prince2k Posted January 21, 2006 Share Posted January 21, 2006 Dell Wireless WLAN 1350 Mini-PCI Card (Broadcom) Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-45649 Share on other sites More sharing options...
gonzo.damn Posted January 21, 2006 Share Posted January 21, 2006 I'm Using an Encore ENL832-TX-RENT...natively, detected as Built-In Ethernet....it has the RTL-8139D Chip...ahahaha....it cost aroud 5 bucks in Chile...hehehehe...the best buy i could ever done for my OSX86 Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-45742 Share on other sites More sharing options...
dutchbird737 Posted January 24, 2006 Share Posted January 24, 2006 As my Via Rhine III Built-in did not work I plugged in an Intel 21143 based ethernet card (10/100mbit). It works flawlessly! Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-47597 Share on other sites More sharing options...
KnightTyper Posted January 26, 2006 Share Posted January 26, 2006 Unfortunately the Broadcom 5752 onboard doesn't work. This is the new chipset on the new HP Workstations. But the graphics is well supported! Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-48707 Share on other sites More sharing options...
Janus Posted January 26, 2006 Share Posted January 26, 2006 Onboard NVidia Networking controller didn't work, so I went to the local hardwarestore and purchased a $8 Sweex 10/100Mbit card. These all have a Realtek RTL8139 chip, so should work out of the box. And it does! Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-48982 Share on other sites More sharing options...
rollfaster Posted January 31, 2006 Share Posted January 31, 2006 Dlink DFE-530TX+ Rev F1 doesn't work, like its brother rev C1. This is a card currently at CompUSA, but sorry. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-50712 Share on other sites More sharing options...
wmarsh Posted February 4, 2006 Share Posted February 4, 2006 Here is the 1.2.0 tulip kext compiled for 8f1111 http://forum.osx86project.org/index.php?sh...c=6115&hl=tulip Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-52668 Share on other sites More sharing options...
temis Posted February 8, 2006 Share Posted February 8, 2006 Marvell Yukon 88E8053 works now with 10.4.4 AppleYukon.kext located in IONetworkingFamily.kext/Contents/Plugins Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-54188 Share on other sites More sharing options...
krrr Posted February 13, 2006 Share Posted February 13, 2006 humm, doing a serious dig everywhere, going to install tulip from source now. got deadmoo's installed. below is my NEW USB-ETHERNET dongle now. --------------------------------------------------------------- [anshu@Fedora4 wireless]$ dmesg | grep pegasus pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver pegasus 1-2:1.0: setup Pegasus II specific registers pegasus 1-2:1.0: eth1, ADMtek ADM8511 "Pegasus II" USB Ethernet, 00:00:4e:11:16:c6 usbcore: registered new driver pegasus --------------------------------------------------------------------- Any tips for me? will this work? Help !. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-55981 Share on other sites More sharing options...
gt500 Posted February 16, 2006 Share Posted February 16, 2006 Has anyone made it setting up a US Robotics Wireless PCI card ? USR5416 I tried it with the tulip drivers , well , i think i did ... i followed the steps .. but i didn't seem to succeed. I couldn't find the device/vendor ID's plz comment Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-57469 Share on other sites More sharing options...
amorfeusz Posted February 21, 2006 Share Posted February 21, 2006 I got my Dlink DFE-530TX+ to work under 10.4.4 by simply replacing the (Jan 3rd) version of IONetworkingFamily.kext with the one from 10.4.3 (Oct 29,2005). Otherwise it wouldn't detect it even when using Dlink's own drivers. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-59367 Share on other sites More sharing options...
merak Posted February 22, 2006 Share Posted February 22, 2006 my wmp54g wireless pci, wit 2500, works wonderfuls wiv the new driver gorgeous man!! ver 10.4.3 Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-60555 Share on other sites More sharing options...
bluerose Posted February 22, 2006 Share Posted February 22, 2006 I got my Dlink DFE-530TX+ to work under 10.4.4 by simply replacing the (Jan 3rd) version of IONetworkingFamily.kext with the one from 10.4.3 (Oct 29,2005). Otherwise it wouldn't detect it even when using Dlink's own drivers. Can you send me that IONetworkingFamily.kext (Oct 29,2005) file? I'm using 10.4.3 Jas patch but no luck for my Lan card(same as u). I dont want what is the date and version of my current kext, how can u check that? Pls pls send me the file :X Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-60744 Share on other sites More sharing options...
harrybelly Posted February 23, 2006 Share Posted February 23, 2006 Marvell Yukon 88E8053 works now with 10.4.4 AppleYukon.kext located in IONetworkingFamily.kext/Contents/Plugins Marvell Yukon 88E8050 works with .plist edit http://forum.osx86project.org/index.php?showtopic=9707 Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-61392 Share on other sites More sharing options...
merak Posted February 23, 2006 Share Posted February 23, 2006 wmp64g-wireless pcs it does works well wiv the drivers for 10.4.3 but i'm not able to enter the network config menu, it keep crashing so i can't assign a static ip to my machine.... there's a driver version for the 10.4.4 version of the same card? Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-61743 Share on other sites More sharing options...
