. Fingers crossed Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 Success!!!! Now can someone tell me how to do a dual boot with Win7? Can someone actually answer this time please? Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 So, I went into disk utility and shrunk the MountainLion disk to 20Gb, then added another partition 45Gb in FAT I installed Win7 in the second partition. Booted from the USB again and did finalize and reboot. The PC keeps booting up in Windows without the usb plugged in. Any solution to this or do I have to do everything from the beginning and install Windows first to and MacOs second? Please, someone reply!!! Link to comment Share on other sites More sharing options...
iFIRE Posted September 3, 2012 Share Posted September 3, 2012 install win first, then install ML , install chameleon bootloader in ML and you have dual boot Win/Mac Os Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 thanks iFire is there any way to fix it now without going through all the installations again?! Link to comment Share on other sites More sharing options...
iFIRE Posted September 3, 2012 Share Posted September 3, 2012 use app chameleon Wizard and install Boot0hfs for partition MAC OS , see if this work, or than you need repair boot wind partition with DVD WIN, because when you install chameleon it wrong boot Win and you need repair this. For win: How to restore WINDOWS BOOTLOADER on a PC 1~Reconfigure your BIOS to boot from the DVD first and then the Win7 drive 2~Boot the machine from the Win7 DVD 3~After the language select screen, choose "Repair your computer" from the lower left 4~The system will not find any installations. This is okay, click the top radio button and hit Next 5~You'll see a list of "System Recovery Options". Open up the Command Prompt 6~Try typing the following commands in order: "bootrec /fixmbr", "bootrec /fixboot", "bootrec /rebuildbcd". If these complete successfully, go ahead and skip the next step. However, if any of these steps reports "Element cannot be found" you need to reconfigure the disk configuration. 7~You're going to use DISKPART to make the Win7 partition active. You can type "HELP" for a list of commands or check out Microsoft's help page. Basically you select the drive first ("LIST DRIVES" and then "SELECT DRIVE [number]") and then the partition ("LIST PARTITION" and then "SELECT PARTITION [number]") where Win7 is installed. Then type "ACTIVE" to make the selected partition active. Once this is finished, repeat the previous step. 8~With the bootloader now created, we need to let Win7 configure it. Restart and boot from the DVD again, and choose the same repair option as before. Now you should see your Win7 installation listed. Allow the installer to repair the system. ~You may have to repeat this step once or twice, but eventually the bootloader will be fixed and your machine will work again! Very complicate this , but can work. Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 Many many thanks iFIRE but it looks very complicated!!! can you tell me how to use app chameleon Wizard and install Boot0hfs for partition MAC OS ? I will try this Link to comment Share on other sites More sharing options...
iFIRE Posted September 3, 2012 Share Posted September 3, 2012 Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 Thank you friend Link to comment Share on other sites More sharing options...
pevla Posted September 3, 2012 Share Posted September 3, 2012 Boot0hfs did not work. Tomorrow I will try the windows fix Thank you Link to comment Share on other sites More sharing options...
pevla Posted September 6, 2012 Share Posted September 6, 2012 Hi again! Can someone tell me how should i format my SSD 64Gb in order to have dual boot ML and Win7? GUID or MBR? In which partition should i install which OS? Thanks Link to comment Share on other sites More sharing options...
pevla Posted September 6, 2012 Share Posted September 6, 2012 I formatted MBR 2 partitions, installed windows and when tried ML this happened So only GUID? Will the dual boot work? Link to comment Share on other sites More sharing options...
iFIRE Posted September 8, 2012 Share Posted September 8, 2012 yes is ok, but BEFORE of install you need format the disk ML, go for menubar Utilities/Disk Utility and format your disk MAC os hfs+ Journaled, take out the app DiskUtility and install ML Link to comment Share on other sites More sharing options...
boxer82003 Posted September 9, 2012 Share Posted September 9, 2012 I'm getting this error in terminal when running the command in step 4 Attaching OS X Mountain Lion... hdiutil: attach failed - No such file or directory What am i missing? Thanks Link to comment Share on other sites More sharing options...
iFIRE Posted September 9, 2012 Share Posted September 9, 2012 ok, now I understand your problem, for install ML for MBR you need two Patch in your installer ML, look in google ML MBR Patch Link to comment Share on other sites More sharing options...
darkcosmos Posted September 11, 2012 Share Posted September 11, 2012 Followed this installation, trying to now install ML and getting this, any ideas? Sony Vaio SVE1511L1EW.CEK Intel HD 3000 Graphics 4GB DDR3 RAM Intel core i5 Link to comment Share on other sites More sharing options...
pevla Posted September 12, 2012 Share Posted September 12, 2012 Go to your BIOS settings and change IDE to AHCI Mac OS X can't see IDE. I think this should solve your problem Link to comment Share on other sites More sharing options...
SANTA19 Posted September 12, 2012 Share Posted September 12, 2012 Hi Tseug! I have a short question to 10.8.1 with no sound on a GA-P35-DS4 with F14 BIOS. I tried to get the sound working but with no success. I made a clean install with a different installation guide and no DSDT. So everything is working but no sound. I'm not used to work with DSDT, that is why I've not tried to fix it with editing a DSDT. Is there a simple way to exchange the native appleHDA.kext with a fixed one, or do i mix up everything here? Sorry for being a noob on that... What can I do to get sound working easily? greetz Link to comment Share on other sites More sharing options...
Recommended Posts