ChaosVx Posted March 1, 2006 Share Posted March 1, 2006 I'm using a Realtek RLT8931D and it just doesn't get detected , nothing happens and i can't connect . I'm using Mac OS X 10.4.3 8F1111 ( i think with the JaS 1111 Patch ) . I would be really glad if someone could help me . Thanks , Chaos Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-66680 Share on other sites More sharing options...
chex Posted March 3, 2006 Share Posted March 3, 2006 same here Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-67956 Share on other sites More sharing options...
Blackice Posted March 4, 2006 Share Posted March 4, 2006 I have a VIA Rhine III onboard, and it doesn't work. Or, well, it half-works: 1. System profiler recognises On-Board Ethernet, en0 2. Under 10.4.1, the card worked flawlessly but Network Setup has my ethernet card there as en0, just greyed out. It's deselected, and since it's greyed out, I can't select it. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-68486 Share on other sites More sharing options...
Wolli Posted March 6, 2006 Share Posted March 6, 2006 Yes, the Netgear GA311 works in gigabit mode. hello. this is my first post. i installed 10.4.5 on my P4, 2,8 ghz. but now i need another ethernet-card, because my gigabit-card (onboard) doesn't work. i have two other ethernet-cards who work there, but they are just 10/100er cards. and i want one with gigabit... as i saw in the forum, it looks like that the card "Netgear GA311" is the one and only gigabit card that works. but i saw too, that there are some problems with 10.4.4. how it looks like in 10.4.5? i found this card in a online-shop (http://www.byteline.ch/index.php?cmd=show_item&target=18546). but i'm not sure, is this the right one? the product name is "Netgear PCI GA311 IS Gigabit". it would be great if me someone can help. thanks, wolli Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-70117 Share on other sites More sharing options...
ModeZt Posted March 9, 2006 Share Posted March 9, 2006 i've got 3Com 905 it's not working on my 10.4.4 =((( in the system.log i see two lines about it "Couldn't alloc class "Apple3Com3C90x" "Couldn't alloc class "Apple3Com3C90xB" need help.. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-72317 Share on other sites More sharing options...
zbandito Posted March 10, 2006 Share Posted March 10, 2006 My board has 2 NICs built in; Asus A8N-SLI Deluxe, Marvell 88E81001 PCI Gigabit LAN Controller (0x432011ab) (Onboard) -- Not working Asus A8N-SLI Deluxe, NForce4 Gigabit -- Not working I added the Marvell device/vendor ID (0x432011ab) to the AppleYukon.kext/Content/Info.plist and the NIC showed up in the list in System Preferences, and the connection lit up on the switch showing gigabit connection. However, System Preferences reports that the cable is not plugged in, while MenuMeters shows en0 as a 10mbps interface... Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-72525 Share on other sites More sharing options...
duggyuk Posted March 11, 2006 Share Posted March 11, 2006 native install Realtek 8139 (onboard) works fine MiniPCI (internal card) Gigabyte GN WIAG02 - works fine no hacks tweaks needed for any of them, toshiba A30-514 latop. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-73177 Share on other sites More sharing options...
Inverted Posted March 12, 2006 Share Posted March 12, 2006 I'm running 10.4.4 build 8G1165 My onboard Davicom 9102 controller didn't work. Then I installed a Netgear FA311 and that also didn't work. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-73701 Share on other sites More sharing options...
Xenokira Posted March 12, 2006 Share Posted March 12, 2006 bought a wireless Netgear WG511T on ebay for $23 incl. shipping. Its a PCMCIA card, and recognized as a Airport card as long as the card is inserted when OSX is booted, if I insert the card after the boot, OSX doesn't see it. Atheros chipset. Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-73706 Share on other sites More sharing options...
bigmatt Posted March 13, 2006 Share Posted March 13, 2006 I have 10.4.4 installed and I need the stuff for my network card to work its realtek 8139 and from what i know i need some files from 10.4.3 or darwin? can somebody PM with the info, or give me the info on where to get them from without really posting a link. Also would it be possible to get that file from the darwin x86 cd? cause i see it, but i dont know what to do with it. sorry i'm kind of n00b to this thing. thx Link to comment https://www.insanelymac.com/forum/topic/258-what-network-cards-work/page/6/#findComment-74471 Share on other sites More sharing options...
Recommended Posts